Hubbell Lighting LIGHTNING ROD GROUND CONN, LPRTQ7-7 User Manual

LIGHTNING ROD OPTION GROUND

CONNECTIONS AT BOTTOM OF POLE

THIS LIGHTNING ROD SYSTEM INSTALLATION

MUST MEET NFPA 780 CODE REQUIREMENTS

STEEL POLE

POLE HANDHOLE FRAME

SECURE POLE CONNECTORS

TO EMBEDDED INSERT

SECURE POLE CONNECTORS

(SHIPPED W/CROSSARM)

TO POLE HANDHOLE FRAME

10'-6" COPPER CABLES

(SHIPPED W/CROSSARM)

CONCRETE POLE

SECURE CABLES TO POLE

CONNECTORS & GRD RODS

GROUND LINE

COPPER CABLE FROM POLE

GROUND ROD CONNECTOR

(SHIPPED W/CROSSARM)

5/8” DIA GROUND ROD

(FURNISHED BY CONTRACTOR)

8" RAD

(MIN)

90°

(MIN)

10' (MIN)

(20' IN SANDY SOILS)

GROUND ROD NOTES:

• TWO REQUIRED PER POLE

• PLACEMENT SHOULD BE 180° AP AR T

• RODS TO BE PLACED 2’ (MIN) AWAY
FROM POLE BASE

ROD MOUNTING

BRACKET

LIGHTNING ROD OPTION

INSTALLATION INSTRUCTIONS

SECURE LIGHTNING ROD(S) TO

MTG BRACKET(S) ON CROSSARM

LIGHTNING ROD (SHIPPED W/CROSSARM)

30” FOR 3, 4, 5 & 6 FIXTURE

SINGLE ROW CONCRETE CROSSARM

COPPER

CABLE

BONDING BRACKET (STL)

OR CABLE STRAP (CONC)

24” FOR ALL OTHERS

CROSSARM

ASSEMBLY

THE COPPER CABLE / BONDING BRACKET MAY BE

SHIPPED FROM THE FACTORY DISCONNECTED FROM

THE VERTICAL MEMBER OF THE CROSSARM ASSEMBLY.

ENSURE THA T THEY ARE SECURED TO THE CROSSARM

ASSEMBLY DURING FIELD INSTALLATION.

2 FIXTURE CROSSARM

CONCRETE POLE

4 & 6 FIXTURE

CROSSARMS

ROD MOUNTING BRACKET

BONDING BRACKET

COPPER CABLE

(SHIPPED W/CROSSARM)

SECURE POLE CONNECTOR

(SHIPPED W/CROSSARM)

TO POLE

SECURE CABLE TO BONDING BRACKET

ON CROSSARM & TO POLE CONNECTOR

SECURE TEE CONNECTOR

(SHIPPED W/CROSSARM)

TO CROSSARM CABLE

SECURE CABLE TO

TEE & POLE CONNECTOR

268-1162-9901

REV. A