HUACAM HCV712 User Manual
HUACAM, Inc.
HCV712 User Manual
www.huacam.com
www.huacam.com 1
1. Welcome.................................................................................................................................. 3
1.1 Safety Compliances.................................................................. ....... .... .... ... .... .... .... .... ..4
1.2 Warranty.......................................................................................................................5
2. Product overview...................................................................................................................... 6
2.1 HCV712 Camera.......................................................................................................... 6
2.2 HCV712 Specifications................................................................................................. 7
3. Installation guide...................................................................................................................... 8
3.1 Minimum Recommended Computer System Requirement.......................................... 8
3.2 Configure the HCV712 via Web Browser................................................................... ..8
3.3 HCV712 Home Web Page..........................................................................................12
3.4 HCV712 Configuration & Language Page..................................................................14
4. Basic settings explanation ..................................................................................................... 15
4.1. System Settings Page................................................................................................ 15
4.2. Video & Audio Setting Page ....................................................................................... 16
4.3. CMOS Settings Page .............................................................................. ................... 18
4.4. Networking Setting Page............................................................................................19
4.5. Wi-Fi Settings Page....................................................................................................21
4.6. DDNS Settings Page..................................................................................................22
4.7. SIP Setting Page........................................................................................................ 23
4.8. Status Page................................................................................................................25
5. Advanced settings explanation..............................................................................................26
5.1 User Management Page............................................................................................. 26
5.2 Maintenance Page................................................................ .... ... ........ .... .... ... .... .... ....27
5.3 SMTP Setting Page (Email Alarm)................................... .... .... .... ... .... .... .... ... ........ ....28
5.4 FTP Settings Page (Upload Alarm) ............................................................................ 30
5.5 Alarm Server Settings Page (Upload Alarm to supported VMS or HTTP Server)...... 31
5.6 Motion Detection Configuration Page (Set Alarm)................................... ................... 32
5.7 Motion Detection Time Schedule................................................................................ 33
5.8 Syslog Settings Page (Troubleshooting).................................................................... 34
5.9 Record setting.............................................................................................................35
5.10 Live Storage................................................................................................................ 35
5.11 Software Upgrade......................................................... .... .... .... ... .... .... .... ... .... .... .... ....36
5.12 Software Upgrade via TTFP, HTTP or HTTPS........................................................... 36
5.13 Instructions for local firmware upgrade using TFTP server........................................37
5.14 Configuration File Download ...................................................................................... 38
6. Restore factory default setting............................................................................................... 38
6.1 Factory reset...............................................................................................................38
7. Ip surveilance FAQ................................................................... .............................................. 39
www.huacam.com 2
1. Welcome
Thank you for purchasing Huacam’s HCV712 Outdoor Day/Night High Definition IP Camera,
an innovative powerful weatherproof infrared next genera tion network camera. Its advanced ISP
(Image Sensor Processor) powered with state-of-the-art auto-exposure auto-white-balance
algorithm and a high quality lens, ensures high fidelity video quality that matches digital still
camera color grade in a wide range of light environments. It features cutting edge H.264 real-time
video compression with excellent image clarity and color fid elity, industry leading SIP/VoIP for
video streaming to smartphones and video phones, IR-CUT (mechanical) for day or night mod,
and advanced security protection using strong encryption. The HCV712 can be managed with
HC_Surf, It is fully compliant with ONVIF standard and offers flexible HTTP API and an SDK for
advanced integration.
The HCV712 Outdoor Day/Night IP camera is a new addition to the popular HCV70X serie s
IP surveillance product family. It ensures ease of use, integration and deployment, with
multilingual graphical user interface, provides powerful solution to professional surveillance
applications in outdoor environment.
This manual will help you to learn how to operate and manage your HCV712 Outdoor
Day/Night HD IP camera and ma ke the bes t us e of it.
Package Contents:
1 HCV712 IP Camera X1
2 12V DC Universal Power Adaptor X1
3 Ethernet Cable X1
4. Bracket X3
www.huacam.com 3
1.1 Safety Compliances
These instructions are intended to assist users with the operation of the HCV712 and also to
instruct on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution messages
are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with DC 12V according to the IEC60950-1 standard. Please refer to the technical
specifications for more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or ceiling, make sure that it is firmly attached.
Notice：
Make sure that the power supply voltage is correct before using the camera.
Do not drop the device or expose it to physical shock.
Do not expose the device to temperatures outside the range of -30 oC to +50oC PSU when
the device is in operation.
Do not expose the device to high electromagnetism radiation.
To avoid heat accumulation, make sure that your operating environment has proper
ventilation.
Do not attempt to open, disassemble, or modify the device
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly
according to their average life time. The average life time varies from the differences
between operating environments and usage history. Regular maintenance checks are
recommended for all users. Please contact your dealer for more details.
Cautions Follow these precautions to prevent
potential injury or material damage.
www.huacam.com 4
1.2 Warranty
If you purchased your HCV712 from a reseller, please contact the company where you
purchased the device for replacement, repair or refund.
If you purchased the product directly from Huacam, please contact your Huacam Sales and
Service Representative for a RMA (Return Materials Authorization) number before you return the
product. Huacam reserves the right to remedy warranty policy without prior notification.
Caution:
Changes or modifications to this product not expressly approved by Huacam, or operation of
this product in any way other than as de tailed by this User Manual, could void your manufacturer
warranty. Please do not use a different power adaptor with the HCV712 as it may cause
damage to the products and void the manufacturer warranty.
• This document is subject to change without notice. The latest electronic version of this user
manual is available for download at:
http://www.huacam.com/jdownloads/HD%20IP%20CAMERA%20DOWNLOAD/HCV712
%20user%20manual.pdf
Reproduction or transmittal of the entire or any part, in any form or by any me ans, electronic or
print, for any purpose is not permitted without the express written permission of Huacam
Networks, Inc.
www.huacam.com 5
2. Product overview
2.1 HCV712 Camera
NETWORK : 10/100 Switch LAN port for connecting to Ethernet.
RST: Reset button
USB: Connect to USB Flash Drive or HUACAM usb wi-fi adapter
DC 12V : 12V DC power jack;
www.huacam.com 6
2.2 HCV712 Specifications
Model HCV712
Video Compression H.264, MJPEG
Image Sensor Resolution 1/3”, CMOS, 1280H x720V
Image Sensor Sensitivity Day & night mode, exceptionally low noise levels and low-light
sensitivity. Shutter: 1/10000 – 1/30 second
Focal Length 2.8mm
Aperture F1.8
IR Cut Filter Yes, mechanical
Day & Night Mode Infrared LED covering up to 30m
Minimum Illumination 0.05lux, 0 lux with IR LED on
Responsivity 5.48V/lux-sec (550nm)
Pixel Dynamic Range Wide dynamic range of 120dB with SNRMAX 44dB
Supported Maximum Video
Resolution and Frame Rate
Video Bit Rate 32 Kbps ~ 8 Mbps, multi-rate for preview & recording
Embedded Analytics Motion detection (up to 16 target areas)
Pre-/post-alarm Buffer 8MB
Snapshots Triggered upon events, send via email/FTP
Network Protocol TCP/UDP/IP, RTP/RTCP, RTSP, DHCP, DDNS, HTTP, HTTPS,
Power over Ethernet (PoE) IEEE 802.3af class 0
1280x720 (25fps)
SMTP, FTP, NTP
External Cable Connection Network: RJ45, 10M/100M auto-sensing
Dimensions (D x L) 165mm (L) x 65mm (D)
Weight 0.55kg
Temperature / Humidity -20°C ~ +45°C (14°F ~ 113°F)
Humidity 10–90% RH (non–condensing)
Power Adapter Output: 12VDC/1A; Input: 100–240VAC, 50–60Hz
Casing IP66 compliant weather-proof metal case
Compliance FCC Part 15, Subpart B Class B; CE EN 55022 Class B,
EN61000-3-2, EN 61000-3-3, EN55024, EN60950-1; C-tick
AS/NZS CISPR22, CISPR24; IP66
www.huacam.com 7
3. Installation guide
3.1 Minimum Recommended Computer System Requirement
To install HCV712, you have to have a computer, PC recommend. The minimum
recommended PC system requirement listed below:
• Windows 2000, XP, Windows Vista, Windows 7 (32bit or 64bit)
• CPU: Intel Pentium 4 or higher, 2 GHz
• RAM: 1 GB (4 GB recommended for larger systems)
• Support for DirectX 8.0 and above.
3.2 Configure the HCV712 via Web Browser
The HCV712 has embedded Web server to respond to HTTP GET/POST requests. Embedded
HTML pages allow user to configure the IP camera through Micro soft Internet Explorer (7.0 or
above, 32-bit only) or Firefox (plug-in from Huacam required).
• Download Active-X Control for IE(32bit) from Huacam website:
http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=13&c
atid=1
• Download Firefox Plug-in from Huacam website:
http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=5&cat
id=1
www.huacam.com 8
NOTE:
Google Chrome and Apple Safari support is NOT yet supported and status pending.
Microsoft Internet Explorer 64 -bit support is pending.
Please temporarily disable Antivirus or Int ernet Security Software when download and
install the Huacam Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet
Explorer.
Connect the Camera to network with DHCP server (Recommended)
The HCV712 by default enabled as DHCP client, it will automatically get IP address from the
network with DHCP server running. User can know the IP address assigned to the camera from
DHCP server log or using “SearchTool” from Huacam HC_Surf free VMS software.
1. Download and install the HC_Surf software from Huacam website:
http://www.Huacam.com/products/tools/surveillance/HC_Surf.zip
2. Run the “Search Tool” in the pull down Menu of “Manage Tool” tag
3. Click on button to begin device detection
4. The detected devices will appear in the Output field like below
www.huacam.com 9
5. Double click the column of the detected camera, the browser will automatically open and link to
the device IP and the web configuration page.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page
and start to show the video captured by the camera (by default the camera enabled anonymous
access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
8. Enter the administrator user na me and password to access the Web Configuration Interface,
the default user name and password are both set to admin.
9. In step 6, IE will indicate that “This website wants to install the following add-on:
HCViewerX.cab from Huacam Networks Inc.”, allow the installation.
10. Firefox user need to download and install the p lug-in to see the video, the p lug-in for Firefox
is here:
http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=5&cat
id=1
www.huacam.com 10
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install
the Huacam Firefox plug-in for video or “HCViewerX.cab” for Microsoft Internet Explorer.
Connect to the Camera using Static IP
If no DHCP server in the network, or the camera does not get IP from DHCP server, user can
connect the camera to a computer directly, using static IP to configure the camera.
The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168
1. Connect the computer RJ-45 via an Ethernet cable directly to the IP camera HCV712 .
2. Configure the computer using Static IP: 192.168.1.XXX (1<XXX<255, but NOT 168) and
configure the “Subnet mask” to “255.255.255.0”. Leave the “Default Gateway” to “Blank” like
below:
3. Power on the HCV712 .
4. Start the IE or Firefox browser when the network connection is up.
5. Enter 192.168.1.168 in the address bar of the browser.
6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page
and start to show the video captured by the camera (by default the camera enabled anonymous
www.huacam.com 11
access)
7. Click “Configuration”, the browser will ask credentials to authorize configuration.
8. Enter the administrator user na me and password to access the Web Configuration Interface,
the default user name and password are both set to admin.
9. In step 6, IE will indicate that “This website wants to install the following add-on:
HCViewerX.cab from Huacam Networks Inc.”, allow the installation.
10. Firefox user need to download and install the p lug-in to see the video, the p lug-in for Firefox
is here:
http://www.huacam.com/index.php?option=com_jdownloads&Itemid=103&view=finish&cid=5&cat
id=1
NOTE:
Please temporarily disable Antivirus or Internet Security Software when download and install
the Huacam Firefox plug-in for video or “GSViewerX.cab” for Microsoft Internet Explorer.
3.3 HCV712 Home Web Page
The Home Page of HCV712 shown as Figure 1:
www.huacam.com 12
Figure 1: Home Page of HCV712
1. Control Console: PTZ Console controller for ePTZ function.
2. ZOOM: Zoom in or Zoom out during ePTZ operation.
3. FOCUS: Adjust the focus of image (Not Applicable to HCV712 ).
4. PTZ SPEED/Default Button: Adjust the rotate speed of the control console (Not Applicable);
“D” “Default Button” to reset the video brightness, contrast and saturation value
from (auto or manual) adjusted value to factory default value.
5. BRIGHTNESS: Adjust the image brightness
(will automatic save it unless readjusted)
6. CONTRAST: Adjust the image contrast.
(Same as above, auto save adjusted value)
7. SATURATION: Adjust the image saturation. (Same as above)
8. View Size: Pull down to select between “Window Size” or “Real Size” to display
the embedded video stream at configured video resolution.
9. Configuration Click to enter “Configuration Page” to configure the parameters of
HCV712 (Administration privilege required).
10. Language: Click to switch lan webpage guage.
www.huacam.com 13
Loading...