Hubbardton Forge 268422 User Manual

Glass Installation Instructions A11

For Pendants and Lamps using Glass Bowls

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

For fixtures requiring assembly, please refer to assembly instructions before installation.

Component Parts

A Nut
B Plastic Washer
C Rubber Washer
D Glass Bowl
E Vase Cap or Leaf Assembly
F Threaded Ball
G Nipple

To Install

For Pendant style ceiling fixtures, please refer to fixture
installation instructions before installing glass.

1. Place Plastic Washer (B) then Rubber Washer (C) over

Nipple (G) against Nut (A).

Note: Rubber washer fits snugly to hold plastic washer in
place.

3. Place Glass Bowl (D) over Nipple (G) against Rubber

Washer (C) and secure with Vase Cap (E) and Threaded
Ball (F). It may be necessary to thread Nut (A) up or down
the Nipple (G) to allow Threaded Ball (F) to securely fasten
to nipple.

Note: Leaf style pendants use the Leaf Assembly in place
of the Vase Cap.

If you need further assistance, or find that you are missing any
parts, please contact the dealer from which you purchased this
product. We hope you enjoy your fixture!

Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

14013