registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA , GOODWILL OR ANTICIPATED SAVINGS.
Contents
1 Getting to Know Your Phone ................................................1
Your Phone........................................................................................... 1
Keys and Functions ........................................................................... 2
15 Warnings and Precautions ............................................... 26
ii
1 Getting to Know Your Phone
Your P h one
1 Earpiece 11 Headset jack
2 Screen 12 Sym key
3 Left soft key 13 Input switch key
4 Audio player key 14 Enter key
5 Call/Answer key 15 Delete key
6 Keypad 16 End/Power key
7 Fn key 17 Message key
8 A/a key 18 Right soft key
9 Space key 19 OK/Confirm key
10 Charger jack 20 Navigation keys
The figure above shows the appearance of your phone
and is provided only for your reference.
1
Keys and Functions
Press… To…
z
Make a call from the SIM1 or SIM2 card in
standby mode.
z
Answer a call.
z
View call logs of SIM1 and SIM2 cards in
standby mode.
z
Power on or power off the phone (by
pressing and holding the key for about 3s).
z
End or reject a call.
z
Return to standby mode.
z
Access the main menu in standby mode.
z
Select a highlighted item.
z
Access Contacts in standby mode.
z
Return to the previous menu.
Access Audio player in standby mode.
Access Messaging in standby mode.
z
Access the main menu in standby mode.
z
Confirm a selection.
Scroll to the desired icon in the main menu
(by pressing
2
, , , and ).
Press… To…
z
Enter numbers, letters, and symbols.
z
Call the voicemail in standby mode (by
–
pressing and holding the 1 key for about 3s).
z
–
Select a submenu (by pressing the
corresponding number key).
Enter a space in text editing mode.
z
Lock the keypad in standby mode (by
pressing and holding the key for about 3s).
z
Switch between input methods in text editing
mode.
Switch between upper and lower case in text
editing mode.
z
Access FM radio in standby mode (by
pressing and holding the key for about 3s).
z
Display the Select symbol list in text editing
mode.
3
Screen Icons
Icon Indicates…
/
Signal strength.
New text messages.
/
New multimedia messages.
/
Call forwarding enabled.
/
Missed calls.
Alarms enabled.
Keypad locked.
Battery power level.
General profile activated.
Meeting profile activated.
Outdoor profile activated.
Headset connected to the phone.
4
2 Getting Started
Installing SIM Cards and the Battery
You can install two Subscriber Identification Module (SIM) cards
in the phone at the same time. When inser ting a SIM card,
ensure that the golden contact area on the SIM card is facing
downward and that the beveled edge of the SIM card is
properly aligned with that of the SIM card slot.
Removing the Battery and SIM Cards
Before removing the battery and SIM cards, ensure that your
phone is powered off.
5
Installing a microSD Card
Before installing or removing a microSD card, power off
the phone. Once the phone is powered on, it will indicate
whether the microSD card has been installed properly.
You can install a microSD card to expand the memory capacity
of your phone. When inserting the microSD card, ensure that
the golden contact area on the microSD card is facing
downward.
Charging the Battery
To charge the battery:
1. Connect the charger to the phone.
2. Connect the charger to a power socket.
6
3. Wait until the battery is fully charged.
While the battery is charging, the charging icon is animated.
When the charging icon animation stops, the batter y is fully
charged.
4. Disconnect the charger from the power socket and then
from the phone.
Working with the Main Menu
1. In standby mode, press (Menu) to access the
main menu.
2. Use to scroll to the desired submenu, and then
press
3. Press or to scroll to an option, and then press
to access the submenu.
(OK) or to select the option.
4. Press (Back) to return to the previous menu.
To return to the standby mode, press .
Automatically Switching Between Profiles
You can set your phone to activate different profiles at different
times. The phone can automatically switch between profiles up
to three times per day.
1. Select Menu > User profiles > Profile Switch Timing.
7
2. Scroll to a time, and then press (Edit) to select
the profile to be activated at the specified time.
3. Press (Done) to save the settings.
Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock is disabled. Once the phone lock is
enabled, you are required to enter the phone code each time
you power on the phone.
To enable the phone lock:
1. Select Menu > Settings > Security settings > Phone
security > Phone lock.
2. Enter the phone code, and then press (OK).
You can change the default phone code (1234) to any numeric
string of four to eight digits.
To change the phone code:
1. Select Menu > Settings > Security settings > Phone
security > Change password.
2. Enter the old phone code, and then press (OK).
3. Enter the new phone code, and then press (OK).
4. Enter the new phone code again to confirm it.
If you forget the phone code, contact the ser vice provider.
8
Mass Storage
When the phone is connected to a PC through a USB cable, the
options including Mass storage are displayed on the phone
screen.
When you select Mass storage, you can manage the files
stored on the phone and the microSD card.
The microSD card and the phone memory appear as removable
disks on the PC. You can perform the following operations:
1. Double-click a disk to open it.
2. Copy, paste or delete files on a disk.
3. Disconnect the phone from the PC.
z Ensure that you connect and disconnect the USB cable
properly.
z Do not use format command attempts to format the
phone memory on a PC; other wise, it may lead to
permanent damage.
z The USB cable supports both data transfers and
charging functions.
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use. The PIN unblocking key (PUK)
unlocks a blocked PIN. Both the PIN and the PUK are provided
with the SIM card. For details, contact your service provider.
SIM1 and SIM2 PINs are configured separately.
To enable the PIN lock:
9
Loading...
+ 26 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.