Switched Enclosures
Circuit-Lock® Unfused Disconnect Switches
“Suitable as Motor Disconnect”
30, 60 and 100 Amp Unfused Disconnect Switches
Description Catalog Number
30A Circuit-Lock disconnect switch. HBLDS3
30A Circuit-Lock disconnect switch for use with variable frequency drives. HBLDS3VFD
30A Circuit-Lock disconnect switch with HBLAC1 aux. contact. HBLDS3AC
30A Circuit-Lock disconnect switch with HBLAC2 aux. contact. HBLDS3AC2
30A Circuit-Lock disconnect switch without conduit knockout or conduit fitting. HBLDS3NK
30A Circuit-Lock disconnect switch with HBLAC1 aux. contact HBLDS3ACNK
without conduit knockout or conduit fitting.
30A Circuit-Lock disconnect switch with 3 aux. contacts, w/o conduit knockouts. HBLDS33ACNK
Break before main break – 1 set “normally open”, 1 set “normally closed”.
Break after main break – 2 sets “normally open”, 1 set “normally closed”.
60A Circuit-Lock disconnect switch. HBLDS6
60A Circuit-Lock disconnect switch with HBLAC1 aux. contact. HBLDS6AC
100A Circuit-Lock disconnect switch. HBLDS10
100A Circuit-Lock disconnect switch with HBLAC1 aux. contact. HBLDS10AC
∆
IP66
SUITABILITY
UL Listed, CSA Certied
TYPE 4, 4X and
12 Enclosure Rating
HBLDS3AC
Switched Enclosures Circuit-Lock
Auxiliary Contacts for 30, 60 and 100 Amp Switch, A600 Pilot Duty
Description Catalog Number
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts. HBLAC1*
“Break Before Main Break”, 1 set of n/o contacts. HBLAC2*
Ground Block
Description Catalog Number
For 30A switches. HBL30RGB
For 60A and 100A switches. HBL60100RGB
Neutral Block
Description Catalog Number
For 30A switches. HBL30RNB
For 60A switches. HBL60RNB
For 100A switches. HBL100RNB
*
Note:
Not for use with HBLDS33ACNK.
30A Units are supplie d with one ¾ in. N.P.T. Raintight conduit f itting.
60A and 100A Units are supplied with two 1¼ in. N.P.T. Raintight conduit fitti ngs.
∆
See page C-34 for wiring details.
HBLAC1
HBLAC2
HBL30RGB
HBL30RNB
®
Unfused Disconnect Switches
Dimensions in Inches (mm)
C-33