• Entire optical aperture illuminates to create
a larger luminous surface area resulting in
a low glare appearance without sacrificing
optical performance
• 80, 160, 320 or 480 midpower LEDs
• 3000K, 4000K or 5000K (70 CRI) CCT
• Zero uplight at 0 degrees of tilt
• Field rotatable optics
INSTALLATION
• Standard square arm mount, compatible with
B3 drill pattern
• Optional universal mounting block for ease
of installation during retrofit applications.
Available as an option or accessory for
square and round poles.
• Knuckle arm fitter option available for 2-3/8”
OD tenon. Max tilt of 60 degrees with 4
degree adjustable increments. (Restrictions
apply for 7-pin options)
• Drivers have greater than 90% power factor
and less than 20% THD
• LED drivers have output power over-voltage,
over-current protection and short circuit
protection with auto recovery
• Field replaceable surge protection device
provides 20kA protection meeting ANSI/
IEEE C62.41.2 Category C High and Surge
Location Category C3; Automatically takes
fixture o-line for protection when device
is compromised
CONTROLS
• Photo control, occupancy sensor and
wireless available for complete
on/o and dimming control
• 7-pin ANSI C136.41-2013 photocontrol
receptacle option available for twist lock
photocontrols or wireless control modules
(control accessories sold separately)
• 0-10V dimming leads available for use with
control devices (provided by others, must
specify lead length)
• SiteSync™ wireless control system is available
via 7-pin See ordering information and details
at: www.hubbelllighting.com/sitesync
• NX Distributed Intelligence™ available with
in fixture wireless control module, features
dimming and occupancy sensor
PHOTOMETRY RATIO BROCHURE RAR1/RAR2 PSG PAGE INSTALLATION INSTRUCTIONS
RELATED PRODUCTS
Airo Cimarron LED Ratio Family
CONTROLS CONT'D
• wiSCAPE® available with in fixture wireless
control module, features dimming and
occupancy sensor via 7-pin
CERTIFICATIONS
• DLC® (DesignLights Consortium Qualified,
with some Premium Qualified configurations.
Please refer to the DLC website for specific
product qualifications at www.designlights.org
• Listed to UL1598 and CSA C22.2#250.0- 24
for wet locations and 40˚C ambient
temperatures
• 3G rated for ANSI C136.31 high
vibration applications
• Fixture is IP66 rated
• Meets IDA recommendations using 3K CCT
configuration at 0 degrees of tilt
WARRANTY
• 5 year limited warranty
• See HLI Standard Warranty for
additional information
Notes:
1Replace "_" with "3" for 3.5"-4.13" OD pole, "4" for 4.18"-5.25" OD pole, "5" for 5.5"-6.5" OD pole
2Replace "_" with "14" for up to 14' mounting height, "30F" for 15-30' mounting height
3Not available with 80 LED versions
4At least one SCPREMOTE required to program SCP motion sensor