HTD Panel/Middy Speaker Owner's Manual

Thank you for giving Home Theater Direct the chance to win your business! We are confident you

will find that HTD offers an outstanding combination of performance and value in everything we make. To

ensure you get the most out of your new speakers, please take a moment to read this manual before you

get started. Should you lose this manual, you can always download or print a copy from

www.htd.com

A Few Words About Your New Panel/Middy Speaker and Surround Sound

sound formats, most often

through an analog stereo source, such as a VCR, a 5.1 surround signal is usually available in Dolby

use of the same 5.1

to the back two speakers.

The subwoofer is provided the low frequencies sent to the other channels in a Dolby ProLogic or

full frequency channels: front right, front center, front left, rear (surround) right and rear (surround)

frequencies, a powered subwoofer is necessary to produce the LFE channel.

these speakers will not harm them at moderate volumes. However, if you often play your speakers

Therefore, we recommend that you try both settings to see which works best in your situation and

to your listening taste. Never play a speaker so loud that it distorts. In many receivers, setting a

to the subwoofer connected to the LFE channel. Check the “bass management” section of your

© Home Theater Direct, Inc.

4

w/

grille, no bracket

4

5/8

w/

grille & bracket)

Two flush-mount wall brackets

Two front-firing eliptical ports

with tuned internal channel

tweeter

Two 4” FCD bass drivers

Two 2.5” FCD

4

Optional wall mount brackets
can be used to aim the speaker

- two 4” FCD cone bass drivers with butyl rubber surround

- two 2.5” FCD cone midrange drivers with butyl rubber surround

- one 1” silk dome tweeter, ferro-fluid cooled

- gold-plated 5-way binding posts

- a knife-edge fit and finish cabinet made of CNC carved 5/8” MDF with internal bracing

- a removable shaped wood and cloth grille

- hardware to make mounting to HTD wall-brackets easy

- two internal tuned channels that end in dual front firing eliptical ports

- removeable shaped wood and clothe grille

- two 2.5” FCD cone drivers with butyl rubber surround

- one 1” silk dome tweeter, ferrofluid cooled

- gold-plated 5-way binding posts

- a knife-edge fit and finish 1/2” MDF cabinet with internal bracing

- an internal tuned channel that ends in a front firing, eliptical port

- hardware to make mounting to an optional HTD wall-bracket easy

- removeable shaped wood and cloth grille

tweeter

9/16

tuned internal channel