registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA , GOODWILL OR ANTICIPATED SAVINGS.
Contents
1 Getting to Know Your Phone ................................................4
Your Phone........................................................................................... 4
Keys and Functions ........................................................................... 5
17 Warnings and Precautions ............................................... 34
iii
1 Getting to Know Your Phone
Your Phone
1 Earpiece 7 # key
2 Screen 8 End/Power key
3 Left soft key 9 Right soft key
4 Call/Answer key 10 OK/Confirm key
5 Number key 11 Navigation keys
6 * key
4
The figure above shows the appearance of your phone
and is provided only for your reference.
Keys and Functions
Press… To…
Make a call from the SIM card in standby mode.
Answer a call.
View call logs of SIM card in standby mode.
Power on or power off the phone (by pressing
and holding the key for about 3s).
End or reject a call.
Return to the standby mode.
Access the main menu in standby mode.
Select a highlighted item.
Access Call history in standby mode.
Return to the previous menu.
Access Service in standby mode.
Confirm a selection.
5
Press… To…
Scroll to the desired icon in main menu (by
pressing
Access the desired shortcut menu by pressing
Access the next menu on a submenu screen (by
pressing
Return to the previous menu on a submenu
screen (by pressing
Enter numbers, letters, and symbols.
Call the voicemail in standby mode (by pressing
–
and holding the 1 key for about 3 seconds).
Select a submenu (by pressing the
corresponding number key).
Enter * (by pressing the key once), + (by pressing
the key twice), P (by pressing the key three
times), and W (by pressing the key four times) in
standby mode.
Display the symbol list in any text entr y mode.
Enter #.
Enable or disable the Silent in standby mode (by
pressing and holding the key for about 3s).
Switch between input methods in text editing
mode.
, , , and ).
, , , or in standby mode.
).
6
).
Screen Icons
Icon Indicates…
Signal strength.
New text messages.
New multimedia messages.
Call forwarding enabled.
Missed calls.
New voicemail messages.
Enabled alarms.
Keypad locked.
Battery power level.
General or Indoor activated.
Meeting profile activated.
Outdoor profile activated.
Headset connected to the phone.
7
2 Getting Started
Installing SIM Cards and the Battery
You can install a Subscriber Identification Module (SIM) card in
the phone. When inserting a SIM card, ensure that the golden
contact area on the SIM card is facing downward and that the
beveled edge of the SIM card is properly aligned with that of
the SIM card slot.
Removing the Battery and the SIM Card
Before removing the battery and the SIM card, ensure that your
phone is powered off.
8
Installing a microSD Card
Before installing or removing a microSD card, power off
the phone. Once the phone is powered on, it will indicate
whether the microSD card has been installed properly.
You can install a microSD card to expand the memory capacity
of your phone. When inserting the microSD card, ensure that
the golden contact area on the microSD card is facing
downward.
Charging the Battery
To charge the battery, do the following:
1. Connect the smaller end of the USB cable to the charger jack
of the phone and the larger end to the charger.
2. Connect the charger to a power socket.
9
3. Wait until the battery is fully charged.
During the charging, the charging icon is displayed in
animation. When the charging icon becomes static, it
indicates that the battery is fully charged.
4. Disconnect the charger from the power socket and then
from the phone.
Working with the Main Menu
1. In standby mode, press (Menu) to access the main
menu.
2. Press to scroll to the desired submenu, and then press
to access the submenu.
3. Press or to scroll to an option, and then press
(OK) or to access the option.
4. Press (Back) to return to the previous menu.
To return to the standby mode, press
.
Reorganizing the Main Menu
You can reorganize the main menu. For example, you can hide
or move a submenu.
10
1. In standby mode, press (Menu) to access the main
menu.
2. Select a submenu, and then press (Options) for the
following options:
Go to: to access the selected submenu.
Hide: to remove the selected submenu from the main menu
screen.
To show the submenu again, select Menu > Settings, press
(Options), select Go to to access the submenu, then
select Phone settings > Mainmenu settings, select the
desired submenu, and then press
Move: to change the location of the selected submenu on
(Show).
the main menu screen.
To move the submenu, scroll to it, select Options > Move,
scroll to the desired location, and then press
Back: to return to the main menu.
(Ok).
Phone Lock
The phone lock protects your phone from unauthorized use. By
default, the phone lock is disabled. Once the phone lock is
enabled, you are required to enter the phone code each time
you power on the phone.
You can change the default phone code (1234) to any numeric
string of four to eight digits.
To change the phone code, do the following:
1. Select Menu > Settings > Security settings > Change
password > Phone password.
2. Enter the old phone code, and then press (Ok).
3. Enter the new phone code, and then press (Ok).
4. Enter the new phone code again to confirm it.
If you forget the phone code, contact the ser vice provider.
Mass Storage
When the phone is connected to a personal computer (PC)
through a USB cable, options such as Mass storage are
displayed on the phone screen.
When you select Mass storage, you can manage the files
stored in the phone memory and on the microSD card.
The microSD card and the phone memor y are displayed as
removable disks on the PC. You can perform the following
operations:
Double-click a disk to open it.
Copy, paste, or delete files on a disk.
Disconnect the phone from the PC.
12
Ensure that you connect and disconnect the USB cable
properly.
Do not run the formatting command on the PC to
format the phone memory. Otherwise, the phone
memory may get permanently damaged.
You can transfer data and charge the battery by
connecting the phone to the PC through the USB
cable.
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use. The PIN unblocking key (PUK)
unlocks the blocked PIN. Both the PIN and the PUK are
provided with the SIM card. For details, contact your service
provider.
To enable the SIM lock function, do the following:
If you enter wrong PINs a specified number of times
consecutively, the phone prompts you to enter the PUK.
If you enter wrong PUKs a specified number of times
consecutively, the SIM card becomes permanently invalid. In
that case, contact your service provider for a new SIM card.
13
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.