Huawei USG6306, USG6330, USG6308, USG6360, USG6350 Quick Start Manual
...
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
HUAWEI USG6306/6308/6330/6350/6360/6370/6380/6390/6390E/6507/6530/6550/6570/6620/6630
V500R001
Quick Start
Issue: 03
Part Number: 31507764
Date: 2017-06-15
1
Thank you for using Huawei USG6306/6308/6330/6350/6360/6370/6380/6390/6390E/6507/6530/6550/6570/6620/6630 products. This USG product series protects your network against Internet threats. This Quick Start shows the product appearance
and provides the essential information required for installing the device and setting up Internet access. For detailed hardware
description and installation guidelines, refer to the
Hardware Guide
. For detailed configurations, refer to the
Administrator
Guide
.
Safety Precautions
Be aware of the following safety precautions when installing the device.
•Deactivatepowerwheneverpossiblebeforeperformingmaintenanceonpowercables.
•Alwayswearaproperly-groundedwriststrapbeforetouchingthedeviceorexpansioncardsinit.
Device and Accessories
Your product package includes the following items:
Secospace USG6000
4 HDD 5 PWR6 PWR
INPUT OUTPUT
ON
OFF
~100-240V;50/60Hz;2.5A
XXXXXXXXXXXXXXXXXXXXXXXXXXX
SM-HDD-SAS300G-B
Secospace USG6000
0 1 2 3 4 5 6 7 8 9 10 11
0
1
RST
SYS
ALM
PWR
HDD
MGMT
MODE
0/1
2
3
CONSOLE
MGMT
WSIC(Slot 3)
WSIC(Slot 2)
4 HDD 5 PWR 6 PWR
4x1GE SFP
Rubber feet
Management
port
Console port
ESD jack
Protection ground
terminal
Power socket
PGND cable
Power cable
retention clip
Quick start
M4 screw
Rack-mounting ears
AC power cable
M6 screw
10/100/1000M autosensing
Ethernet electrical port
0/1
2
3
Rear panel
Front panel
SN label (including the
SN and product model)
• The figure above uses the USG6370/6380/6390/6390E/6550/6570/6620/6630 as an example. The fixed interface board
on the front panel provides 8 10/100/1000M autosensing Ethernet electrical ports, 4 GE optical ports, and 2 USB ports.
The power module on the rear panel is removable. For the USG6306/6308/6330/6350/6360/6507/6530, the fixed interface
board on the front panel provides 6 service ports (4 GE electrical ports and 2 combo ports) and 1 USB port, and the power
module on the rear panel is non-removable.
• AC power cables vary by country or area, and the AC power cable in the figure is used for reference only.
Cabling
1. Connect the ground terminal on the device to the ground bar using a PGND cable.
2. Connect the device to the WAN through GE1/0/4 or by inserting an 4G LTE dongle on the USB port (the
USG6390E/6620/6630
does not support Internet access in 4G mode). Connect the device to the LAN through GE1/0/6
(GE1/0/4 and GE1/0/6 are examples, and you can use other ports as required).
2
3. Connect the device's MGMT port to the administrator PC using a network cable.
4. Insert the cable retention clip into the hole close to the power socket. Then insert the power cable into the socket, and fix
it using the clip.
5. Turn on the power switch. When the SYS indicator on the front panel is blinking (once every two seconds), the device is
running and ready for configuration.
Secospace USG6000
4 HDD 5 PWR 6 PWR
INPUT OUTPUT
ON
OFF
~100-240V;50/60Hz;2.5A
XXXXXXXXXXXXXXXXXXXXXXXXXXX
SM-HDD-SAS300G-B
Secospace USG6000
0 1 2 3 4 5 6 7 8 9 10 11
0
1
RST
SYS
ALM
PWR
HDD
MGMT
MODE
0/1
2
3
CONSOLE
MGMT
WSIC(Slot 3)
WSIC(Slot 2)
GE0/0/0
3
5
4 1
GE1/0/6
2
Administrator
Intranet
Front panel Rear panel
Switch
GE1/0/4
2
Cellular0/0/0
2
4G station
4G access or Ethernet access
Default Configuration
The following table lists the default configuration.
Item Description
MGMT (management port) The MGMT port is numbered GE0/0/0 and assigned with IP address 192.168.0.1.
Administrator account/password You can use the default account/password (admin/Admin@123) to log in through web or
console.
Connecting to the Internet
Collect the information in the following table based on the WAN mode you use and the IP address plan for the LAN. The underlined red texts in the table are examples for reference only.
Item Port Description
WAN GE1/0/4 WAN Mode Static IP IP Address: 1.1.1.1 Request your ISP or
network administrator
to provide the data.
Subnet Mask: 255.255.255.0
Default Gateway: 1.1.1.254
Primary DNS: 2.2.2.2
(Optional) Secondary DNS: 2.2.3.3
PPPoE User name/Password: user/Password123
DHCP
-
The device functions
as a DHCP client.
Cellular0/0/0
WAN Mode 4G
APN:
example
Request your ISP or
network administrator
to provide the data.
User name/Password: user01/Admin@123
Dial string:
*99#
Loading...