Hubbell DT5030I Specifications

H-MOSS® Controls

Count Down Timer Wall Switch

Timers

Features

30 minute timer
Pre-set 5 button selection with permanent time markings
Manual override to OFF
Alert to OFF function - red LED will flash during the final 30

seconds
Designed for use on 120 or 277V AC circuits

Ordering Information

Description UPC Number Catalog Number
Count down timer wall
switch; settings: OFF,
5, 10, 20, 30 minutes

Listings

cULus listed to UL60730-1 and UL60730-2
Meets ASHRAE 90.1, and CEC Title 24 compliant

783585256405 DT5030I

Specifications

Housing Polycarbonate
Mounting Bracket Aluminum
Wire Leads 6" 14AWG copper wire
Mounting Strap Steel

Performance

Controls

5 button selection Preset time selection
LED Indicators Illuminates once time is selected
OFF Switch Manual override to OFF

Electrical

Load Capacity 120V AC - 8.3A, Resistive or Inductive (1000W

Incandescent), 1/6 hp. 277V AC - 5.1A, Inductive (1400W
Fluorescent)

Environmental

Operating Temperature 32°F to 122°F (0°C to 50°C) with rate of change not

exceeding 20°F(11°C) per hour

Storage -40°F to 150°F (-40°C to 65°C); 20% to 90% non

condensing relative humidity

Complementary Products

Nylon Wallplate NP26I
SS Wallplate SS26
Snap-On Wallplate RCW1I

Online Resources

Customer Use Drawing
eCatalog
Installation Instructions

Dimensions in Inches (mm)

Specifications subject to change without notice.