No part of this document may be reproduced or transmitted in any
form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
The product described in this manual may include copyrighted
software of Huawei Technologies Co., Ltd and possible licensors.
Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease,
assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by
respective copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and re trademarks or registered trademarks of
Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned
are the property of their respective owners.
1
Notice
Some features of the product and its accessories described herein
rely on the software installed, capacities and settings of local
network, and may not be activated or may be limited by local
network operators or network service providers, thus the
descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or
modify any information or specifications contained in this manual
without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN
NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
2
DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA,
GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws
and regulations and will obtain all necessary governmental permits
and licenses in order to export, re-export or import the product
mentioned in this manual including the software and technical data
therein.
3
2 Getting Started
Your Phone at a Glance
8
1
2
3
4
1Earpiece2Screen
4
7
6
5
3Microphone4Data/Charger Port
123 45678
9
10
11
1213
14
15
5
Volume key
7Camera8Headset jack
6Speaker
Keys and Functions
5
1
Send key
Left soft
2
key
Speaker
3
key
Confirm
4
key
Navigation
5
keys
6
Clear key
Right soft
7
key
• Make or answer a call.
• Access call logs in standby mode.
Select the option displayed in the lower left
corner of the screen.
Press and hold to turn on or off the speaker
mode.
Confirm a selection.
• Scroll through a menu.
• Access the corresponding functions in
standby mode.
• Press to delete an letter in edit mode.
• Press to back to the previous screen.
Select the option displayed in the lower right
corner of the screen.
6
8
9
10
11
12
13
14
End key
Del key
Enter key
Input
Method/
lock key
Sym key
Space key
Caps key
• Power on or power off the phone by pressing
and holding it.
• End or reject a call.
• Return to the standby mode.
• Turn on or off the phone backlight.
Delete a character in editing mode or delete a
selected item in an application.
In text input mode, press this key to enter a
linefeed character.
• In text input mode, press this key to switch
between text input modes.
• In standby mode, press and hold to lock the
keyboard.
In text input mode, press to display the symbol
list.
In text input mode, press to input a space.
In text input mode, press the key to switch
between "abc" mode (lower case), "Abc" mode
(capitalization of the first letter), and "ABC"
mode (upper case).
7
Fn/Vibrate
15
key
• In text input mode, press this key and another
key to enter the upper character on the other
key.
• In text input mode, press the Fn key for two
consecutive times, and then press other keys
to enter upper characters on the keys. Press
the Fn key again to cancel this function.
• In standby mode, press and hold to switch
between Vibration mode and General mode.
8
Inserting the UIM Card and the Battery
2
9
Inserting the microSD Card
Charging the Battery
Before charging the battery with the travel charger, ensure that the
battery is installed in your phone. Do not use a damaged battery or
charger.
1. Connect the charger to a power outlet.
2. Connect the charger to the charger connector of the phone. The
phone begins charging. When the battery icon changes to fully
charged, it indicates that your phone is fully charged.
3. When the phone is fully charged, disconnect the charger from
the phone and then from the power outlet.
10
Status Icons
Signal strengthRoaming
Call in progress
New text message
received
The memory for
multimedia messages
is full
New emergency
message received
Alarm clock enabledBluetooth on
Bluetooth headset
connected
The phone is sending
data through Bluetooth
11
The memory for text
messages is full
New multimedia
message received
New voicemail
message received
microSD card inserted
The phone is receiving
date through Bluetooth
Battery level
Battery charging
Music player playing in
the background
Ringing mode
activated
Vibration mode
activated
Headset connected
Silence mode
activated
Ringing and Vibration
mode activated
12
3 Text Entry
Entering English
When you turn Predictive input on, your phone supports smart text
input methods; otherwise, only traditional text input methods are
supported. To turn on or off Predictive input, select Menu >
1. Based on the sequence of the word, press the key labeled with
the desired letter. Then the phone predicts the commonly used
words according to the numeric sequence of key presses.
2. Select the desired word, and press Confirm key or Space key to
enter the word.
3. Press Sym key to display the symbol list. Then you can select
and enter a symbol.
Note:
The indicator of the current input method is displayed in the upper right
corner of the screen. You can press Input Method/lock key to change the
input method.
13
Traditional English Input Method
The traditional text input method allows you to enter uppercase or
lowercase English letters. You can press the key labeled with the
desired letter.
• Press Sym key to display the symbol list. Then you can select
and enter a symbol.
• Press Space key enter a space.
Entering Spanish
You can enter Spanish words using Spanish text input methods.
The traditional Spanish input method and the smart Spanish input
method are similar to the traditional English input method and the
smart English input method. For details, see "Entering English".
Entering a Digit
• In "123" input mode, press the key labeled with your desired
digit.
• In "Abc" and "En" input mode, press Fn/Vibrate key and then
press a number key.
• In "En" input mode, press a number key and then press
Navigation keys to scroll to the digit and press Confirm key to
enter it.
• In any text input mode, except the "123" input mode, press and
hold a number key to enter the digit.
14
4 Voice Services
Making a Call
Dialing via Keypad
1. In standby mode, enter the phone number.
• To make an international call, press O/+ key to enter the
international long-distance code (+), and then enter the
country code or region code, area code, and phone number in
sequence.
• To dial an extension number, enter the phone number, press
P/@ key to insert P or press T/( key four times consecutively
to insert T, and then enter the extension number.
2. Press Send key to dial the number.
3. Press End key or Select End to end the call.
Dialing via Contacts
Select Menu > Contacts, Select a contact, and press Send key to
make a call.
15
Loading...
+ 40 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.