registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Contents
1 Getting to Know Your Phone .............................................. 1
Your Phone ........................................................................................1
Keys and Functions .........................................................................2
14 Chat Function ................................................................... 33
15 Warnings and Precautions .............................................. 34
iii
Features marked with "optional" are optional. These
features may vary according to service providers. For
details, contact your service provider.
1
Earpiece
10
Right soft key
2
Screen
11
Navigation keys
1 Getting to Know Your Phone
Your Phone
The following figure shows the appearance of your phone.
1
3
Left soft key
12
Indicator light
4
Call/Answer key
13
Speaker
5
Number keys
14
Camera
6
* key
15
Headset jack
7
# key
16
Charger jack/Universal
serial bus (USB) port
8
Confirm key
17
Flashlight
9
End/Power key
Press…
To…
Make a call.
Answer a call.
View Dialled calls in standby mode.
Power the phone on or off (press and
hold the key for about 3 seconds).
End or reject a call.
Return to standby mode.
Turn the screen on or off in standby
mode.
(Left soft key)
Select the option displayed in the lower
left corner of the screen.
Unlock the keypad (must also press the
right soft key immediately after).
Keys and Functions
2
Press…
To…
(Right soft key)
Select the option displayed in the lower
right corner of the screen.
Confirm a selection.
Scroll through submenus on a menu
screen or options on an option screen.
Scroll through the widgets (press )
on the home screen.
Access the functions assigned to the
navigation keys (press ) in
standby mode.
NOTE
To assign a function to a navigation key,
select Menu > Settings > Phone settings > Shortcuts > Dedicated key.
3
Press…
To…
through
Enter numbers, letters, and symbols.
Call voicemail in standby mode (press
and hold the 1 key for about 3 seconds).
Speed dial phone numbers in standby
mode (set a number key from 2 to 9 as a
speed dial key first and press and hold it
for about 3 seconds.)
Select an option labeled with the
corresponding number.
Turn the flashlight on or off in standby
mode (press and hold the 0 key for
about 3 seconds).
Enter * (press the key once), + (press the
key twice), p (press the key three times),
or w (press the key four times) in
standby mode.
Display the symbol list in editing mode.
Switch between the Meeting profile and
current profile in standby mode (press
and hold the key for about 3 seconds).
Enter #.
Switch between text input modes in
editing mode.
Lock the keypad in standby mode (press
and hold the key for about 3 seconds).
4
Indicator Light
Color
Status
Indicates…
Red
Steady
The battery is charging and the battery
level is low.
Blinking
The battery level is low.
Orange
Steady
The battery is charging and the battery
level is between 15% and 90%.
Green
Steady
The battery is charging and nearly full or
is already full.
Blinking
You have missed calls, unread messages
(SMS, MMS, email, voice mail, and SNS),
missed alarms, or calendar reminders.
Icon
Indicates…
/
Signal strength.
Battery level.
/
New text messages.
New multimedia messages.
/
Call divert enabled.
Screen Icons
5
Icon
Indicates…
Headset connected.
(optional)
Bluetooth turned on.
/
Missed calls.
Alarms enabled.
Keypad locked.
Ring only enabled.
Vib. only enabled.
Vib. and ring enabled.
Vib. then ring enabled.
Silent profile activated.
microSD card inserted.
6
The phone supports two SIM cards, and you can select
Menu > Settings > Dual SIM settings > Dual SIM open
to enable dual-SIM mode. When this mode is enabled, you
can use two SIM cards at one time.
2 Getting Started
Installing the SIM Card and Battery
When installing the subscriber identification module (SIM) card,
ensure that the gold contact area faces down, and that the
beveled edge of the SIM card aligns with that of the SIM card
slot.
Removing the Battery and SIM Card
Before removing the battery and SIM card, ensure that your
phone is powered off.
7
Before installing or removing a microSD card, power the
phone off.
Installing and Removing a microSD Card
You can expand your phone's memory capacity by installing a
microSD card with a capacity of up to 8 GB.
When installing a microSD card, ensure that the gold contact
area faces down, and that the beveled edge of the microSD
card aligns with that of the microSD card slot.
8
Charging the Battery
1. Connect the small end of the USB cable to the phone's
charger jack and the large end to the charger.
2. Connect the charger to a power outlet.
3. Wait until the battery is fully charged.
While the battery is charging, the charging icon blinks. When
the charging icon stops blinking, the battery is fully charged.
4. Unplug the charger from the power outlet and the USB cable
from the phone.
Phone Lock
The phone lock protects your phone from unauthorized use.
The preset password to unlock your phone is 1234. By default,
the phone lock is disabled. Once you enable the phone lock,
you must enter the password each time you power on the
phone.
To enable the phone lock:
9
1. In standby mode, select Menu > Settings > Security
settings > Phonesecurity > Phonelock.
2. Enter the preset password.
To change the preset password:
1. In standby mode, select Menu > Settings > Security
settings > Phone security > Change password.
2. Enter the preset password.
3. Enter a new password.
The password must be a numeric string between four and
eight digits.
4. Enter the new password again to confirm it.
If you forget the password, contact your service provider.
PIN and PUK
The personal identification number (PIN) protects your SIM
card from unauthorized use.
If you incorrectly enter the PIN a specified number of times, the
PIN is blocked and the phone prompts you to enter the PIN
unblocking key (PUK). If this occurs, enter the PUK to unblock
the blocked PIN.
If you incorrectly enter the PUK a specified number of times,
the SIM card will become permanently invalid, and you must
contact your service provider for a new SIM card.
Both the PIN and the PUK are provided with the SIM card. For
details, contact your service provider.
To enable the PIN lock:
10
Loading...
+ 35 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.