Huber Unichiller 010 OLÉ Data Sheet

Unichiller 010 OLÉ

Chiller with air-cooled refrigerating unit and circulation pump. Evaporator (cooler), tank and housing of stainless steel. Pump
made of industrial plastic material. Temperature adjustment and temperature display digital. Level indicator with sight glass

NEW: OLÉ controller:

OLÉ combines state-of-the-art technology with simple operation. Models with OLÉ controller are suitable for routine tasks in
research and industry and are convincing as practice oriented basic equipment:

* Large, bright OLED display
* Simple operation with menu navigation
* Simultaneous display of set point, internal temperature, Tmin and Tmax
* USB (Device) and RS232 interfaces
* Autostart function for power failure

Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory
fitted, additional charge)

3-2-2 warranty - registration required.

Technical data according to DIN 12876

Operating temperature range -20...40 °C
temperature set point / display digital
Internal temperature sensor Pt100
Resolution of display 0,1 K
Temperature stability at -10°C 0,5 K
Alarm message optic, acoustic
Safety classification Class I / NFL
Cooling power
at 15°C 1 kW
at 0°C 0,8 kW
at -10°C 0,5 kW
at -20°C 0,15 kW
Refrigeration machine air-cooled, CFC- and

HCFC-free
Refrigerant R507
Refrigerant quantity 0,3 kg
Circulation pump Immersion pump
at 0,5 bar 21 l/min
max. delivery 29 l/min
max. delivery pressure 1,0 bar
Pump connection G3/4 male
min. filling capacity 3,8 l
expansion tank 1,7 l
Overall dimensions WxDxH ** 350x496x622 mm
Net weight 49 kg
Power supply requirement 230V 1~ 50/60Hz
max. current 6 A
min. Fuse (1 phase) 10A
max. Fuse (1 phase) 16A
Degree of Protection IP20
min. ambient temperature 5 °C
max. ambient temperature 40 °C

3012.0124.98Order-No.:

.

from Serial-No.: 258716 1.0/17

Technical details and dimensions are subject to change. No liability is accepted for errors or omissions. Illustrations can deviate from the original.

Included Accessories:

cover expansion vessel #25178, hose coupling for G3/4 male,

Optional accessories:

drain valve #6839, temperature control / - connection hoses, thermofluids, further accessories, etc.: see catalog.

Peter Huber Kältemaschinenbau AG Werner-von-Siemens-Str. 1 D-77656 Offenburg Tel [phone] Fax [phone] www.huber-online.com

Technical data according to DIN 12876

Output data valid for: Room temperature 20°C

in accordance with EN60034-1 the following voltage and frequency tolerances are valid:
Voltage + / - 5% with a simultaneous frequency tolerance of + / - 2%
Example -5% voltage and +2% frequency -> not allowed!

Information to Electromagnetic compatibility:
Classification (disturbance) to EN55011: Class A, Group 1

Special Case: Acetone and Polyglycol: The plastic pump is not resistant against acetone and polyglycols (depending on the manufacturer).
It is recommended that water is mixed with either glysantine or ethylene glycol for freeze protection. A more resistant plastic is available
on request at an additional cost.

Standard delivery conditions - Power cable configuration:

1. Single-phase devices (230V/115V) -> with cable and plug

2. Three-phase devices with current consumption less than 63A -> with cable, without plug

3. Three-phase devices with current consumption greater than 63A -> without cable, without plug

-5% voltage and - 2% frequency -> allowed

** Please respect space requirements. See operating conditions at

www.huber-online.com

Peter Huber Kältemaschinenbau AG Werner-von-Siemens-Str. 1 D-77656 Offenburg Tel [phone] Fax [phone] www.huber-online.com