Hubbardton Forge 272710 User Manual

Assembly Instructions C23

For Formae Portables 27-2710 & 27-2720

To Install Glass (Figure 1)

Component Parts

A Retaining Ring
B Glass
C Lamp Socket
D Socket Tool
H White Washer

1. Remove retaining rings (A) from lamp sockets (C). Retaining Rings are shipped

installed.

2. Place glass (B) over lamp socket (C).

3. Slip white washer (H) onto lamp socket (C) so it rests on the bottom of glass (B).

4. Thread retaining ring (A) on to lamp socket (C) using socket tool provided (D) until

it rests on the white washer (H).

To Attach Shade

Component Parts

E Finial
F Shade
G Threaded Stud

(Figure 2)

1. Install shade (F) on to threaded stud (G).

2. Thread finial (E) on to threaded stud (G) until tight against shade (F).

3. Install light bulbs.

If you need further assistance, or find that you are missing any parts, please contact
the dealer from which you purchased this product. We hope you enjoy your fixture!

(Figure 1)

Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont

21125 Rev A

(Figure 2)