Hubbell Bus Drop Support Grips Catalog Page

Kellems® Wire Management Products
Safety Spring
Bus Drop Support Grips
Single Eye, Universal Eye, Galvanized Steel
Safety Spring
Maximum Deflection Inches/Lbs (cm/N)
2¾" at 40 lbs. (6.98 at 178)
3¹⁄₈" at 80 lbs. (7.94 at 356)
Note: Springs can be used with single eye grips by disassembling drawbar from coi l, placing through eye and replacing drawbar.
*No load.
Single Eye, Wide Range
Cable Diameter Range Inches (cm)
.24"-.32" (.61-.81) 350 (1,557) 3" ( 7.62) 3.5" (8.89)
.32"-.43" (.81-1.09) 450 (2,002) 4" (10.1 6) 4" (10 .16 )
.43"-.5 6" (1. 09-1.42) 550 (2,446) 6" (15.24) 4.75" (12.06)
.56"-.73" (1.42-1.8 5) 1,000 (4,448) 7" (17.7 8 ) 6" (15.24)
.73"-.85" (1.85-2.16) 1,400 (6,227) 7 " (17.78) 6.75" (17.14)
.85"-1.00" (2.16-2.54) 1,400 (6,227) 8" (20.32) 8" (20.32)
1.0 0"-1.25" (2.54 -3.17) 1,500 (6,672) 9" (22.86) 9.5" (24.13)
Approx. Breaking Strength Lbs. (N)
500 (2, 224) 8.25" (20.95) .75" (1.90) 40 lb. spring
850 (3,781) 8.25" (20.95) 1" (2.54) 80 lb. spring
Approx. Breaking Strength Lbs. (N)
Diameter Inches (cm)
E Inches (cm)
IMPORTANT
Read all breaking strength, safety and technical data relating to this product. Pages V-41 to V-45.
Model Lbs. (N) Catalog Number
20302001
(178)
20302002
(356)
M Inches (cm) Catalog Number
073041276** 073041277 073041278 073041279 073041280 073041281 073041282
Strain Relief Grip
Motor Box
Bus Drop Grips
Universal Eye, Wide Range
Cable Diameter Range Inches (cm)
.32"-.43" (.81-1.09) 450 (2,002) 10" (25.40) 4" (10.16 )
.43"-.5 6" (1. 09-1.42) 550 (2,446) 12" (30.48) 4.75" (12.06)
.56"-.73" (1.42-1.8 5) 1,000 (4,448) 13" (33.02) 6" (15.24)
.73"-.85" (1.85-2.16) 1,400 (6,227) 13" (33.02) 6.75" (17.14)
.85"-1.00" (2.16-2.54) 1,400 (6,227) 14" (35.5 6) 8" (20.32)
1.0 0"-1.25" (2.54 -3.17) 1,500 (6,672) 15" (38.10 ) 9.5" (24.13)
Note: E-Eye length. M- Mesh le ngth at nominal diameter.
**Item i ndicated is not UL listed.
Approx. Breaking Strength Lbs. (N)
E Inches (cm)
M Inches (cm) Catalog Number
Bus Drop Grips and Safety Springs
Kellems Bus Drop Grips are offered with either a single eye or universal bale attachment. The mesh is single weave galvanized steel with the patented wide range construction. They are suitable for indoor use only. Consult Technical Service for Stainless Steel Grips.
Application
Bus Drop Grips provide a safe, easy and economical method to support flexible cord or bus drop cable at bus duct and other industrial areas.
Benefits
Strain Relief Grip
• Easily installed.
• Absorb tension, vibration and pull with no cable damage.
• Patented mesh construction.
Safety Spring
Springs can be used with single eye grips by disassembling drawbar from coil, placing through eye and replacing drawbar.
073041284 073041285 073041286 073041287 073041288 073041289
V-36
®
Wiring Device-Kellems
Loading...