Huawei CR52-1x10GE-LAN-XFP, CR52-1x10GE-WAN-XFP, CR52-10GE-LAN-10KM, CR52-10GE-LAN-40KM, CR52-10GE-WAN-10KM Specifications

Quidway® NetEngine 80E Core Router 10GE Optical Interface Boards

Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved.

http://www.huawei.com/products/datacomm/

1

Quidway® NetEngine 80E Core Router

10GE Optical Interface Boards

Overview

The Quidway® NetEngine 80E core router (“NE80E” hereinafter) is based on the 10G platform and
can provide 10G wire-speed Ethernet interfaces.

The NE80E 10GE optical interface boards fall into two types: WAN board and LAN board, whose
differences are as follows:

z The WAN board encapsulates Ethernet MAC frames in the SDH/SONET frame structure and

then transmits them via optical fibers. It can be connected to the interface of another WAN
board or the SDH/SONET transmission equipment. It is mainly applied in WAN interconnection
of the Ethernet.

z The LAN board conducts electrical/optical (E/O) conversion of Ethernet MAC frames and then

directly transmits them via optical fibers. It can be connected only to the interface of another
LAN board. It is mainly applied in LAN interconnection of the Ethernet.

CR52-10GE-LAN-10KM

CR52-10GE-WAN-10KM

Quidway® NetEngine 80E Core Router 10GE Optical Interface Boards

Copyright ©2007 Huawei Technologies Co., Ltd. All rights reserved.

http://www.huawei.com/products/datacomm/

2

The 10G LAN board mainly implements 10G LAN processi ng and interface fun ctions. The i nte rface
complies with IEEE 802.3ae, implements MAC and Physical Coding Sublayer (PCS) functions and
provides functions such as loopback, environment monitoring and information query.

The 10G WAN board mainly implements 10G WAN processing and interface functions. The
interface complies with IEEE 802.3ae, implements MAC, PCS and Wide Area Interface Sublayer
(WIS) functions and provides functions such as loopback, environment monitoring and information
query.

Depending on the optical module types supported by the interface boards, the NE80E can provide
two types of modules: pluggable XFP optical module and fixed optical module. During the
networking, you can select 10G LAN boards or 10G WAN boards based on the dif feren ces betwee n
the two types of boards described above and the current condition of the network, and then select
different 10G optical interface boards supporting XFP optical modules or fixed optical modules
according to the transmission distance.

Specifications

Currently, the NE80E provides three types of 10G LAN boards and four types of 10G WAN boards.
Among them, two types support pluggable XFP optical modules while the other five types support
fixed optical modules. The following table list s the specifications:

Module name Interface type Description

CR52-1x10GE-LAN-XFP LC

1-port 10GE LAN optical interface board, which
may have different XFP optical modules
depending on the transmission distance

CR52-10GE-LAN-10KM LC

1-port 10GE LAN optical interface board, whose
center wavelength is 1310nm and maximum
transmission distance is 10km

CR52-10GE-LAN-40KM LC

1-port 10GE LAN optical interface board, whose
center wavelength is 1550nm and maximum
transmission distance is 40km

CR52-1x10GE-WAN-XFP LC

1-port 10GE WAN optical interface board, which
may have different XFP optical modules
depending on the transmission distance

CR52-10GE-WAN-10KM LC

1-port 10GE WAN optical interface board, whose
center wavelength is 1310nm and maximum
transmission distance is 10km