Hubbell ADD2000W1 Data Sheet

H-MOSS Controls

Adaptive Dual Technology

Wall Switch Sensor

Features

Dual technology sensing combines the individual advantages of
passive infrared and ultrasonic detection
Built in photocell with manual super saver mode for daylight
harvesting
Impact resistant hard lens is standard and color matched to the switch
0-10V Dimming with compatible IEC 60929 standard compliant
ballasts/LED drivers

Ordering Information

Description

DualTech Wall Switch
Sensor with Dimming

Listings

cULus Listed
ASHRAE 90.1
CEC Title 24 Certified

Color

White

UPC Number

783585427867

Catalog Number

ADD2000W1

Specifications

Housing
Lens

Mounting Height
Sensing

Dimming 0-10V, Sink up to 30mA

High-impact injection-molded plastic (UL-94-5V)
Impact-resistant lens
42 to 54 Inches Above Floor
Passive Infrared and Ultrasonic

Performance

Controls

Front Press Switch

Ambient Light

Timer Time Outs

Electrical

Ratings

Environmental

Operating Temperature

On/Raise Button & Off/Lower Button

Optional Photocell, Adjustable Light Override,
10 to 500 foot candles

Auto mode: 4-20 minutes; self-adjusts based on
occupancy; fixed mode: 4, 8, 15, and 20 minutes; Test
mode: 5 seconds

120V AC: 800W Electronic ballast/LED driver 1,000W
Magnetic ballast 277V AC: 1,200W Magnetic ballast/
Electronic ballast/LED driver

Indoor use only, operating temperature: 32° to 104°F (0°
to 40°C), relative humidity (non-condensing): 0% to 95%

Dimensions in Inches (mm)

Specifications subject to change without notice.