Hubsan H002, NANO Q4 CAM PLUS Instruction Manual
NANO Q4 CAM PLUS
NO. H002
Content
Introduction------------------------------------------------
Safety Notes-------------------------------------------------
Safety check before flying---------------------------------
Charge the Li-Po battery--------------------------------------
Remote Controller------------------------------------------
Camera------------------------------------------------------
Start to Fly--------------------------------------------------
Advanced Performance Setup------------------------------------
Propellers---------------------------------------------------
Exploded View----------------------------------------------
Troubleshooting--------------------------------------------
Spare Part List-----------------------------------------------
1
1
3
3
5
6
7
9
11
12
13
1
Introduction
2 Safety Notes
Thank you for buying the HUBSAN products. It is designed as an easy-to-use,
multi-functional RC model, capable of hovering, fast forward and acrobatic flight
maneuvers. Please read the manual carefully and follow all the instructions. Be
sure to keep the manual for future reference.
1
2.1
Important Notes
This multi-functional RC model is not a toy.
In case of any injuries caused by improper operations, please read the instructions
carefully before use. Be aware of your personal safety, safety of others and your
surrounding environment. It is advised that beginners learn to fly the qudcopter
under the guidance of professional
2.2
Caution
Propellers work in high speed, which may cause dangerous. User will be
responsible for any damages caused by improper operations.
Do not operate the quadcopter in crowds, buildings, airports or nearby high
voltage cables.
2.3
Li-Po Battery Safety Notes
The quadcopter is powered by a Lithium-Polymer battery.
If you do not plan to use the products for a long time, store the battery
approximately 50% charged to maintain battery performance and life.
Important
● Risk of explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the local regulations.
2
2.4
Prevent Moisture
The quadcopter contains many precision electrical componets.
Store the battery and the quadcopter in a dry area at room temperature.
Exposure to water or moisture may cause malfunction resulting in loss of control.
2.5
Proper Operation
For safety, pnly use Hubsan spare parts for replacement.
2.6
Always Be Aware of the Rotating Propellers
Be careful to keep your body away from the working propellers. Always keep the
quadcopter fly in sight. If above mentioned happens, pwer off the quadcopter
and the remote controller immediately.
2.7
Avoid Flying Alone
Beginners should avoid flying alone when learning flight skills.
3 Safety Check Before Flying
4 Charge the Li-Po Battery
3
4.1
3.7v180mAh Li-Po Battery
Connect the battery to the Hubsan USB charger, then connect the USB charger
to USB devices, such as a computer or mobile power charger.It takes around
30 minutes to fully charge the battery. The USB LED indicator is in red when
charging and light off when the battery is fully charged. Please unplug
thecharger and battery when the charging is completed.Flight time is around 6
minutes.
●
●
y
4.2
Power-on/off
Long press the power button to turn on/off the quad.
（As shown in the picture）
5 Remote Controller
(1)
1
4
4
3
3
6
5
5
Mode 1
6
Mode 2
(2)
2
Loading...