Huawei CP60 User Manual

Package Contains

HUAWEI Wireless Charger x 1
USB Type-C data cable x 1
Charging adapter (model: HW100400E00, HW100400B00, HW100400U00,
HW-100400A00, HW-100400A00) x 1
Quick start guide x 1

Charging Your Wireless Phone

1. Connect the charging adapter to a power outlet and the data cable.

2. Connect the data cable to the wireless charger through the USB Type-C
port.

3. Place the rechargeable area of the phone onto the center surface of the

wireless charger. Charging will begin on contact. (To locate the
rechargeable area of the phone, please refer to the phone's user manual)

• When charging, please position the wireless charger with the logo
facing upwards.

• The wireless charger comes equipped with multiple security

Color

Description

The wireless charger is not connected to a power

wireless charger.

The indicator blinks
white once.

The wireless charger is connected to a power

supply.

The indicator stays

The phone is being charged or is fully charged.

protection features. If you encounter an error during charging, check
and fix any issues that your phone may be experiencing, and then
place your phone back on the wireless charger.

• For best charging performance, it is recommended that you use a
Huawei-approved charger.

Fast Wireless Charging

To begin charging, place your Huawei phone that supports fast wireless
charging onto the wireless charger.
For more details, please refer to the phone's user manual.

• It is recommended that you use the standard charging adapter
(model: HW100400E00, HW100400B00, HW100400U00,
HW-100400A00) that came with the device.

• Make sure the center of the phone is aligned over the center of the
wireless charger. If the phone is not correctly placed, it may not
charge properly.

• If the phone uses a protective case, remove the case and place the
phone correctly onto the wireless charger, as protective cases or
metal contents contained in protective cases may cause the phone
to not charge properly or induce additional heat.

• To keep the wireless charger in good condition, avoid using it inside
a vehicle.

• Avoid placing your phone with bank cards or transportation cards
while charging, as the card chips may affect the charging
mechanism.

Indicator Descriptions

The indicator is off.

supply or the phone has been removed from the

steady white.

The indicator blinks
white quickly.

An error has occurred.

Safety Information

Before you use the device, read the following precautions carefully to ensure
optimal product performance and to avoid danger or violation of laws and
regulations.

• In clinics and hospitals where the use of wireless devices is prohibited,
please comply with the regulations and power off your device.

• Some wireless devices may interfere with implantable medical devices
and other medical equipment, such as pacemakers, cochlear implants,
and hearing aids. Consult the manufacturer of your medical equipment for
more information.

• When using the device, keep it at least 30 cm away from medical devices.

• Keep the device dry. Avoid using the device in dusty, damp, or dirty

environments, as such environments may damage the internal circuitry.

• Do not use the device during thunderstorms, as thunderstorms may
cause equipment malfunction or a shock hazard.

• Please only use the device within its approved operating range of –10°C
to +45°C, and only allow it to be exposed to temperatures within its
approved storage range of –40°C to +70°C. Extreme heat or cold may
damage the device.

• If the charging adapter needs to be replaced, the output of the adapter
must match the specifications of the wireless charger, and must meet the
requirements of Clause 2.5 in GB4943.1.

• If the device needs to be connected to a USB port, ensure that the USB
port is USB-IF certified, and that it complies with the USB-IF standards.

• Keep the device away from excessive heat sources and direct sunlight.
Do not place it on or in heating devices, such as microwave ovens,
stoves, or radiators.

• Do not attempt to disassemble or remanufacture the device, insert foreign
objects into it, or immerse or expose it to water or other liquids. Doing so
may lead to fire, or other hazards.

• Dispose of the device in accordance with local regulations. Do not