Page 1
ASSEMBLY & INSTALLATION INSTRUCTIONS
Willow Sconce 209120
B459
46780
1 OF 3
Page 2
ASSEMBLY & INSTALLATION INSTRUCTIONS
Willow Sconce 209120
Component Parts
A Fixture
B Crossbar
C #8 Screws (2)
B459
46780
2 OF 3
Page 3
ASSEMBLY & INSTALLATION INSTRUCTIONS
Willow Sconce 209120
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products.
To Install Fixture (Figure 1)
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX PRIOR TO INSTALLATION.
1. Carefully unpack xture (A) from the carton.
2. Using (2) #8 machine screws (not provided), attach crossbar (B)
securely to the junction box as shown in Figure 1.
Note: A new electric box comes with screws. When replacing an
existing xture, retain screws for use with the new xture
3. Hold xture (A) close to wall. Using suitable wire connectors (not
provided), connect xture wires to supply wires (white to white and
black to black). Connect all ground wires (bare copper or green to
bare copper or green).
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON
SECURELY, AND NO BARE WIRE IS EXPOSED.
4. Place xture (A) over crossbar (B). Secure with #8 screw (C) on
top and bottom of xture.
Note: Be sure no wires are pinched between xture and wall.
SOCKET
A
C B
B459
5. Install bulb (not included) into socket.
6. Restore electricity at main breaker.
MACHINE
SCREWS
(Figure 1)
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you
purchased this product. We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this
xture.
46780
3 OF 3
Loading...