Notice
Copyright © 2008 Huawei Technologies
Co., Ltd.
All Rights Reserved
1 No part of this manual may be reproduced or
transmitted in any form or by any means wi thout
prior written consent of Huawei Technologies
Co., Ltd.
2
Trademarks
3 and HUAWEI are trademarks of Huawei
Technologies Co., Ltd. All other trademarks and
trade names mentioned in this manual are the
property of their respective holders.
4
Notice
5 The information in this manual is subject to
change without notice. Every effort has been
made in the preparation of this manual to ensu re
accuracy of the contents, but all statements,
information, and recommendations in this
manual do not constitute the warranty of any
kind, expressed or implied.
Huawei Technologies Co., Ltd.
Address:
6 Administration Building, Huawei Technologies
Co., Ltd., Bantian, Longgang Dist rict, Shenzhen,
P. R. China
Postal Code: 518129
Website: http://www.huawei.com
1
Table of Contents 1
Introduction 1
Packing List..................... ... .. ......................1
Front View ..................................................1
Rear View...................................................2
Installation 3
Installing the Battery...................................3
Installing the UIM Card...............................3
Installing the Power Adapter ......................4
Installing the Indoor Antenna......................4
Connecting the Terminal............................4
Viewing the Signal Strength .......................5
Mounting the FWT. .. ... ........................ .. ... ...6
General Functions 7
Booting the FWT ................ ....................... .7
Making or Answering Calls.........................7
Adjusting the Voice Volume ....... ................7
Advanced Functions 9
Supplementary Service s ........................... .9
Internet Services ............. ... ....................... .9
Facsimile Function ...................................10
Troubleshooting 11
Warnings and Precautions 12
1Table of Contents
1
1
Introduction
1Introduction
Packing List
Note
• The local radio signal strength helps you
select an indoor or outdoor antenna.
• To access the Internet, you need to purchase
the required data suite. For more information,
please consult your local
sales agent.
Front View
Note
The figures are only for your reference, please
refer color and shape to produc
t.
The main ports on the host are described as fol l ows:
The LEDs on the host are described as follows:
Item
Quantity
FWT host 1
Power adapter 1
Phone cable 1
Battery (Rechargeable) 1
Certificate of Quality 1
User Guide 1
NO. Item
1
FWT switch
2 Telephone port 1
3
Telephone port 2
4 Data port
5
DC input
6
Antenna port
7
8
9
10
1
2
3
4
5
6
Rear View
2
Rear View
NO. Item
7
Signal strength indicators: More indicators indicate stronger signal strength.
8
Battery indicator
The battery serves as the only power
supply (without external power adapter):
• In blue: The battery is in full electricity.
• In red: The battery is in medium electricity.
• In red with blinking: The battery needs to
be recharged.
The external power adapter is in use
(with the battery inside):
• In red: The battery is being charged.
• In blue: The battery is fully charged.
9
Power indicator
In blue: The FWT is connected with the
power adapter.
10
Operating status indicator
In blue: The FWT is in work.
No. Item
1
Wall-mounting brackets
2
R-UIM card slot
3
Battery container
4
Battery port
5
Battery container cover
54
32
1
3
2
Installation
2Installation
Note
Before installing or removing the battery , indoor
antenna, or R-UIM card
, you need to swich off
the FWT
and disconnect the FWT from the
power adapter
. To prevent lighting from injuring
human body,
remove the outdoor antenna, too.
Installing the Battery
Note
• When the ambient temperature exceeds the
temparature allowed for charging, the system
will stop charging the battery.
• When the power adapter is in use, the FWT
will automatically ch
arge the battery and stop
charging when the battery is fully charged.
• Remove the battery if the FWT is left unused
for a long period.
• Make sure that the battery has been charged
for more than 8 hours before it supplies
power for the FWT at the first time. The
charging time depends on the environmental
temperature and battery life.
Insert the connection cable of the batte ry int o th e battery port (make sure the battery is corre ctly inserte d),
and then seat the battery in the battery container.
Installing the UIM Card
Note
• Consult the local agent to determine whether
to install the UIM card or not.
• The UIM card and contact point are vulnerable to damage such as scarring or bending,
so you need to insert or remove it with care.
Insert the card into the card slot. Put the side with a
corner cutting backwards and the side with a golden
contact downwards
. Make sure the card is completely
inserted into the slot.
Loading...