Hubbell X-END and One Punch Tool Catalog Page
X-END and One Punch Tool
Installation efciency at the work area is critical in today’s facilities that can contain several
thousands of connections to support data, voice and AV applications. Hubbell's Plug-n-Play
X-End AV Solution uses pre-terminated assemblies and a locking connections that save
valuable installation and testing time. The patch cords and tails are easily swapped out as
requirements in horizontal cabling runs. For quick, efcient punching down all four pairs of
a voice/data jack, the Hubbell 1-Punch Tool saves valuable installation time over traditional
single-blade tools.
X-END Plug-n-Play
• Overmolded connections with locking
• Designed for minimal signal loss for
• Support multiple applications and
• Plug-n-play design saves installation and
HDMI 110 UTP Extender
• Utilizes UTP cabling (Cable is already on site)
• Customize lengths on site (No pre-ordering
• Integrates into all Hubbell workstation and
One Punch Tool
• Reduces termination time by 75%
• Consistent, reliable termination every time
• Punches all 4 pairs and cuts off excess wire
Ordering Information
interface ensure mated connection
superior audio and video
connector congurations
testing time
cable assemblies)
delivery products
in one punch
X-END Plug-n-Play
HDMI 110 UTP
Extender
One Punch Tool
Hubbell iSTATION HDMI 110 UTP Extenders
Description DC Installation Decorator Module
110 UTP HDMI
extender (pair)
xx = Color: BK (Black), EI (Electric Ivory), GY (Gray), OW (Ofce White), and
W (White).
AV Plug-n-Play X-END Horizontal Cable Runs, Male, Black
Description Catalog Number
Non-Plenum, 8-pin
Plenum, 8-pin
Non-Plenum, 8-pin, with 3.5mm
Plenum, 8-pin, with 3.5mm
yy = Length: 15 (15 ft), 25 (25 ft), 35 (35 ft), 50 (50 ft), 75 (75 ft), and 100 (100 ft).
Contact Hubbell customer service for custom legths, minimum quantities and
lead times may apply.
VGA Plug-n-Play
X-END Connections
Quantity
1-Pack
10-Pack
5 Volt 2 4-pair IS F H110 x x IMH1102xx
VGA6y yBK
VGA6P yyBK
VGA36yyBK
VGA36Py yBK
15-Pin (F) to 8-Pin (F)
Straight 180º Angled 45° Angled 90° 8" Tail Non-Plenum Plenum
15S6P1
15S6P10
15A6P1
15A6P10
15N6P1
15N6P10
15T6 P1
15T6 P10
15-Pin (M) to 8-Pin (M)
8" Tail
15M6P1
15M6P10
15MP6P1
15MP6P10
1-Punch Tool for XCELERATOR Jacks
Description Catalog Number
1-punch Ascent HJ tool with head,
blades and HXTA termination aid
1-punch XJ tool with head, blades and
HXTA termination aid
Hand termination aid "Jack Knuckles"
Xcelerator/Ascent
Snap-X termination puck (bag of 25) HXTP25
Ascent termination puck (bag of 25) HJTP6A25
1-Punch Tool for P6E and P6A Series
Patch Panels
Description Catalog Number
Patch Panel tool with head and blades TX4PP
Replacement heads and blades are available. Hubbell Xcelerator jacks are
compatible with Paladin Tools® "Jack Terminator" PA8111 termination tool.
TX4P
TX4PP HXTP25
TX4P6A
TX4P
HX TA
HX TA
Loading...