Hubbell Wall Mount Sensors Catalog Page

H-MOSS® Controls

Wall Mount Sensors

Line Voltage and Low Voltage

Adaptive Technology Wall Mount Sensors

• Adaptive technology - “Install and forget” operation

• Swivel mounting bracket included for wall or ceiling mounting

• All digital sensing technology

ATD16 0 0 W

Series

ATP16 0 0 W,

ATP12 0 HB

Series

Dual (Ultrasonic and Passive Infrared)

Description Coverage Color Catalog Number

Low voltage sensor 32kHz with photocell and isolated relay Low voltage sensor 32kHz

Passive Infrared

Description Coverage Color Catalog Number

Low voltage sensor with photocell and isolated relay 1600 sq. ft.

Low voltage sensor for aisle and high bay applications, with photocell and isolated relay

Low voltage sensor for aisle and high bay applications 120 linear ft. White ATP12 0 HB

Note: All wall mount sensors must use a CU series control units. See below for details.

• Photocell for daylight harvesting and relay interface with auxiliary systems such as HVAC (RP models)

• 24V DC, 33mA

• cULus

1600 sq. ft. 1600 sq. ft.

1600 sq. ft. 120 linear ft. White ATP12 0 HBRP

See pages E-19 and E-20 for coverage pat terns and technical specifications.

White White

ATD1600WRP ATD16 0 0 W

ATP1600WRP ATP16 0 0 W

E-8

CU300A(M),

CU347A

CU300HD

AAR

DSL30W1

Accessories

Control Units

The CU300 series provides 24V DC power supply for sensors or sensor/Add-A-Relay combinations The control units contain an internal relay for the control of an external lighting load. Control units are plenum rated cULus Listed.

Description Catalog Number

Automatic-on operation, 120/277V AC, 50/60Hz for use with 1 to 4 ATD, ATU and ATP series ceiling/wall mount sensors

Manual-on operation, 120/277V AC, 50/60Hz for use with 1 to 4 ATD, ATU and ATP series ceiling/wall mount sensors

Auto or manual-on operation, 120/277V AC, 50/60Hz for use with 1 to 6 ATD, ATU and ATP series ceiling/wall mount sensors, heavy duty latching relay for reactive loads and plug-load control

Automatic-on operation, 347V AC, 60Hz, for use with 1 to 3 ATD, ATU and ATP series ceiling and wall mount sensors

Note: See page E-25 for technical specifications.

Add-A-Relay

Hubbell AAR Add-A-Relay contains an internal relay for control of an external lighting load. The AAR

requires a 24V DC power supply from the Hubbell CU series control unit. The AAR is typically used

when: 1. It is desired to switch more than one circuit when occupancy is sensed. 2. The lighting load exceeds the maximum rating of the control unit.

Description Catalog Number

For use with CU series control units and Hubbell ATD, ATU and ATP series ceiling and wall mount sensors

Low Voltage Switches

• Attractive, architectural design

• Available latching or momentary contact

Description Color Catalog Number

Low voltage switch, latching, 1 button Ivory

Low voltage switch, momentary, 1 button Ivory

Low voltage switch, momentary, 2 button Ivory

Note: Wallplate sold separatel y.

Wiring Device-Kellems

• Mounts to standard single gang box

• 2-year warranty

White

CU300A

CU300M

CU300HD

CU347A

AAR

DSL30 I1 DSL30W1

DSM30I1 DSM30W1

DSM30I2 DSM30W2