Hubbell HBLS460C9W Specifications

Switch-Rated IEC Pin and Sleeve

60/63A 3 Phase 250V, 3 Pole, 4 Wire

Watertight Connector Body

Features

Mates with existing installed base of IEC 60309-2 pin and sleeve devices

Approved as a disconnecting means for motor circuits and branch circuits

UL Type 4X, 12 and IP69k environmental ratings

Impact and corrosion-resistant PBT that is color coded by voltage.

Unswitched ground and power indicating LED lights

Ordering Information

Description UPC Catalog Number

Watertight IEC Pin and Sleeve
Connector Body

Listings

UL Listed, File E146033
CSA Certified File LR280C
UL Classified to IEC 60309-1 IEC 60309-2

783585478609 HBLS460C9W

Specifications

Housing PBT
Cord Clamps PBT
Glands Solid Neoprene
Covers PBT
Gaskets Santoprene

Performance

Electrical

Current Interrupting

Dielectric Voltage
Max. Working Voltage

Mechanical

Impact Resistance
Product Identification

Terminal Identification

Environmental

Flammability
Ingress Protection
Moisture Resistance
Operating Temperatures

Certified for current interrupting at full rated
current

Withstand 3000V AC
600V RMS

Per CSA C22.2 No. 182.1 / UL1682
Identification and ratings are a permanent part of

the device housing
Terminals identified in accordance with North

American and IEC conventions

V-0
TYPE 3R,3RX,4X AND IP68,IP69K

IEC 60309-1

Maximum Continuous 75°C; Minimum - 40°C
w/o impact

Dimensions in Inches (mm)

Specifications subject to change without notice.