Hubbardton Forge 204903 User Manual
Installation Instructions B203
For Staccato Sconce 20-4903 Page 1 of 2
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all
applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.
Please Note: After installation extra hardware and accessories are possible due to our kits are used on multiple products
and options.
To Mount Fixture to Wall
Component Parts
A Fixture Assembly
B Screw Cap
C Threaded Nipple
D Lock Nut
E Crossbar
F Ground Screw
(Figure 1)
To Install
Caution: Be sure power is off at the main
breaker box prior to installation.
1. Carefully unpack the fixture from the
carton.
2. Using two machine screws (not provided)
attach crossbar (E) to the electric box.
Note: A new electric box comes with
screws. When replacing a fixture, retain
the screws for use with the new fixture.
3. Thread the nipple (C) into the crossbar
(E) and secure with lock nut (D). Adjust
the nipple to proper length to ensure the
fixture will fit snugly to the wall.
(Figure 1)
4. Using suitable wire connectors (not provided),
connect the fixture wires to the supply wires, (white to white, black to black, bare copper or green to bare copper
or green). If the fixture is wired with twin lead lamp cord, connect the ribbed side to white, and the smooth side to
black. Ground the crossbar using the green ground screw (F) to secure a pigtail lead to the crossbar.
Caution: Make sure wire connectors are twisted on securely and no bare wires are exposed.
5. Carefully tuck all wires behind the fixture,
place fixture firmly against the wall and fasten screw cap (B). Note: If shade option is being installed leave screw
cap slightly loose until shade is installed.
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
(continued)
24415
Installation Instructions B203
For Staccato Sconce 20-4903 Page 2 of 2
To Install Glass
Component Parts
G Socket
H Bulb (included)
I Retaining Ring
J Glass
K Socket Tool
(Figure 2)
1. Remove retaining ring (I) from socket (G). Retaining ring is shipped installed.
2. Install light bulb (H). Be careful not to touch bulb with bare hands; oil from
the hands will dramatically reduce bulb life.
3. Slip glass (J) over socket (G) and thread retaining ring (I) onto the socket (G)
using provided socket tool (K).
4. Restore electricity at the main breaker. If installing shade option wait to restore
electricity until after shade is installed.
To Install Optional Shade
Component Parts
L Shade
M Front Plate
(Figure 3)
1. Slip shade (L) onto fixture assembly so it rests against wall and behind
front plate (M).
2. Tighten screw cap.
3. Restore electricity at the main breaker.
(Figure 2)
If you need further assistance, or find that you are missing any parts, please
contact the dealer from which you purchased this product. We hope you
enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper
installation, lamping or use of this fixture.
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735
(Figure 3)
24415
Loading...