Hubbardton Forge 204795 User Manual

Installation Instructions B261

Dune Sconce 20-4795 Page 1 of 3

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all
applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Prepare Fixture

Component Parts

A Decorative Front
B Fixture Body
C Wall Mount Bracket
D #8 Black Pan Head Screws (6)
L #8 Pan Head Screws w/ lock washer

(Figure 1)

1. Carefully unpack the fixture from the

carton.

2. Remove black pan head screws (D) from

Fixture Body (B) and remove decorative
front (A). Set aside for later use.

3. Remove pan head screws w/lock washer

(L) from fixture body and remove wall
mount bracket. Set aside for later use

To Mount Fixture to Wall

Component Parts

B Fixture Body
C Wall Mount Bracket
E Anchors (2)
F # 10 Screws (2)
G Green Ground Screw
H Cupped Washer

Caution: Be sure power is off at the main breaker box
prior to installation.

(Figures 2 & 3)

(Figure 1)

1. Center the wall mount bracket (C) over the electrical

box being sure to hold it plum and level. With a
pencil, mark the location of all mounting holes in the
wall mount bracket on the wall behind.

IMPORTANT: Wall mount bracket must be secured
to a solidly mounted electrical box and/or a framing
member in at least two locations. Do not depend on
drywall anchors alone to support this fixture. If in
doubt, contact a qualified electrician.

(Figure 2)

Put the wall mount bracket down and drill 1/4" holes in the locations marked on the wall. For holes using anchors,
place the tapered end of the anchors (E) into the holes and gently tap them flush to the wall using a light weight
hammer.

Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735

27144 Rev A

(continued)

Installation Instructions B261

Dune Sconce 20-4795 Page 2 of 3

2. Thread the wires in the

electrical box through the
center hole in the wall
mount bracket while
moving the bracket into
position. Attach wall
mount bracket to electrical
box using two machine
screws( not provided)
Using the #8 screws (D),
screw the bracket securely
to the wall. Be careful not
to over-tighten or strip the
anchors.

3. Hold the fixture body (B)

close to the wall mount
bracket (C) and using
suitable wire connectors
(not provided), connect
fixture wires to supply
wires (white to white or
ribbed and black to black
or smooth). Ground the mounting bracket using the green ground screw (G) and cupped washer (H) to secure a
pigtail lead to the bracket and connect all ground wires (bare copper or green to bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and no bare wires are exposed.

4. Carefully tuck all wires behind the fixture assembly and inside the wall mount bracket and place the fixture (B)

firmly onto bracket (C) and fasten with #8 pan head screw w/lock washer (L)

(Figure 3)

(Figure 3).

To Install Glass & Decorative Front

Component Parts

A Decorative Front
I Bulb (Included)
J Glass
K Thumb Screw (2)

(Figures 4 & 5)

1. Slide glass tube (J) into decorative front (A).

Secure glass to decorative front using thumb
screws (K) (Figure 4). Set aside.

2. Install bulbs (I). Be careful not to touch bulb

with bare hands; oil from the hands will
dramatically reduce bulb life.

3. Slide decorative front and glass (A & J) over

bulbs and socket (B).

4. Secure decorative front (A) to fixture body (B)

using #8 black screws (D).

5. Restore electricity at main breaker.

(Figure 4)

(continued)

Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735

27144 Rev A