Hubbardton Forge 217394 User Manual

Installation Instructions B4

g

For Direct Wire Wall Mounted Fixtures - A

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all
applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Component Parts

A Screw Cap
B Nipple
C Lock Nut
D Green Ground Screw

To Install

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (E, not provided) fasten the

crossbar (I) to the electric box (see illustration).

Note: A new electric box comes with screws. When
replacing a fixture, retain the existing screws for use
with the new fixture.

4. Thread the nipple (B) into the crossbar and secure with

lock nut (C). Adjust the nipple to proper length to
ensure the fixture will fit snugly to the wall.

5. Using suitable wire connectors (not provided) connect

fixture wires to supply wires—white to white (H) and
black to black (F). If the fixture is wired with twin lead
lamp cord, connect white to ribbed side of the fixtures
cord, black to smooth side. Connect all ground wires
(G) to crossbar ground screw (D).

Caution: Make sure wire connectors are twisted on
securely, and no bare wire is exposed.

6. Place fixture firmly against wall and fasten with screw

cap (A).

7. Install light bulb(s) (not provided).

8. Restore electricity at main breaker.

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

e noted on fixture. Use only recommended bulbs with fixture.

E Box Machine Screws (not

provided)

F Black Wire
G Ground Wire

This illustration represents a typical
fixture and may not match every style.

H White Wire
I Crossbar

Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

14032 RevA