Hubbell CRF15I, BR15LA, DR20I, CR20TR, DR20GRYWR Technical Data

Straight Blade Devices

Technical Information

Commercial Specification Grade Receptacles

Specications

Part Standard Weather Resistant

Top Base

Double Wipe Power Contacts Wire Clamp

Finish

Mounting Strap

Ground Contact

Line Terminal Screws Ground Screw

Automatic Self-Grounding Staple

Mounting Screws

Certification

UL Listed

Fed. Spec. Certified to CSA

CRF15I BR15LA DR20I CR20TR

Nylon Nylon

.030 in. (.8) Brass .062 in. (1.6) Steel-Nickel Plated

.040 in. (1) Steel (Galvanized) .031 in. (.8) Brass #8-32 Plated Steel, Multiple Drive #8-32 Plated Steel, Multiple Drive

Stainless Steel

Zinc Plated Steel

UL498 WC596* C22.2, No. 42

Nylon (UV Rated)

Nylon

.030 in. (.8) Brass .062 in. (1.6) Steel-Nickel Plated

.040 in. (1) Steel (Galvanized) .031 in. (.8) Brass #8-32 Stainless Steel, Multiple Drive #8-32 Stainless Steel, Multiple Drive

Stainless Steel Stainless Steel

UL498 WC596* C22.2, No. 42

DR20GRYWR

Performance

Electrical

Dielectric Voltage Max. Working Voltage Current Interrupting

Temperature Rise

Mechanical

Terminal Identification

Terminal Accommodation

Product Identification

Environmental – Material

Flammability

Operating Temperature

Note: *Decorator and Commercial Tamper-Resistant devices are not Fe d. Spec. Listed.

Withstands 2,000V minimum. 125 V. Certified for current interrupting at full rated current. Max 30°C temperature rise at full rated

current after 100 cycles of overload at

150% of rated current.

Terminals identified in accordance with

UL 498 and CSA (Brass, White, Green). #14-10 AWG stranded or solid copper conductor only. Ratings are a permanent part of the device.

UL 94V-2. Maximum continuous 75°C; minimum -40°C (w/o impact).