Hudson Medical Bariatric 3 Supreme User Manual
Size Selecon of the Pressure EEZ®
Supreme™ Wheelchair Cushion
Simply select the cushion that would match the width of your hips when
seated. Cushion size should not be determined by the wheelchair seat
width. Improper cushion fit will affect the performance of pressure distribuon of the cushion and its proper posioning support of the body.
The length of the cushion should be determined by placing the cushion
at the back of the wheelchair while the length extends to the front within
1" to 2" from the back of the knees. The ischial tuberosies (sing bones)
should be centered in the seat in the center of the back seang area.
The footrest should be adjusted properly in order to enhance seang
comfort and help to lower peak seang pressures. In order to prevent the
Supreme™ Cushion from sliding on the wheelchair upholstery, especially
during transfers, follow these instrucons.
Step 1. Thoroughly clean the surface of the
wheelchair seat.
Step 2. Peel off the paper backing of the Velcro®
strip provided and place 2" from the front, in the
center of the wheelchair seat, as shown.
Step 3. Place the cushion on the wheelchair. The
Velcro® strip on the boom of the upholstered
Supreme™ Cushion as well as the non-slip surface
and the Velcro® strip placed on the seat will
prevent sliding when changing body posion
while seated.
™
THE
THE
SUPREME
SUPREME
3” Wheelchair Cushion
Now with Poly-Lite
Maximum Pressure Relief & Support
™
for
To Clean the Cover
Remove the cover from the seat cushion. Machine wash in lukewarm
water and air dry. No ironing is required.
To Clean the Molded Foam Core
Simply spot clean or wipe with moist warm cloth. Avoid submerging in
water.
The Supreme™ Cushion Warranty
Under normal use Hudson Medical guarantees the Supreme™ Cushion to be
free from defects in material and workmanship for a period of 24 months from
the date of purchase. Should defect occur, the cushion should be returned by
the customer to the place of purchase with original sales receipt. Hudson
Medical will determine if it is a manufacturing defect and replace or repair the
cushion without charge. This warranty does not apply to punctures, tears and
burns to the cushion or removable cover.
MEDICAL PRODUCTS DIVISION
Richmond, Virginia 23231 • 800-343-8112
www.hudsonindustries.com
I275863/1209
With Progressive Support Technology
(PST) for Custom Comfort
User Instrucon Manual & Warranty
SKIN PROTECTION & POSITIONING – E2607 & E2608
MEDICAL PRODUCTS
HUDSON
Use and Applicaon of the Pressure EEZ® Supreme™ Cushion
for Posioning for Pressure Relief and Comfort
The Pressure EEZ® Supreme™ Cushion with Poly-Lite™ reduces the
likelihood of pressure sores by reducon of pressure while posioning for
comfort and safety.
THE
THE
™
SUPREME
SUPREME
3” Wheelchair Cushion
Designed for Equalization and Positioning to
Maximize Pressure Relief, Support and Comfort
Molded Foam Core with (PST)
Progressive Support Technology
PST produces the right degree of cushion
firmness. Smaller, lightweight clients receive
a soer more compliant cushion, average
weight clients a medium firmness and larger
heavier clients receive a firmer more supportive cushion. The unique construcon of high
resilient (HR) molded foam provides maximum
stabilizaon, posioning, pressure relief and
correct seang posture.
Poly-Lite™ Pressure Relief Bladders
The inner liner membrane has bladders
filled with Poly-Lite™. A unique proprietary
super lightweight microspherical polymer that
provides the lowest pressure readings while
seated reducing the likelihood of pressure
sores. Poly-Lite™ weights 25% the weight of
gel, silicone or water and will not freeze, heat
up, evaporate, dry out, harden, separate,
boom-out, support a flame and is non-toxic.
The Supreme™ Cover
Outer cover is a removable, washable,
flame retardant, stretch polyester knit to
reduce interface pressure and shearing. It is
constructed with a vapor permeable moisture
proof urethane backing and a non-slip boom
for comfort and safety.
PST SIZE RANGES
Firmness Cushion Width
So 10" to 14"
Medium 16" to 18"
Firm 20" to 24"
Equalizaon of Pressure
The Pressure EEZ® Supreme™ Cushion is manufactured with a flexible
urethane membrane casing with bladders of new Poly-Lite™; a unique
super lightweight microspherical polymer gel (weighs 1/4 the weight of
silicone or any other aqueous based gel) that has been radio frequency
sealed for strength and to prevent leakage. The Poly-Lite™ bladders are
strategically placed in the coccyx, ischial tuberosity and thigh area to reduce
pressure and allow capillary blood flow.
Posioning for Comfort and Safety
The Pressure EEZ® Supreme™
Cushion is uniquely designed using
a high resilient (HR), custom molded
foam core that posions the body in
the correct seang posture, provides
a leg abducon post to prevent leg
rotaon and abrasion. The Pressure
EEZ® Supreme™ Cushion is strategically contoured to provide opmum
seang posture. The Pressure EEZ®
Supreme™ with Poly-Lite™ remains
cool and combined with the
breathable moisture barrier cover,
the body remains cool, dry and
comfortable.
Flexible Moisture
Proof Bladder
Radio Frequency
Sealed to
Prevent
Leakage
Leg Abduction
Post Prevents
Hip Rotation
and Abrasion
High Density Molded
Urethane Foam for
Positioning, Support
and Comfort
Poly-Lite™ for
Pressure Relief
Air Vents on Each Side
to Evacuate Contained
Air in the Molded
Foam Base
The Supreme™ Wheelchair Cushion
is Available in the Following Sizes:
Units/ Medicare Weight
Item No. Size Case Code Capacity Warranty
2751212 12” x 12” x 3” 1 E2607 275 24 Months
2751214 12” x 14” x 3” 1 E2607 275 24 Months
2751414 14” x 14” x 3” 1 E2607 275 24 Months
2751416 14” x 16” x 3” 1 E2607 275 24 Months
275663 16” x 16” x 3” 1 E2607 275 24 Months
275683 16” x 18” x 3” 1 E2607 275 24 Months
275603 16” x 20” x 3” 1 E2607 275 24 Months
275863 18” x 16” x 3” 1 E2607 275 24 Months
275883 18” x 18” x 3” 1 E2607 275 24 Months
275803 18” x 20” x 3” 1 E2607 275 24 Months
275063 20” x 16” x 3” 1 E2607 275 24 Months
275083 20” x 18” x 3” 1 E2607 275 24 Months
275003 20” x 20” x 3” 1 E2607 275 24 Months
275283 22” x 18” x 3” 1 E2608 350 24 Months
275483 24” x 18” x 3” 1 E2608 350 24 Months
Cover Warranty: 3 Months
Loading...