Hudson Medical Bariatric 3 Comfort Cushion Plus User Manual
Size Selecon of the Pressure EEZ®
Comfort Cushion Plus™ Wheelchair Cushion
Simply select the cushion that would match the width of your hips when
seated. Cushion size should not be determined by the wheelchair seat width.
Improper cushion fit will affect the performance of pressure distribuon of the
cushion and its proper posioning support of the body.
The length of the cushion should be determined by placing the cushion at the
back of the wheelchair while the length extends to the front within 1" to 2" from
the back of the knees. The ischial tuberosies (sing bones) should be centered
in the seat in the center of the back seang area.
The footrest should be adjusted properly in order to enhance seang comfort
and help to lower peak seang pressures. In order to prevent the Comfort
Cushion Plus™ from sliding on the wheelchair upholstery, especially during
transfers, follow these instrucons:
Step 1. Thoroughly clean the surface of the wheel-
chair seat.
Step 2. Peel off the paper backing of the Velcro
strip provided and place 2" from the front, in the
center of the wheelchair seat, as shown.
Step 3. Place the cushion on the wheelchair. The
Velcro strip on the boom of the upholstered
Comfort Cushion Plus™ as well as the non-slip
surface and the Velcro strip placed on the seat will
prevent sliding when changing body posion while
seated.
™
COMFORT
COMFORT
CUSHION PLUS
CUSHION PLUS
3” Wheelchair Cushion
Now with Poly-Lite™ for
Maximum Pressure Relief & Support
To Clean the Cover
Remove the cover from the seat cushion. Machine wash in lukewarm water
and air dry. No ironing is required.
To Clean the Molded Foam Core
To clean the foam core simply spot clean or wipe with moist warm cloth.
Avoid submerging the base in water.
The Comfort Cushion Plus™ Warranty
Hudson Medical guarantees the Comfort Cushion Plus™ to be free from
defects in material and workmanship for a period of 24 months from the date
of purchase under normal use. Should defect occur, the cushion should be
returned by the customer to the place of purchase with original sales receipt.
Hudson Medical will determine if it is a manufacturing defect and replace or
repair the cushion without charge. This warranty does not apply to
punctures, tears and burns to the cushion or removable cover.
MEDICAL PRODUCTS DIVISION
Richmond, Virginia 23231 • 800-343-8112
www.hudsonindustries.com
I2700863/1209
With Progressive Support Technology
(PST) for Custom Comfort
User Instrucon Manual & Warranty
SKIN PROTECTION & POSITIONING – E2607 & E2608
MEDICAL PRODUCTS
HUDSON
COMFORT
COMFORT
™
CUSHION PLUS
CUSHION PLUS
3” Wheelchair Cushion
Designed for Equalization and Positioning to
Maximize Pressure Relief, Support and Comfort
Molded Foam Core with (PST)
Progressive Support Technology
PST produces the right degree of cushion
firmness. Smaller, lightweight clients receive a
soer more compliant cushion, average weight
clients a medium firmness and larger heavier
clients receive a firmer more supporve cushion.
The unique construcon of high resilient (HR)
molded foam provides maximum stabilizaon,
posioning, pressure relief and correct seang
posture.
Poly-Lite™ Pressure Relief Bladders
The inner liner membrane has bladders
filled with Poly-Lite.™ A unique proprietary
super lightweight microspherical polymer that
provides the lowest pressure readings while
seated reducing the likelihood of pressure
sores. Poly-Lite™ weights 25% the weight of
gel, silicone or water and will not freeze, heat
up, evaporate, dry out, harden, separate,
boom-out, support a flame and is non-toxic.
The Comfort Cushion Plus™ Cover
Outer cover is a removable, washable,
flame retardant, stretch polyester knit to
reduce interface pressure and shearing. It is
constructed with a vapor permeable moisture
proof urethane backing and a non-slip boom
for comfort and safety.
PST SIZE RANGES
Firmness Cushion Width
So 10" to 14"
Medium 16" to 18"
Firm 20" to 24"
Use and Applicaon of the Pressure EEZ® Comfort Cushion Plus™
for Posioning, Pressure Relief and Comfort
The Pressure EEZ® Comfort Cushion Plus™ with Poly-Lite™ reduces the
likelihood of pressure sores by reducon of pressure while posioning for
comfort and safety.
Equalizaon of Pressure
The Pressure EEZ® Comfort Cushion Plus™ is manufactured with a flexible
urethane membrane casing with bladders of new Poly-Lite™; a unique super
lightweight microspherical polymer gel (weighs 1/4 the weight of silicone or any
other aqueous based gel) that has been radio frequency sealed for strength and
to prevent leakage. The Poly-Lite™ bladders are strategically placed in the
coccyx, ischial tuberosity and thigh area to reduce pressure and allow capillary
blood flow.
Posioning for Comfort and Safety
The Pressure EEZ® Comfort Cushion Plus™ is uniquely designed using a high
resilient (HR), custom molded foam core that posions the body in the correct
seang posture, provides a leg abducon post to prevent leg rotaon and
abrasion. The Pressure Eez® Comfort Cushion Plus™ is strategically contoured to
provide opmum seang posture. The Pressure Eez® Comfort Cusion Plus™ with
Poly-Lite™ remains cool and combined with the breathable moisture barrier
cover, the body remains cool, dry and comfortable.
Flexible Moisture
Proof Bladder
Radio Frequency Sealed
to Prevent Leakage
Leg Abduction Post
Prevents Hip Rotation
and Abrasion
High Density Molded Urethane Foam
for Positioning, Support and Comfort
Poly-Lite™ for Pressure Relief
Air Vents
on Each Side
to Evacuate
Contained Air
in the Molded
Foam Base
The Comfort Cushion Plus™ Wheelchair Cushion
is Available in the Following Sizes:
Units/ Medicare Weight
Item No. Size Case Code Capacity Warranty
270663 16” x 16” x 3” 1 E2607 275 24 Months
270683 16” x 18” x 3” 1 E2607 275 24 Months
270603 16” x 20” x 3” 1 E2607 275 24 Months
270863 18” x 16” x 3” 1 E2607 275 24 Months
270883 18” x 18” x 3” 1 E2607 275 24 Months
270803 18” x 20” x 3” 1 E2607 275 24 Months
270063 20” x 16” x 3” 1 E2607 275 24 Months
270083 20” x 18” x 3” 1 E2607 275 24 Months
270003 20” x 20” x 3” 1 E2607 275 24 Months
270283 22” x 18” x 3” 1 E2608 350 24 Months
270483 24” x 18” x 3” 1 E2608 350 24 Months
Cover Warranty: 3 Months
Loading...