ASSEMBLY & INSTALLATION INSTRUCTIONS
Ume/Griffin Bow Sconce 201371
B466
UME GLASS
GRIFFIN GLASS
48376
1 OF 4
ASSEMBLY & INSTALLATION INSTRUCTIONS
Ume/Griffin Bow Sconce 201371
Component Parts
A Fixture
B Crossbar
C Ground Screw
D Threaded Stud (2)
E Knurled Ball (2)
B466
F Socket
G Collar
H Bulb (not included)
I Glass
J Glass Retainer
48376
2 OF 4
ASSEMBLY & INSTALLATION INSTRUCTIONS
Ume/Griffin Bow Sconce 201371
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products.
To Install Fixture (Figure 1)
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX PRIOR TO INSTALLATION.
1. Carefully unpack the xture (A) from the carton.
2. Thread two studs (D) into the appropriate holes in the crossbar (B) that align with xture (A) and desired orientation.
3. Using two machine screws (not provided) attach crossbar (B) to the electric box using outer oval holes to orient x-
ture.
Note: A new electric box comes with screws. When replacing a fixture, retain the existing screws for use with the new
fixture.
B466
4. Adjust the studs (D) to proper length to ensure the xture will t snugly against the wall.
5. Using suitable wire connectors (not provided) connect fixture wires to supply (white to white and black to black). At-
tach a pigtail lead to the crossbar ground screw (C). Connect all ground wires (bare copper or green to bare copper or
green).
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.
6. Carefully tuck all wires behind xture, push x-
B
MACHINE
SCREWS
ture rmly against the wall. Secure by threading
knurled balls (E) onto threaded studs (D).
Note: Be sure no wires are pinched between the
wall and the fixture. Be sure threaded studs are
fully seated in knobs.
7. See instructions on next page for installing accent shade and glass.
C
A
E
D
(Figure 1)
48376
3 OF 4
ASSEMBLY & INSTALLATION INSTRUCTIONS
Ume/Griffin Bow Sconce 201371
To Install Glass Option 1 (Figure 2)
1. Install bulb (H), not included, into socket (F).
2. Carefully unpack glass (I) and thread onto
collar (G) and up to nozzle.
NOZZLE
B466
3. Restore electricity at the main breaker
To Install Glass Option 2 (Figure 3)
1. Install bulb (H), not included, into socket (F).
2. Carefully unpack glass (I) and place over
socket (F) and up to nozzle. Thread glass
retainer (J) onto collar (G) to secure glass
(I).
G
NOZZLE
G
A
F
H
I
(Figure 2)
A
F
3. Restore electricity at the main breaker
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you
enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
H
I
(Figure 3)
J
48376
4 OF 4
Loading...