Hubbell AC Switches Catalog Page
Metal Raceway
HBL2000 and HBL2000A Series
Fittings and Tools
Description Color Catalog Number Description Color Catalog Number
Transition Fitting
For transitioning from
Wiremold® 2000 Raceway to Hubbell
HBL2000 Raceway.
Ivory
Gray
HBL2000TFIV
HBL2000TFGY
A: .82" (20.71)
B: 1.38" (35.12)
C: 2.04" (51.82)
Entrance End Fitting
For connecting HBL2000 Raceway
with one ½ in. conduit and armored
cable connectors.
Ivory
Gray
HBL2010A2IV
HBL2010A2GY
A: 3.01" (76.45)
B: 1.30" (33.02)
C: 1.49" (37.85)
Blank End Fitting
For closing open end of HBL2000
Raceway.
End Fittings
End Reducing Connector
For connecting HBL2000 Raceway
to HBL500 Raceway through end
of HBL2000 Raceway.
Cover Clip
Use to cover potential openings where
two pieces of HBL2000 Raceway cover
come together.
Wire Clip
For holding conductors in place in the
raceway base. For use when using
the HBL2000CIV/GY cover only.
Ivory
Gray
Ivory HBL2089EIV
Ivory
Gray
Steel** HBL2000WC
HBL2010BIV
HBL2010BGY
A: .78" (19.94)
A: .78" (19.81)
HBL2006IV
HBL2006GY
A: .75" (19.05)
A: .44" (11.18)
B: .24" (6.03)
C: 1.24" (31.50)
Large Capacity Entrance End Fitting
Offers larger capacity than HBL2010A2IV/
GY. One ½ in. trade size KO on each side,
½ in. and ¾ in. concentric KOs on end
and bottom.
Side Reducing Connector
For connecting HBL2000 Raceway
to HBL500 Raceway through side
of HBL2000 Raceway.
Flush Plate Adaptor
For feeding HBL2000 Raceway from
an existing wall outlet. ½ in. threaded
stud with steel locknut for grounding.
Wire Clip
For holding conductors in place in the
raceway base. For use when using
the HBL2000CAIV/GY cover only.
Ivory
Gray
Ivory HBL2089IV*
Ivory
Gray
Steel** HBL2000WCA
HBL2010A3IV
HBL2010A3GY
A: 3.69" (93.80)
B: 2.02" (51.18)
C: 1.79" (45.36)
A: 6.00" (152.40)
B: 3.25" (82.55)
HBL2051HIV
HBL2051HGY
A: 4.50" (114.30)
A: .44" (11.18)
B: .60" (15.17)
C: 1.24" (31.50)
Fittings
Coupling
For joining lengths of HBL2000 Raceway.
Ground Clamp
For connection of equipment grounding
conductor to provide an additional ground
to raceway. Galvanized steel.
Note: *HBL2001C couplings included.
**Galvanized Steel.
Description Catalog Number Description Color Catalog Number
Cutter
Portable cutter for HBL2000
Series Raceway. (Not for use
with HBL2000A series).
Steel** HBL2001C
A: 2.00" (50.80)
Steel** HBL2009GC
A: 1.00" (25.64)
HBL620C Touch-Up Paint Pen Ivory
Supporting Clip
For temporarily supporting lengths
of HBL2000 Raceway at any point.
Mount with #6 at head fastener.
Has set screw for locking to raceway.
Raceway must be screwed to the
wall for secure fastening.
Steel** HBL2003SC
Gray
A: 2.00" (50.80)
HBLIWEP
HBLGWEP
Tools
Cutter Replacement Blade Set HBL620BCK
Wiremold® is a registered trademark of the Wiremold Company.
®
Wiring Device-Kellems
Dimensions in Inches (mm)
R-11
Loading...