Huawei V100R001C02 User Manual

Download

Page 1

Huawei IP Phone eSpace 6830 V100R001C02

User Manual

Issue

Date

2011-09-07

HUAWEI TECHNOLOGIES CO., LTD.

Page 2

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China

Website:

http://www.huawei.com

Email:

support@huawei.com

Page 3

Huawei IP Phone eSpace 6830 User Manual

Contents

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Contents

1 Safety Precautions.............................................................................................................................. 1

2 Product Overview .............................................................................................................................. 3

2.1 Packing List ...................................................................................................................................................... 3

2.2 Features ............................................................................................................................................................ 4

2.3 Hardware specifications ................................................................................................................................... 5

2.4 Technical specifications.................................................................................................................................... 5

3 Installing the eSpace eSpace 6830 ................................................................................................. 8

3.1 Cable Connections of the eSpace 6830 ............................................................................................................ 8

3.2 Starting the eSpace 6830 .................................................................................................................................. 9

3.3 Safety Compliance ........................................................................................................................................... 9

3.4 Warranty of Quality .......................................................................................................................................... 9

4 Configuring the eSpace 6830......................................................................................................... 11

4.1 Configuring the Phone Through the Keypad .................................................................................................. 11

4.2 Configuring the Phone Through Web Browser .............................................................................................. 13

4.2.1 Accessing the Web Configuration Menu ............................................................................................... 13

4.3 Configuration Page ......................................................................................................................................... 14

4.3.1 Saving the Configuration Changes ........................................................................................................ 17

4.3.2 Rebooting the eSpace 6830 Remotely................................................................................................... 17

5 Using the eSpace 6830 ..................................................................................................................... 18

5.1 Getting to Know the Keyboard ...................................................................................................................... 18

5.2 Instructions of Using the Phone ..................................................................................................................... 19

5.2.1 Handset, Speakerphone, and Headset Modes ........................................................................................ 19

5.2.2 Multiple SIP Accounts and Lines .......................................................................................................... 20

5.2.3 Making a Call ........................................................................................................................................ 20

5.2.4 Answering a Call ................................................................................................................................... 21

5.2.5 Do-Not-Disturb ..................................................................................................................................... 21

5.2.6 Call Waiting/Call Holding ..................................................................................................................... 21

5.2.7 Muting ................................................................................................................................................... 21

5.2.8 Call Transfer .......................................................................................................................................... 21

5.2.9 Three-Way Conference Call .................................................................................................................. 22

5.2.10 Voice Messages ................................................................................................................................... 23

Page 4

Huawei IP Phone eSpace 6830 User Manual

Contents

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

iii

5.2.11 Manager and Secretary Function ......................................................................................................... 23

5.2.12 BLF Function ...................................................................................................................................... 23

6 Restoring Factory Default Settings ............................................................................................. 25

7 FAQs .................................................................................................................................................... 26

Page 5

Huawei IP Phone eSpace 6830 User Manual

1 Safety Precautions

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

1 Safety Precautions

General Requirements



Before you install and use the device, read these safety precautions carefully and observe them during operation.



During storage, transportation, and operation of the device, keep the device dry.



During storage, transportation, and operation of the device, avoid collision and crash of the device.



Never attempt to dismantle the device by yourself. In case of any fault, contact the appointed maintenance center for repair.



Without prior written consent, no organization or individual is permitted to make any change to the structure or safety design of the device. Huawei Technologies Co., Ltd. is not liable to any consequences or legal issues due to such changes.



While using the device, observe all applicable laws, directives and regulations, and respect the legal rights of other people.

Environmental Requirements



Place the device at a well-ventilated place. Do not dispose the device to direct sunlight.



Keep the device clean and free of dusts.



Place the device on a stable platform.



Do not place any object on top of the device. Otherwise, the device may be too hot during operation. It can even be deformed or damaged by the heavy load.



Keep at least 10 cm between the device and the closest object for heat dissipation.



Do not place the device on or near any object that can easily catch fire, such as something made of rubber.



Keep the device far away from any heat source or bare fire, such as a candle or an electric heater.



Keep the device far away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator.

Operating Requirements



Do not let a child operate the device without guidance.



Do not let a child play with the device or any accessory. Swallowing the accessories may lead to peril.

Page 6

Huawei IP Phone eSpace 6830 User Manual

1 Safety Precautions

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential



Use the accessories provided or authorized by the manufacturer only.



The power supply of the device shall meet the requirements of the input voltage of the device. Use the provided surge protection power socket only.



Before plugging or unplugging any cable, shut down the device and disconnect it from the power supply.



While plugging or unplugging any cable, make sure that your hands are completely dry.



Do not tread on, pull, or over-bend any cable. Otherwise, the cable may be damaged, leading to malfunction of the device.



Do not use an old or a damaged power cable.



During lightning weather, stop using the device and disconnect it from the power supply. Unplug the power plug and the ADSL(Asymmetric Digital Subscriber Line) twisted pair (the radio frequency cable) to avoid lightning strike.



If the device is not used for a long time, disconnect it from the power supply and unplug the power plug.



Do not look directly into the optical interface and the laser-transmitting interface on the device, or the infrared transmitting interface on the remote control with your eyes. Otherwise, your eyes may be injured.



In any of the following cases, stop using the device, disconnect it from the power supply, and unplug the power plug immediately: there is smoke emitted from the device, or there is some abnormal noise or smell. Contact the specified maintenance center for repair.



Avoid any object (such as metal shavings) from entering the device from the heat dissipation intakes.



Before connecting any other cable, connect the ground cable of the device first. Do not disconnect the ground cable until you disconnect all other cables.



Make sure that the three-phase power socket is grounded reliably. The neutral line and the live line shall not be connected inversely.



Do not scratch or abrade the shell of the device. This may lead to malfunctions of the device. The shed painting material may also lead to skin allergy.

Cleaning Requirements



Before cleaning the device, stop using it and disconnect it from the power supply.



Use a piece of soft dry cloth to clean the device.



Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.

Page 7

Huawei IP Phone eSpace 6830 User Manual

2 Product Overview

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

2 Product Overview

2.1 Packing List

The following items are included in the eSpace 6830 package. Verify the packing items. Contact your distributor immediately if any one is missing.

Table 2-1 Packing items

Item

Quantity

Main case

Handset

Coiled handset cord

Specialized power adapter

Straight-through cable

Phone Stand

Wall-mount bracket

eSpace 6830 Quick Start

PVC card

Paper card

Warranty card

Certificate of quality

Page 8

Huawei IP Phone eSpace 6830 User Manual

2 Product Overview

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Product Picture

Product Overview

The eSpace 6830 is a next-generation enterprise IP phone. The eSpace 6830 provides rich functions, is easy to use, and supports integrated PoE and HD Voice.

2.2 Features

Table 2-2 Key features of the eSpace 6830

Feature

Description

Open standard compatibility

SIP 2.0, TCP/IP/UDP, RTP/RTC, HTTP/HTTPS, ARP/RARP, ICMP, DNS (A record and SRV record), DHCP, PPPoE, TFTP, NTP and Telnet.

High audio quality

Adopting the advanced DSP technology.

Traditional features

Standard voice features including caller ID display, call waiting, call holding, call transferring, call forwarding, call blocking, call rejecting, mute and off-hook autodial.

Advanced functions

Supporting the following functions:



Multi-lines



Headset enabled



Backlit graphic LCD



Five navigation keys



Function keys such as call holding, headset mode, call forward, three-party conference, address book, voice message box, do not disturb, and mute



7multi-purpose keys

Advanced features



Customized ring tones



Download of ring tones



Download of address book in xml format and screensaver files



SRTP voice call encrypted with the Advanced Encryption Standard (AES)



Setting of dialing rule and advance business

Page 9

Huawei IP Phone eSpace 6830 User Manual

2 Product Overview

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Feature

Description

functions, such as BLF,BroadSoft SCA.



For details of advanced features, see the Huawei IP Phone eSpace 6810&6830&6850&6870 Administrator Guide

2.3 Hardware specifications

Table 2-3 Hardware specifications

Item

Specification

Ethernet ports

Providing two Ethernet ports of 10/100 Mbit/s and full/half duplex

Ethernet polarity can be automatically detected.

Graphic LCD display

Pixel:180x90

Headset port

RJ-9 headset port

LED

LED indicators that can be on in two colors (green and red)

PoE

The build-in automatic detector obtains the PoE that is based on the IEEE 802.3af standard.

Universal switching

Input: 100 V~240 V AC 50Hz or 60Hz

Power adapter

Output: +5V DC, 1200mA, UL certified

Dimension (W × H × D)

222mm x 186mm x 93mm

Weight

0.98kg

Temperature

0 °C to 45 °C

Humidity

10% to 90% (non-condensing)

Compliance

FCC/CE/ROHS

2.4 Technical specifications

Table 2-4 Technical specifications of the eSpace 6830

Item

Specification

Lines

Four straight-through lines.

Supported protocol

Supporting the SIP 2.0, TCP/UDP/IP, HTTP, HTTPS, PPPoE,

Page 10

Huawei IP Phone eSpace 6830 User Manual

2 Product Overview

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Item

Specification

RTP/RTCP, SRTP by SDES, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, NTP/SNTP, and SIMPLE/PRESENCE protocols.

Supporting RFC3903, RFC3856, RFC3863, and RFC4235.

Supporting RFC 3428.

Function keys



Eleven dedicated keys: Hold, SEND, SPEAKER, Headset Mode, TRNF (transfer), CONF (conference), MUTE/DEL, Volume, INTERCOM, Phone Book, and MSG (message).



Five navigation keys.



7 multi-purpose keys and Three soft keys.

Device management Supporting the upgrade of the NAT-friendly remote software

(through TFTP or HTTP) for the devices that are deployed behind the firewall or the NAT.

Supporting the address book function.

Audio features

Handset, Hands-free, and headset modes in full duplex.

Advanced DSP.

Dynamic negotiation of codec and voice payload length.

HD Voice.

Supporting the G.723.1 (6.3K or 5.3K), G.729AB, G.711 µ/A, G.726-32K, G.722 (broadband), and iLBC CODECs.

In-band and out-of-band DTMF (in audio, RFC2833, or SIP INFO mode).

Echo Cancellation.

Supporting the sidetone cancellation, advanced jitter buffer control, and packet delay and loss concealment.

Telephony features

Intuitive GUI, download of the phone book (XML), voice mail indicator, customized ring tones.

Call holding, call transferring (attended/blind), Do-Not-Disturb, call forwarding, call waiting, call waiting mute, redial, call log, volume control, caller ID display, multi-party conference call, dialing with a prefix, off-hook autodial, automatic answer, and dialing.

Network and provisioning

Supporting manual configuration for static network through keyboard and LCD, or by logging in to the Web page. Dynamic network parameters are provided by the DHCP server.

Supporting NAT traversal by using IETF STUN and symmetric RTP.

Supporting AES-based IP phone configuration file update. Supporting unified IP phone configuration through the BroadSoft

Page 11

Huawei IP Phone eSpace 6830 User Manual

2 Product Overview

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Item

Specification

XML Provision server.

Supporting 802.1x-based network accessing authentication.

Supporting the IEEE 802.1p/q tagging (VLAN) and Layer 3 QoS protocols.

Software upgrade

Supporting firmware upgrade through TFTP or HTTP and authentication of configuration files before changing.

Providing the specific URL for users to download configuration files and upgrade files.

Advanced server features

Message waiting indicator light. Supporting DNS SRV query.

Security

Supporting DIGEST authentication and encryption by using MD5, and SRTP.

Page 12

Huawei IP Phone eSpace 6830 User Manual

3 Installing the eSpace eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

3 Installing the eSpace eSpace 6830

3.1 Cable Connections of the eSpace 6830

Figure 3-1 Connecting the eSpace 6830

Page 13

Huawei IP Phone eSpace 6830 User Manual

3 Installing the eSpace eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Table 3-1 Description of the connectors

No.

Connector

Description

(1)

PC port

The port is the 10/100 Mbit/s RJ-45 PC port. You can use the straight-through cable to connect the PC port. When using the PC phone, you can configure the port. (Optional)

(2)

LAN port

The port is the 10/100 Mbit/s RJ-45 LAN port. You need to use the straight-through cable to connect the LAN port to the Ethernet port.The phone supports PoE (802.3af) power. In this case, you must connect the port to the switch supporting PoE power.

(3)

Power port

5Vpower port. After the network cable connection is complete, use the special power adapter of the phone to connect the power port and power to switch on the phone.

(4)

Headset port

RJ-9 port. If you want to use the headset for communication, install the headset socket to the port.

(5)

Handset port

RJ-9 port. If you want to use the headset for communication, install the headset socket to the port.

3.2 Starting the eSpace 6830

After the eSpace 6830 is powered on, a progress bar is displayed on its screen. This progress bar disappears after the startup page is accessed.

3.3 Safety Compliance

The eSpace 6830 complies with the Federal Communications Commission (FCC), Confermite Europeenne (CE), and various safety standards. The eSpace 6830 specialized power adapter is compliant with the Underwriter Laboratories (UL) standard. Use only the matching power adapter provided with the package. The manufacturer's warranty does not cover damages to the phone caused by unsupported power adapters.

3.4 Warranty of Quality

If you purchased the eSpace 6830 from a distributor, contact the distributor for replacement, repair, or refund. If you purchased the product directly from Huawei, contact Huawei sales and service representatives for a return materials authorization (RMA) number before you return the product. Huawei reserves the right to remedy the warranty policy without prior notification.

Page 14

Huawei IP Phone eSpace 6830 User Manual

3 Installing the eSpace eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Use a power adapter provided by the eSpace 6830; otherwise, damages can be caused to the products and the manufacturer warranty is void.

Page 15

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

4 Configuring the eSpace 6830

4.1 Configuring the Phone Through the Keypad

The phone automatically exits the menu when an incoming call comes or the phone is off-hook. If no keypad operation is performed within one minute, the IP phone automatically displays the standby image.

Table 4-1 Keypad configuration menu

Configuration Description

Call History

Displays history records of received, dialed, transfered and missed calls.

Status

Displays the network status, account status, software version, MAC address, and hardware version of the phone.

Phone Book

Displays the phone book and related option.



[New Entry]Add a phone book record.After the fields such as First Name, Last name, Number, and Acct are set or selected, select Confirm Add and press MENU to confirm the operation. Select Cancel & Return and press MENU to cancel the added

information and return to the previous menu.



[Download Phonebook]Select Download Phonebook and press MENU. Then the phone downloads the updated phone book from

the TFTP or HTTP server. This requires corresponding configuration of the download items of the phone book on the Web page.



[Delete All Entries]Delete all contacts in the phone book.

Preference

Displays the preference submenus of a user.



[Do Not Disturb]Choose this menu to enable or disable the DND function.



[Ring Tone]Choose this menu to set different ring tones.



[Ring Volume]Press MENU to hear the selected ring volume. Press LEFT or RIGHT to turn up or turn down the volume.



[LCD Contrast]Choose this menu and Press LEFT or RIGHT to set the LCD screen contrast.

Page 16

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Configuration Description



[LCD Brightness]Press LEFT or RIGHT to set the LCD brightness of the IP phone in active and idle states. The value ranges from 0 to



[Download SCR XML]Send a request to the HTTP/TFTP server for downloading a screen saver to replace the original one. For details on how to configure this service, see the Huawei IP Phone eSpace 6810&6830&6850&6870 Administrator Guide or contact the administrator.



[Erase Custom SCR]Restore the factory setting for the standby image.



[Display Language]Choose this menu to select the language.



[Time Settings]Set the date and time of the IP phone.

Press LEFT or select Back to return to the main menu.

Config Display the configuration submenus.



[SIP]Set the SIP server for each account, including Account, SIP proxy, Outbound proxy, SIP user ID, SIP Auth ID, SIP password, SIP transport, and Audio CODECs.



[Upgrade]Configure the firmware server and the file download server. Select either TFTP or HTTP to upgrade the firmware or configure the phone.



[Factory Reset]Type the MAC address on back of the phone. Press OK softkey to restore the factory reset settings. Factory reset clears all configurations and restores the phone to factory settings.



[Layer 2 QoS] Configure the 802.1Q VLAN tag and 802.1P priority.

Press LEFT or select Back to return to the main menu.

Factory Functions

These items are used for factory testing and not recommended for users.



[Audio Loopback]Speak to the handset. If you hear your voice in the handset, your audio works well. Press MENU to exit the mode.



[Diagnostic Mode]All LEDs are on. Press any key on the keypad to display the key name on the LCD. Pick up the handset or press MENU to exit the diagnostic mode.

Press LEFT or select Back to return to the main menu.

Network

Enable or disable the DHCP protocol. Set the IP address, subnet mask, and gateway address by using the keypad if the static IP mode is selected.

Reboot

Reboot the device.

Exit

Exit the menu.

Page 17

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

4.2 Configuring the Phone Through Web Browser

The Web server embedded in the eSpace 6830 responds to the HTTP, HTTPS GET, or POST requests. Embedded HTML pages allow a user to configure the IP phone through any Web browser such as Microsoft Internet Explorer or Mozilla Firefox.

4.2.1 Accessing the Web Configuration Menu

Connect the phone and computer on a reachable network. Do as follows: Connect the computer to the same hub or switch as the phone is connected to. In absence of a

hub/switch (or free ports on the hub/switch), connect the computer directly to the phone by using the PC port on the phone. Make sure that the phone is powered on and displays the IP address.

To access the Web configuration menu of the phone, do as follows:

1. Start the Web browser on your computer.

2. Enter the IP address of the phone in the address box of the browser. If the phone is

properly connected to a working Internet. The format of the address is xxx.xxx.xxx.xxx, in which xxx stands for a number from 0-255. You can use this number to access the Web configuration menu. For example, if the phone displays 10.10.10.1, enter http://10.10.10.1 in the address box of the browser.

3. Enter the administrator password(the default password is admin.) to access the Web

configuration menu.

Figure 4-1 Login page

Page 18

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

4.3 Configuration Page

This section describes the options of Status and Basic Settings on the Web configuration page.

The functions available for the end user are as follows:



Status: Display the network status, account status, software version, and MAC address of the phone.



Basic Settings: Basic preferences such as date and time settings.

Figure 4-2 Status page

Table 4-2 Device configuration on the Status tab page

Field

Description

MAC Address

The device ID in the hexadecimal format. This is an important ID for service provider to solve problems.

IP Address

The IP address of the eSpace 6830.

Part Number

The code of a product.

Product Model

The product model.

Software Version

Information about the current software version. The value of prog indicates the main version number.

System Up Time

The power-on duration since the last reboot.

Page 19

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Field

Description

System Time

The current time of the system.

Registered

Whether accounts are registered on the related SIP server(s). The eSpace 6830 supports 4 unique SIP accounts.

PPPoE Link Up

Whether the PPPoE connection is enabled when the phone is connected to a DSL modem.

Figure 4-3 Basic setting page

Table 4-3 Description of the basic setting page

Field

Description

End User Password

This parameter allows changing the login password of an end user.

This field is case sensitive with a maximum length of 30 characters.

IP Address

The eSpace 6830 operates in two modes:



DHCP/PPPoE Mode:

− All the field values for the static IP

mode are not available even though they are stored in the Flash memory. The eSpace 6830 acquires its IP address from the first DHCP

Page 20

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Field

Description

server that the eSpace 6830 detects on its LAN. To use the PPPoE feature, set the PPPoE account. The eSpace 6830 establishes a PPPoE session if any of the PPPoE fields are set.

− Host Name and Domain Name:

The special DHCP options that are added to the DHCP Discover and DHCP Request after configuration.

− Preferred DNS: The eSpace 6830

uses the DNS server if Preferred DNS is configured.



Static IP Mode: Configure all of the following fields: IP address, Subnet

Mask, Gateway, Default Router IP address, DNS Server 1 (primary) and DNS Server 2 (secondary).

802.1X mode

This parameter is set to perform the 802.1X authentication when the IP phone is connected to a switch. You can click Disable to disable the authentication function, and click EAP-MD5 to perform the registration authentication.



Identify ID used during the 802.1x authentication.



MD5 Password MD5 password used during the 802.1X authentication.

Iine Keys

This parameter is set for specifying function modes of line keys. By default, the value of Key Mode is Line, which is used by common lines. If the value of Key Mode is Shared Line, it indicates that the BroadSoft SCA functions are enabled and that accounts scattered in various areas can share the line.

Multi-Purpose Keys

The optional values are Speed Dial, Busy Lamp Field(BLF),

Presence Watacher, eventlist BLF, Speed Dail via active account, and Dial DTMF.

Each key corresponds to an account, that is, a user number is set for each key.

Time Zone

This parameter controls the date and time display according to the specified time zone. If the DHCP Option 2 is enabled, the DHCP server overrides and centrally controls the setting of Time Zone in the phone. The feature functions on the phone only when you set the NTP server correctly.

LCD Backlight Brightness

This parameter is set for adjusting the LCD brightness of the IP phone in active and idle states. The value ranges from 0 to 8.

LCD Contrast

LCD contrast. The value ranges from 0 to 20.

Time Display Format

The LCD time is displayed in 12-hour or 24-hour format.

Page 21

Huawei IP Phone eSpace 6830 User Manual

4 Configuring the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Field

Description

Disable in-call DTMF display

The default value is No. If the parameter is set to Yes, the DTMF digits that are pressed during the call will not be displayed on the LCD for security reasons.

Disable Missed Call Backlight

The default value is No. By default, the LCD backlight is on when a missed call exists.

HEADSET Key Mode

Select default answering or dialing mode as the headset mode. When selecting a default mode, press HEADSET to enter the headset dialing status. If you press HEADSET when setting Toggle Headset/Speaker, the headset icon is displayed on the

LCD. In this case, press , you can make a call or answer a call in Headset mode.

Call History Flash Writing

This parameter is set for configuring the duration of recording data of Call History, Phone Book, and Settings on the Web configuration page into flash memory.



Write Timeout Write timeout indicates that the duration of flash writing.

The range is 30-3600, in seconds. The default value is 300s.



Max Unsaved Log This parameter is set for adjusting the max flash writing

items during the recording duration. The range is 0-500. 0 means this option is disabled.

Do not change the value optionally. Consult the enterprise administrator before any change.

4.3.1 Saving the Configuration Changes

After changing the settings, click Update on the bottom of the page to save the change. If you want to change an item after submitting the setting, click a tab to access the configuration page. Then click Reboot to reboot the phone, and all the changes take effect.

4.3.2 Rebooting the eSpace 6830 Remotely

Click Reboot in the configuration menu to reboot the eSpace 6830 remotely. Wait 60 seconds to log in again.

Page 22

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

5 Using the eSpace 6830

5.1 Getting to Know the Keyboard

Figure 5-1 Getting to know the keypad

Table 5-1 eSpace 6830 keypad

Key

Description

LINEx  Four line keys with dual-color LED indicator lights. Each line

key supports an independent SIP account.



The four line keys provide the hands-free feature.

TRANSFER

Transfer the current call to another number.

CONF

Set up a three-party conference call for the caller and callee.

MUTE

Mute the call (the other party cannot hear your voice).

HOLD

Hold the current call, and press the corresponding LINE key to resume the call.

Page 23

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Key

Description

Massage Key

Press the key to receive voice mails or other messages.

Hands-free Key

Press the key to enter the hands-free mode. Press it again to exit the hands-free mode.

PhoneBook Key

Press the key to display the phone book and associated items.

SEND

Press the key to send a call after you have dialed phone numbers. Note: If you do not press SEND, the number will be sent after a

pre-configured time delay. After the phone is off-hook, press the key to redial the last dialed

number.

HEADSET

Dial or answer with the headset.

MENU  Enter the keypad configuration MENU mode when the phone

is in idle mode.



Use as MENU key to confirm the operation during keypad configuration.

<0>~<9>,<*>, and <#>

Standard phone pad: 10 digits, the corresponding 26 alphanumeric letters, and special characters.

Soft keys 1-4

Four soft keys, which can provide different functions, such as BackSpace and Cancel.

Multi-Purpose Keys

Implement functions of Speed Dial, Busy Lamp Field, Presence Watacher, and Eventlist BLF. You can also configure other functions on the Web page.

The operation of pressing SEND is effective only in the specified dialing time.

5.2 Instructions of Using the Phone

5.2.1 Handset, Speakerphone, and Headset Modes

You can switch the modes among handset, speakerphone, and headset.



To switch between the handset and speakerphone modes, press SPEAKER, that is, .



To switch between the handset and headset modes, press HEADSET.



To switch between the speakerphone and headset modes, press HEADSET or SPEAKER, that is, .

Page 24

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

5.2.2 Multiple SIP Accounts and Lines

The eSpace 6830 supports 4 independent SIP accounts. Each SIP account matches with a SIP server, users, and NAT. Each of the twofour line keys matches with one SIP account. In off-hook state, when you press the corresponding LINE key or continuously press the same LINE key, the phone will switch among the 4 accounts. If the name of an account is configured, then the name is displayed on the LCD.

For example, set the account name of the two SIP accounts as VoIP 1 and VoIP 2. Ensure that each account is activated and registered. When LINE1 is pressed, you will hear a dial tone and see "VoIP 1" on the LCD. When LINE2 is pressed, you will hear a dial tone and see "VoIP 2" on the LCD.



To make a call, select the line you wish to use. You can switch lines before dialing any number.



When the phone is idle, press the corresponding key to answer the incoming call that is designated to an account.



If the line is occupied, the LED of the next available LINE key blinks to remind you of an incoming call. This feature should be supported by the SIP server.

5.2.3 Making a Call

Dialing

You can use headset and handset or press to make a phone call.

1. Pick up the handset; or press , or enable the headset. Or press a LINEx key to

activate the speakerphone. The corresponding LED is on.

2. Hear a dial tone. The LED light of the first line (LINE1) LED is on. You can also select

another SIP account by pressing the corresponding LINE key.

3. Enter the phone number and press SEND or Dial soft key.

Redialing

You can press SEND or the Redial soft key to redial the last dialed phone number. For the redialed number, the phone will use the same SIP account for dialing the last phone number.

Dialing Through the Call History

Call a phone number from the phone's call history. When you dial a call from the history, the phone uses the same SIP account that is used for this call last time.

1. Press MENU to access the main menu.

2. Select Call History and press MENU to confirm.

3. Select Answered Calls, Dialed Calls, Missed Calls,Transferred Calls or Forwarded

Calls depending on your requirements and press MENU to confirm.

4. Select a phone number by using arrow keys and press Dial soft key to dial the number.

Dialing Through the Phone Book

You can call a number through the phone book.

Page 25

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Each entry in the phone book can be assigned with an individual SIP account. The phone uses the SIP account to make a phone call.

1. Access the phone book by:

− Pressing DOWN.

− Pressing .

− Pressing MENU. Then select Phone book and press MENU.

2. Select a phone number by using arrow keys and press MENU to confirm.

3. Select Dial and press MENU to dial the number.

5.2.4 Answering a Call



An incoming call: The phone rings. The corresponding account LINEx blinks. Pick up the handset, press , enable the headset, or press the blinking LINEx key to answer

the call.



Multiple incoming calls: The call waiting tone is played. The next available line will blink in red. Answer an incoming call by pressing the LINEx key.

5.2.5 Do-Not-Disturb

To block all incoming calls, you can enable the Do-Not-Disturb (DND) function. The phone will not ring when an incoming call comes.

Toggle the DND function as follows:

1. Press MENU.

2. Select Preference by pressing the arrow keys, and then press MENU.

3. Select Do Not Disturb by pressing the arrow keys and press MENU.

4. Select Enable DND or Disable DND and press MENU.

5.2.6 Call Waiting/Call Holding



Hold: Keep a call on hold by pressing HOLD.



Resume: Resume the call by pressing the corresponding LINEx key with a blinking LED.



Multiple calls: Automatically keep an active call on hold by selecting another available LINEx key or answering another call. If an incoming call comes when all lines are in use, the call waiting tone (discontinuous tone) is displayed.

5.2.7 Muting

To enable or disable the muting function during a call, press MUTE. Then LINEx: MUTE is displayed on the LCD for the muted call.

5.2.8 Call Transfer

The eSpace 6830 supports both blind and attended (or supervised) transfer:

Page 26

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

Blind transfer

1. Pick up the handset; press , or enable the headset by pressing HEADSET to

establish a conversation.

2. Press TRANSFER for a dial tone.

3. Dial the number of a third party and press SEND to transfer the active call.

Attended (or supervised) transfer

To transfer calls by one account, the other one must be unoccupied.

1. Pick up the handset; press , or enable the headset by pressing HEADSET to

establish a conversation.

2. Press another available LINE key for a dial tone.

3. Dial the number of a third party and press SEND.

4. If the call is established, press TRANSFER and select the previous LINE key, the

transfer is finished.

− If the call is not established, press the previous LINE key to return to the previous

conversation.

− If the call is canceled and terminated before the call of the third party is connected,

the eSpace rings, indicating that a call is held.

To transfer calls across different SIP domains, the VoIP service providers must support this feature.

5.2.9 Three-Way Conference Call

The eSpace can host conference calls and support three-way conference calls.

Initiating a Conference Call

1. Pick up the handset, press , or enable the headset by pressing HEADSET to

establish a call.

2. Press another available LINE key to wait for the dial tone. Dial the phone number of the

third party and press SEND. If the call is established, press CONF to initiate a three-way conference call. If the call is not established, press LINEx key to resume the previous call.

3. Press the previous LINE key to enable the call to join the conference.

Ending a Conference Call

Press HOLD to pause the conference call and put all parties on hold. If you want to speak to an individual party, select the corresponding blinking LINEx key.

If the caller hangs up, the other two parties hang up automatically and the conference ends. If either the second party or the third party hangs up, the rest two parties establish the two-way conversation.

If both the second party and the third party hang up, the caller will hang up automatically. In this case, the conference ends.

Page 27

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

5.2.10 Voice Messages

Each line has a separate voice mail account. Each account requires a voice mail portal number to be configured through the Voice Mail User ID field.

The ways to check voice messages are as follows:



Check each line for waiting tone (discontinuous).

5.2.11 Manager and Secretary Function

After a line of the manager's phone is bound to a line of the secretary's phone, all calls to the manager will be connected to the secretary's phone at the same time. The secretary determines whether to transfer the call to the manager.

Assume that manager A's phone has two lines. LINE 1 is bound to LINE 1 of secretary B's phone, and LINE 2 is a private line. The following describes the manager and secretary function's process.

For details on how to configure the manager and secretary service, see the Huawei IP Phone eSpace 6810&6830&6850&6870 Administrator Guide or contact the administrator.

1. Customer C calls manager A.

The phone of secretary B rings. The LINE 1 indicator on both manager A's phone and secretary B's phone blinks.

2. Secretary B presses the LINE1 key and answers the call.

3. Secretary B presses the soft key SeizeLine soft key and enters the number of the

manager A's private line to call manager A. The call between secretary B and customer C is held.

4. Manager A presses the LINE2 key and answers the call from secretary B.

5. Manager A presses the LINE1 key and talks with customer C.

The call between manager A and secretary B is held. If secretary B hangs up, the call ends.

6. Manager A or customer C hangs up.

The call ends, and the LINE 1 indicator is off.



The eSpace 6830 allows one manager's phone to be bound to a maximum of two secretaries' phones, and one secretary's phone to be bound to a maximum of four managers' phones.



If two secretaries serve a manager, only one secretary answers the call and transfers it to the manager.

5.2.12 BLF Function

After the BLF function is enabled for eSpace 6830, you can press the corresponding DSS key to check the status of the monitored phone. You can press this key to directly make a call to the specified number.

For details on how to configure the BLF service, see the Huawei IP Phone eSpace 6810&6830&6850&6870 Administrator Guide or contact the administrator.

Page 28

Huawei IP Phone eSpace 6830 User Manual

5 Using the eSpace 6830

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

A user assigns the BLF function to a DSS key on phone A, and configures phone B as the monitored phone. The mapping between the phone B status and the BLF key on phone A is as follows:



When phone B is idle, the BLF key is steady green.



When phone B is ringing, the BLF key is blinking red.



When phone B is in a conversation, the BLF key is steady on.

Page 29

Huawei IP Phone eSpace 6830 User Manual

6 Restoring Factory Default Settings

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

6 Restoring Factory Default Settings

Restoring the factory default settings can clear all configuration information about the eSpace . Back up or print all the settings before you restore factory default settings. Huawei is not responsible for parameter loss or failier to connect to your VoIP service provider due to the operation of restoring the factory default settings.

To restore the factory default settings, do as follows:

1. Press MENU to access the keypad configuration UI menu, and select Config. Press

MENU to access submenus, and select Factory Reset. For details, see Table 4-1.

2. Type the MAC address that is printed on the bottom of the sticker by using the following

rules:

− 0~9: 0~9

− A: 22 (Press the 2 key twice and A is displayed on the LCD.)

− B: 222

− C: 2222

− D: 33 (Press the 3 key twice and D is displayed on the LCD.)

− E: 333

− F: 3333

For example, if the MAC address is 0018820E3956, type 00188203333956. The LCD displays the entered MAC address 0018820E3956.

If digits are duplicate in the MAC address, for example, 22, you need to press RIGHT to move the cursor or wait for four seconds for typing another 2.

3. Press the OK soft key.

Page 30

Huawei IP Phone eSpace 6830 User Manual

7 FAQs

Issue 01 (2011-09-07)

Huawei Proprietary and Confidential

7 FAQs

Question: What codecs are supported by the eSpace 6830? Answer:The eSpace 6830 supports a wide range of codecs: G711 a/µ, G729, G723.1,

G726-32k, and iLBC. Question: How many VoIP accounts are supported on the eSpace 6830? Answer:The eSpace 6830 IP phone supports 4 different SIP (VoIP) accounts. These accounts

can be on the same server or different servers of different service providers. Question: How to reject an incoming call? Answer:Press Reject softkey when receiving an incoming call or press DND to enable the

DND function when the phone is idle. The call is rejected and forwarded to your voice mailbox if you configure the voice mailbox.

Huawei V100R001C02 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual