Hubbell HBL5262 Technical Data

Straight Blade Devices

Technical Information

HBL® Extra Heavy Duty, Straight Blade
Specification Grade Duplex Receptacles

Specifications

Receptacles Part Description

Typical Specification – Catalog No. HBL5262 Receptacle 15A
Manufacturer’s Identification – Hubbell HBL5262 Top Nylon
Description – Heav y Duty Straight Blade Duplex Receptacle Base RTP*
Type – 2 Pole, 3 Wire, Grounding By-Pass Power Contacts .037 in. (.9) Brass
Rating – 15A, 125V Wire Clamps .031 in. (.8) Brass
Certification: UL Listed to UL498 File E2186, Guide RTRT Mounting Strap .050 in. (1.3) Brass
Fed. Spec. WC596, Meets NEMA
Certified to CSA, C22.2, No. 42 File 285 Ground Screw #10-32 Brass, Multiple Drive (Green)
Center Assembly Rivet Brass
Automatic Self-Grounding Clip Stainless Steel
Flat Head Mounting Screws Steel-Zinc Plated
Ground Tension Clips Steel-Nickel Finish

®

WD-6 Compliant Line Terminal Screws #10-32 Brass, Multiple Drive

HBL5262

Performance

Electrical

Dielectric Voltage Withstands 2,000V minimum.
Max. Working Voltage 125V or 250V as rated.
Current Interrupting Certified for current interrupting at full rated current.
Temperature Rise Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.

Mechanical

Terminal Identification Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
Terminal Accommodation #14-10 AWG stranded or solid copper conductor only.
Product Identification Ratings are a permanent part of the device.

Environmental – Material

Flammability Top: UL 94V-2.
Base: UL 94V-0 and UL 94-5 VA.
Operating Temperature Maximum continuous 75°C; minimum -40°C (w/o impact).

Note: *Reinforced Thermoplastic Polyester.

NEMA® is a registere d trademark of the National Electrical Manufacturers Association.

®

Wiring Device-Kellems

A-51