Huawei S10 101W User Manual

HUAWEI MediaPad 10 FHD

Left Keyboard port

Headphone jack

Light sensor

Main camera

Front camera

Microphone

Quick Start

1 Welcome

Thank you to use the HUAWEI product——HUAWEI MediaPad 10 FHD (“HUAWEI MediaPad” for short as below.)

For more information, please visit http://www.huaweidevice.com.

The figures in this guide are provided for your reference only. The appearance and display features may vary slightly depending on the actual product version.

2 HUAWEI MediaPad at a Glance

2 Micro USB port 9 Speaker 3 Right Keyboard port 10 Fill light

6 7 Volume key

Power button

13 14

SIM card port MicroSD card port

3 Installing the SIM and microSD Cards

1. Remove the back cover.

2. Install the SIM card.

When installing the SIM card, insert the card gently until it clicks firmly into place.

3. Install the microSD card.

4. Replace the back cover.

4 Switching Your HUAWEI MediaPad On

Press and hold the Power button until your HUAWEI MediaPad vibrates to switch on it.

The first time you switch on the HUAWEI MediaPad, complete the setup by following the on-screen instructions.

To switch off your HUAWEI MediaPad, press and hold the Power button until the screen displays a dialog box, and then touch dialog box.

When the HUAWEI MediaPad is switched on or malfunctions, press and hold the P ower button for 10 seconds. After release, your HUAWEI MediaPad vibrates, indicating that it is restarting.

5 Locking the Screen

When your HUAWEI MediaPad is turned on, press the Power button to lock the screen.

If your HUAWEI MediaPad is idle for a preset period of time, the screen will lock automatically.

in the

6 Unlocking the Screen

1. Press the Power button to wake up the screen.

2. Drag the unlock icon to any point of the circle that is

around the icon.

7 Warnings and Precautions

To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation. Unless otherwise specified, the term "device" refers to the device and its accessories.

Basic Requirements

During storage, transportation, and operation of the device,

keep it dry and prevent it from colliding with other objects.

Do not dismantle the device. In case of any fault, contact an

authorized service center for assistance or repair.

Without authorization, no organization or individual can

change the mechanical, safety, or performance design of the device.

When using the device, observe all applicable laws and

regulations and respect the legal rights of other people.

Environmental Requirements for Using the Device

Keep the device far from sources of heat and fire, such as a

heater or a candle.

Keep the device far from electronic appliances that generate

strong magnetic or electric fields, such as a microwave oven

or a refrigerator. Place the device on a stable surface. Place the device in a cool and well-ventilated indoor area. Do

not expose the device to direct sunlight. Keep the ambient temperature between 0°C and 35°C while

the device is being charged. Keep the ambient temperature

between 0°C to 35°C for using the device powered by a

battery.

Do not place any object (such as a candle or a water

container) on the device. If any foreign object or liquid enters

the device, stop using the device immediately, power it off,

remove all the cables connected to it, and then contact an

authorized service center. During thunderstorms, power off the device, and then remove

all the cables connected to it to prevent it from getting

damaged due to lightning strikes.

Traffic Security

Observe local laws and regulations while using the device. In addition, if using the device while driving a vehicle, comply with the following guidelines:

Concentrate on driving. Your first responsibility is to drive

safely. Do not talk on the device while driving. Use hands-free

accessories. When you have to make or answer a call, park the vehicle at

the road side before using your device. RF signals may affect electronic systems of motor vehicles.

For more information, consult the vehicle manufacturer. In a motor vehicle, do not place the device over the air bag or

in the air bag deployment area. Otherwise, the device may

hurt you owing to the strong force when the air bag inflates. Do not use your device while flying in an aircraft. Power off

your device before boarding an aircraft. Using wireless

devices in an aircraft may cause danger to the operation of

the aircraft and disrupt the wireless telephone network. It

may also be considered illegal.

Precautions for Using Wireless Devices

The device complies with the RF specifications when the

device is used in portable exposure co nditions or at a

distance of 1.5 cm from your body. Do not use the device where using wireless devices is

prohibited or may cause interference or danger. The radio waves generated by the device may interfere with

the operation of electronic medical devices. If you are using

any electrical medical device, contact its manufacturer for

the restrictions on the use of the device. Do not take the device into operating rooms, intensive care

units (ICUs), or coronary care units (CCUs).

Areas with Inflammables and Explosives

Do not use the device where inflammables or explosives are

stored, for example, in a gas station, oil depot, or chemical

plant. Otherwise, explosions or fires may occur. In addition,

follow the instructions indicated in text or symbols. Do not store or transport the device in the same box as

inflammable liquids, gases, or explosives.

Accessory Requirements

Use only the accessories supplied or authorized by the

device manufacturer. Otherwise, the performance of the

device may get affected, the warranty f or the device or the

laws and regulations related to telecommunications

terminals may become null and void, or an injury may occur. Do not use the power adapter if its cable is damaged.

Otherwise, electric shocks or fires may occur. Ensure that the power adapter meets the specifications

indicated on the device nameplate. Ensure that the power adapter meets the requirements of

Clause 2.5 in IEC60950-1/EN60950-1 and it is tested and

approved according to national or local standards. For pluggable device, the socket-outlet shall be installed near

the device and shall be easily accessible.

CAUTION - RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Battery and Charger

The battery can be charged and discharged hundreds of times before it eventually wears out.

Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger.

If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable at once. Otherwise, it may lead to an electric shock, a short circuit of the charger, or a fire.

+ 9 hidden pages