Huafurui Technology CUBOTF1 User Manual

1. Activation

Connect the watch data link, insert to computer port or use charger to activate.

2. Buttons

Functions of the buttons

1

Home

Turn on/turn off

4

adjust

Count down setting：switch to hour/

minute

Press to return to the time

interface

Confirm option

One press to

notification interface

Check lap records

Backlighting

remote control of confirming

picture taking

Home

menu

start
stop

adjust

mode
lap

Smart watch provides five buttons, through which all functions are accessible.

1

3. Browse the main interface

Press “menu”，check the main interface circularly.

4. Introduction of functions.

You are able to check current date, time and the achievements of exercises by time interface.

First line： Date of the day

Second line： Time of the day

Third line： Achievement of the exercises

2

menu

Press to check six main

interfaces circularly

5

mode.lap

Page down

3

start.stop

Start or stop

Decrease the number

Increase the number

Stopwatch mode ： calculating 、

clearing

Page up

Heart rate：switch to step、calorie、

distance、time

Music interface：switch to the

previous song

Music interface：switch to the next

song

1. Shortly press to light up the backlight

2. One press to enter the notification

interface

3. long press 6 seconds to turn on/off

2

Smart watch can store eight latest news records. You can check the details on the notification interface.

5. Heart rate

First line：Time of the day

Second line: current BPM

Third line：steps、calorie、distance、time

Press to go up the page

Press to confirm

Press to go down the page

Press to switch to step, calorie, distance and time

Press to start/stop

Users can start real time heart rate measuring and the whole day heart rate monitoring by clicking “start

to measure “on heart rate interface in the application or pressing the button of start/ stop. It takes

approximately 8-15 seconds to measure the heart rate

Please synchronize the history of heart rate to the application if you need to check the details.

Tips: For all-day wearing when you’re not exercising, your tracker should usually remain a finger’s

width below your wrist bone and lay flat, just same as wearing a watch. CUBOT heart rate tracking

system is designed to be most accurate when the tracker is worn on the top of your wrist.

Exercise may bring you higher heart rate, because blood flow in your arm increases the farther up you

go, moving the tracker up a couple inches can improve the heart rate signal. Also, many exercises such

as push-ups cause you to bend your wrist frequently, which is more likely to interfere with the heart

rate signal if the tracker is lower on your wrist.

3