HUANUO HNDS7 Instruction Manual
Monitor Desk Mount
Instruction Manual
V2.0
Model: HNDS7
English --------------------------------- 01-11
Deutsch --------------------------------- 12-21
Français --------------------------------- 22-31
Español --------------------------------- 32-41
Italiano --------------------------------- 42-51
日本語 --------------------------------- 52-61
Thank you for choosing this HUANUO product! At HUANUO
we strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others at www.huanuoav.com/reviews if you are
satisfied. Should you have any issues, please don't hesitate to
contact us at
Technical Support:
(US/CA)1-800-556-0533 Mon-Fri 8am - 8pm(PST) (USA)
(CAN)
(US/CA)44-808-196-3874 Mon-Fri 2pm - 10pm(UTC)
Website:
www.huanuoav.com
Other Info:
support@huanuoav.com(US/CA)
support_eu@huanuoav.com(DE/UK/FR/IT/ES/NL/SE/AU/PL)
support_jp@huanuoav.com(JP)
IMPORTANT SAFETY INFORMATION
MAX:100
mm/4 in.
• Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer
service at support@huanuoav.com.
• CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We are not liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
• This product contains a high pressure gas spring, fire and percussion prohibited.
Also it is strictly prohibited to dismantle without professionals. Please return to the
manufacturer or hand over to professional agencies if the product is abandoned.
• The desk must be capable of supporting three times the weight of the total load
(the mount, the monitor and all accessories weight). Don't use the product on
particle board.
Weight Restrictions
WARNING
4.4-26.4 lbs.
(2-12 kg)
If your monitor weighs more,
this mount is NOT compatible.
DO NOT exceed the maximum weight indicated.
This mounting system is intended for use only
within the maximum weights indicated. Use with
products heavier than the maximum weights
indicated may result in failure of the mount and its
accessories, causing possible damage and or injury.
Check the VESA Pattern of Your Monitor before You Begin the Installation
MAX:100
mm/4 in.
MAX:100
mm/4 in.
If your monitor VESA is greater than 100x100 mm/4x4 in. or less than
VESA 75x75mm/3x3in., this mount is NOT compatible.
If this desk mount is NOT compatible, please contact customer service at
support@huanuoav.com to find a compatible product.
75 mm ≈ 3 in.
100 mm ≈ 4 in.
Minimum VESA pattern:
75mm/3 in.(W)x75mm/3 in.(H)
01
Product Features
360°
360°
02
Clamp Mounting
Grommet Mounting
TENSION ADJUSTMENT SHOULD BE DONE ONLY
AFTER MOUNT INSTALLATION
Do not adjust tension without monitor.
1. Ensure monitor has been attached to the mount.
2. Read your monitor box or manual to find out monitor net weight.
3. Ensure the net weight of monitor (including accessories) is between
4.4~26.4 Ibs (2-12 kg).
Adjustment Sign
Clockwise to reduce
tension(carry less weight)
Warning!
Counter-clockwise to increase
tension(carry more weight)
03
Loading...