Quidway® NetEngine 80 Core Router 100M Ethernet Boards
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://www.huawei.com/products/datacomm/
1
Quidway® NetEngine 80 Core Router
100M Ethernet Boards
Overview
The 100M Ethernet board of the Quidway® NetEngine 80 core router (abbreviated to NE80)
consists of the PIC Fast Ethernet (FE) interface and the Line Processing Unit (LPU).
The LPU implements processing and encapsulation of link layer protocols, data flow classification
and packet filtering, data forwarding and control packet processing. The FE interface implements
Fast Ethernet MAC layer processing functions and Physical Medium Dependent (PMD) sub-layer
functions, and provides such functions as loopback and environment monitoring.
CR-EGFEE
CR-EWFEE
In terms of interface types, the 100M Ethernet board of the NE80 can be categorized into the 100M
Ethernet electrical interface board and the 100M Ethernet optical interface board.
The 100M Ethernet board is mainly applied in Ethernet interconnection, reaching a rate up to 100
Mbps. The electrical interface board is usually used when the transmission distance does not
Quidway® NetEngine 80 Core Router 100M Ethernet Boards
Copyright ©2007 Huawei Technologies Co., Ltd. All Rights Reserved.
http://www.huawei.com/products/datacomm/
2
exceed 100m; the optical interface board is used when the transmission distance ex ceeds 100m. In
addition, different optical modules can be chosen for different transmissi on distances.
Specifications
The NE80 supports two types of 100M Ethernet electrical interface boards (16-port CR-E GFEE and
32-port CR-EWFEE) and two types of 100M Ethernet optical interface boards (8-port CR-E8FF and
16-port CR-EGFF).
Module name Interface type Description
CR-EGFEE RJ45
16-port 100M Ethernet electrical interface board: Maximum
transmission distance: 100m; 10/100M adaptive.
CR-EWFEE RJ45
32-port 100M Ethernet electrical interface board: Maximum
transmission distance: 100 m; 10/100M adaptive.
CR-E8FF LC
8-port 100M Ethernet optical interface board: Different SFP
optical modules can be chosen for different transmission
distances.
CR-EGFF LC
16-port 100M Ethernet optical interface board: Different SFP
optical modules can be chosen for different transmission
distances.
The NE80 supports the following four types of 100M SFP optical modules:
Interface rate 100 Mbps
Maximum transmission distance 2 km 15 km 40 km 80 km
Center wavelength 1310 nm 1310 nm 1310 nm 1550 nm
Min. –19 dBm –15 dBm –5 dBm –5 dBm
Transmitting
optical power
Max. –14 dBm –8 dBm 0 dBm 0 dBm
Receiving sensibility –30 dBm –28 dBm –34 dBm –34 dBm
Overload optical power –14 dBm –7 dBm –9 dBm –10 dBm
Loading...