Hubbell HBL26CM20 Specifications

Twist-Lock® Devices

30A, 250V AC, 2 Pole, 3 Wire Grounding

Corrosion Resistant Single Flush
Receptacle

Features

Wire restraint recess for both back and side wiring, greatly reduces
the possibility of loosening the terminal connection

Face color coding by voltage facilitates locating and mating of
proper devices

Nickel plated brass mounting and grounding system provides a
lower resistance ground path and greater resistance to corrosion
than steel mounting systems

Ordering Information

Description Device Color UPC Catalog Number
Corrosion resistant,
nylon face.

Listings

Listed to UL 498
Fed.Spec. W-C-596
Certified to CSA C22.2 No.42

Yellow 783585358505 HBL26CM20

Specifications

Face Nylon
Base Glass-Reinforced thermoplastic polyester (RTP)
Contacts Nickel Plated Brass
Terminal Screws #10 - 32 Bronze
Mounting Strap Nickel Plated Brass

Performance

Electrical

Current Interrupting Certified for current interrupting at full rated current
Dielectric Voltage Withstands 2,000V minimum

Mechanical

Terminal Accommodation #16 AWG - #8 AWG stranded copper wire only.

Terminal Identification Terminals identified in accordance with UL 498

Environmental

Flammability V2 or better per UL94/CSA 22.2 No.0.17
Moisture Resistance IP20 Suitability
Operating Temperatures Maximum Continuous 75°C; Minimum -40°C (w/o impact)

Accessories

Plug HBL26CM21
Wallplate or Weatherproof Cover 1.60" Opening

Resources

Customer Use Drawing
eCatalog

Dimensions in Inches (mm)

Specifications subject to change without notice.