Safety and
regulatory guide
2 Safety and regulatory guide
Please read before proceeding
THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT
OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE PHONE IS
CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR
ATTEMPT TO DISASSEMBLE THE DEVICE.
Privacy restrictions
Some countries require full disclosure of recorded telephone
conversations, and stipulate that you must inform the person with
whom you are speaking that the conversation is being recorded.
Always obey the relevant laws and regulations of your country
when using the recording feature of your phone.
Disclaimers
ANY WEATHER, STOCK, OR OTHER INFORMATION, DATA, OR
DOCUMENTATION (“ACCESSED INFORMATION”) ARE PROVIDED
“AS IS” AND WITHOUT ANY WARRANTY OR ANY TECHNICAL
SUPPORT. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, HTC AND ITS AFFILIATES expressly disclaim
any and all representations and warranties, arising by law or
otherwise, related to the Accessed Information, including without
limitation any express or implied representation or warranty of
merchantability, fitness for a particular purpose, non-infringement,
quality, accuracy, completeness, effectiveness, reliability, or
usefulness. Without limiting the foregoing, it is further understood
that HTC and its Affiliates are not responsible for any use of the
Accessed Information or the results arising from such use, and
that you use such information at your own risk.
Safety and regulatory guide 3
Limitation of damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN
NO EVENT SHALL HTC OR ITS AFFILIATES BE LIABLE TO YOU,
ANY USER, OR THIRD PARTY FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF
ANY KIND, ARISING IN CONTRACT, TORT, OR OTHERWISE,
INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE,
LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY,
LOSS OF DATA, AND/OR LOSS OF PROFITS, REGARDLESS
OF THE FORESEEABILITY THEREOF OR WHETHER HTC OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. AND IN NO EVENT SHALL THE TOTAL
LIABILITY OF HTC OR ITS AFFILIATES EXCEED THE AMOUNT
RECEIVED FROM YOU, REGARDLESS OF THE LEGAL THEORY
UNDER WHICH THE CAUSE OF ACTION IS BROUGHT. THE
FOREGOING DOES NOT AFFECT ANY STATUTORY RIGHTS
WHICH MAY NOT BE DISCLAIMED.
Important health information and safety
precautions
When using this product, the safety precautions below must be
taken to avoid possible legal liabilities and damages.
Retain and follow all product safety and operating instructions.
Observe all warnings in the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage
to the equipment, observe the following precautions.
Electrical safety
This product is intended for use when supplied with power from
the designated battery or power supply unit. Other usage may be
dangerous and will invalidate any approval given to this product.
Safety precautions for proper grounding installation
CAUTION: Connecting to improperly grounded equipment can
result in an electric shock to your device.
This product is equipped with a USB Cable for connecting
with desktop or notebook computer. Be sure your computer is
properly grounded (earthed) before connecting this product to
the computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
4 Safety and regulatory guide
outlet which is properly installed and grounded in accordance with
all local codes and ordinances.
Safety precautions for power supply unit
Use the correct external power source
A product should be operated only from the type of power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
authorized service provider or local power company. For a
product that operates from battery power or other sources,
refer to the operating instructions that are included with the
product.
This product should be operated only with the following
designated power supply unit(s).
AC adapter:
1. HTC, Model TC P300
2. HTC, Model TC A250, TC B250, TC C250, TC E250, TC U250,
TC K250
Handle battery packs carefully
This product contains a Lithium-ion polymer or Lithium-ion
battery. There is a risk of fire and burns if the battery pack
is handled improperly. Do not attempt to open or service
the battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60˚C
(140˚F).
WARNING: Danger of explosion if battery is incorrectly
replaced. To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external contacts,
expose to temperature above 60° C (140° F), or
dispose of in fire or water. Replace only with specified
batteries. Recycle or dispose of used batteries
according to the local regulations or reference guide
supplied with your product.
NOTE: This product should be operated only with the following
designated Battery Pack(s).
HTC, Model BB99100
•
Safety and regulatory guide 5
Take extra precautions
Keep the battery or device dry and away from water or any
•
liquid as it may cause a short circuit.
Keep metal objects away so they don’t come in contact with
•
the battery or its connectors as it may lead to short circuit
during operation.
The phone should only be connected to products that bear
•
the USB-IF logo or have completed the USB-IF compliance
program.
Do not use a battery that appears damaged, deformed,
•
or discolored, or the one that has any rust on its casing,
overheats, or emits a foul odor.
Always keep the battery out of the reach of babies and small
•
children, to avoid swallowing of the battery. Consult the
doctor immediately if the battery is swallowed.
If the battery leaks:
•
Do not allow the leaking fluid to come in contact with
•
skin or clothing. If already in contact, flush the aected
area immediately with clean water and seek medical
advice.
Do not allow the leaking fluid to come in contact with
•
eyes. If already in contact, DO NOT rub; rinse with clean
water immediately and seek medical advice.
Take extra precautions to keep a leaking battery away
•
from fire as there is a danger of ignition or explosion.
Safety precautions for direct sunlight
Keep this product away from excessive moisture and extreme
temperatures. Do not leave the product or its battery inside a
vehicle or in places where the temperature may exceed 60°C
(140°F), such as on a car dashboard, window sill, or behind a glass
that is exposed to direct sunlight or strong ultraviolet light for
extended periods of time. This may damage the product, overheat
the battery, or pose a risk to the vehicle.
Prevention of hearing loss
CAUTION: Permanent hearing loss may occur if
earphones or headphones are used at high volume
NOTE: For France, Earphone (listed below) for this device
for prolonged periods of time.
have been tested to comply with the Sound Pressure
Level requirement laid down in the applicable NF EN
50332-1:2000 and/or NF EN 50332-2:2003 standards as
required by French Article L. 5232-1.
Earphone, Model RC E160.
•
6 Safety and regulatory guide
Safety in aircraft
Due to the possible interference caused by this product to an
aircraft’s navigation system and its communications network,
using this device’s phone function on board an airplane is against
the law in most countries. If you want to use this device when on
board an aircraft, remember to turn off your phone by switching
to Airplane Mode.
Environment restrictions
Do not use this product in gas stations, fuel depots, chemical
plants or where blasting operations are in progress, or in
potentially explosive atmospheres such as fuelling areas, fuel
storehouses, below deck on boats, chemical plants, fuel or
chemical transfer or storage facilities, and areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders. Please be aware that sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Explosive atmospheres
When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily injury
or even death. Users are advised not to use the equipment at
refueling points such as service or gas stations, and are reminded
of the need to observe restrictions on the use of radio equipment
in fuel depots, chemical plants, or where blasting operations are in
progress. Areas with a potentially explosive atmosphere are often,
but not always, clearly marked. These include fueling areas, below
deck on boats, fuel or chemical transfer or storage facilities, and
areas where the air contains chemicals or particles, such as grain,
dust, or metal powders.
Road safety
Full attention must be given to driving at all times in order to
reduce the risk of an accident. Using a phone while driving
(even with a hands free kit) causes distraction and can lead to
an accident. You must comply with local laws and regulations
restricting the use of wireless devices while driving.
Limiting exposure to radio frequency (RF) fields
For individuals concerned about limiting their exposure to
RF fields, the World Health Organisation (WHO) provides the
following advice:
Safety and regulatory guide 7
Precautionary measures: Present scientific information does not
indicate the need for any special precautions for the use of mobile
phones. If individuals are concerned, they might choose to limit
their own or their children’s RF exposure by limiting the length of
calls, or using ‘hands-free’ devices to keep mobile phones away
from the head and body.
Further information on this subject can be obtained from the
WHO home page http://www.who.int/peh-emf Who Fact sheet
193: June 2000.
Safety precautions for RF exposure
Avoid using your phone near metal structures (for example,
the steel frame of a building).
Avoid using your phone near strong electromagnetic sources,
such as microwave ovens, sound speakers, TV and radio.
Use only original manufacturer-approved accessories, or
accessories that do not contain any metal.
Use of non-original manufacturer-approved accessories may
violate your local RF exposure guidelines and should be
avoided.
Exposure to radio frequency (RF) signals
Your device contains a radio transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate
with your phone, the system handling your call controls the power
level at which your phone transmits.
The radiated output power is far below the international radio
frequency exposure limits. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the
general population. The guidelines are based on the safety
standards previously set by international standards bodies:
American National Standards Institute (ANSI) IEEE. C95.1-
1992
National Council on Radiation Protection and Measurement
(NCRP). Report 86. 1986
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1996
Ministry of Health (Canada), Safety Code 6. The standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
Your mobile device is designed not to exceed the limits for
exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific
8 Safety and regulatory guide
organisation ICNIRP and include safety margins designed to
assure the protection of all persons regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2
W/kg and the highest SAR value for this device when tested at the
ear was 0.752 W/KG@10g*.
As mobile devices offer a range of functions, they can be used
in other positions, such as on the body as described in this user
guide**.
As SAR is measured utilising the device’s highest transmitting
power, the actual SAR of this device while operating is typically
below that indicated above. This is due to automatic changes to
the power level of the device to ensure it only uses the minimum
power required to communicate with the network.
*
The tests are carried out in accordance with IEC standard PT62209-1
**Please see the following section about body worn operation
As with other mobile radio transmitting equipment, users are
advised that for satisfactory operation of the equipment and for
the safety of personnel, it is recommended that no part of the
human body be allowed to come too close to the antenna during
operation of the equipment.
Your device has an internal antenna. Use only the supplied integral
antenna. Use of unauthorised or modified antennas may impair
call quality and damage the phone, causing loss of performance
and SAR levels exceeding the recommended limits as well as result
in non-compliance with local regulatory requirements in your
country.
To assure optimal phone performance and ensure human exposure
to RF energy is within the guidelines set forth in the relevant
standards; always use your device only in its normal-use position.
Do not touch or hold the antenna area unnecessarily when placing
or receiving a phone call. Contact with the antenna area may
impair call quality and cause your device to operate at a higher
power level than needed. Avoiding contact with the antenna area
when the phone is IN USE optimises the antenna performance and
the battery life.
SAR compliance for body-worn operations is restricted to
belt-clips, holsters, or similar accessories that have no metallic
component in the assembly and provides at least 1.5 cm
separation between the device and the user's body.
Failure to observe these instructions could result in your RF
exposure exceeding the relevant guideline limits.
Safety and regulatory guide 9
SAR information
0.752 w/kg@10g (head), 1.12 w/kg @10g (body)*
0.481 w/kg@1g (head), 1.04 w/kg @1g (body)**
* NOTE: The 10g SAR value is measured at GSM/GPRS/EGPRS
900/1800 MHz and WCDMA/HSDPA Band I. The Body
SAR value of 1.12 w/kg @10g has been tested with back
of the device in the holster kept at 1.5 cm away from the
body.
** NOTE: The 1g SAR valu e is measu red at GSM/GPRS/EG PRS
850/1900 MHz and WCDMA/HSDPA Band II & Band V.
The Body SAR value of 1.04 w/kg @1g has been tested
wit h back of the device kept at 1.5cm away from the
body.
Interference in cars
Please note that because of possible interference to electronic
equipment, some vehicle manufacturers forbid the use of mobile
phone in their vehicles unless a handsfree kit with an external
antenna is included in the installation.
Interference with medical equipment functions
This product may cause medical equipment to malfunction. The
use of this device is forbidden in most hospitals and medical
clinics.
If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
Hearing aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider, or call the customer service line to discuss
alternatives.
10 Safety and regulatory guide
Nonionizing radiation
Your device has an internal antenna. This product should be
operated in its normal-use position to ensure the radiative
performance and safety of the interference. As with other
mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of
personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied integral antenna. Use of unauthorized
or modified antennas may impair call quality and damage the
phone, causing loss of performance and SAR levels exceeding the
recommended limits as well as result in non-compliance with local
regulatory requirements in your country.
To assure optimal phone
performance and ensure human
exposure to RF energy is within
the guidelines set forth in the
relevant standards, always use
your device only in its normal-use
position. Contact with the antenna
area may impair call quality and
cause your device to operate
at a higher power level than
needed. Avoiding contact with
the antenna area when the phone
is IN USE optimizes the antenna
performance and the battery life.
Antenna
location
Electrical safety
Accessories
Use only approved accessories.
•
Do not connect with incompatible products or accessories.
•
Take care not to touch or allow metal objects, such as coins or
•
key rings, to contact or short-circuit the battery terminals.
Connection to a car
Seek professional advice when connecting a phone interface to
the vehicle electrical system.
Faulty and damaged products
Do not attempt to disassemble the phone or its accessory.
•
Only qualified personnel must service or repair the phone or
•
its accessory.
Safety and regulatory guide 11
General precautions
You alone are responsible for how you use your phone and any
consequences of its use. You must always switch off your phone
wherever the use of a phone is prohibited. Use of your phone is
subject to safety measures designed to protect users and their
environment.
Avoid applying excessive pressure to the device
Do not apply excessive pressure on the screen and the device
to prevent damaging them and remove the device from your
pants’ pocket before sitting down. It is also recommended that
you store the device in a protective case and only use the device
stylus or your finger when interacting with the touch screen.
Cracked display screens due to improper handling are not
covered by the warranty.
Device getting warm after prolonged use
When using your device for prolonged periods of time, such
as when you’re talking on the phone, charging the battery or
browsing the Web, the device may become warm. In most cases,
this condition is normal and therefore should not be interpreted
as a problem with the device.
Heed service markings
Except as explained elsewhere in the Operating or Service
documentation, do not service any product yourself. Service
needed on components inside the device should be done by an
authorized service technician or provider.
Protect your phone
Always treat your phone and its accessories with care and
•
keep them in a clean and dust-free place.
Do not expose your phone or its accessories to open flames or
•
lit tobacco products.
Do not expose your phone or its accessories to liquid,
•
moisture or high humidity.
Do not drop, throw or try to bend your phone or its
•
accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to
•
clean the device or its accessories.
Do not paint your phone or its accessories.
•
Do not attempt to disassemble your phone or its accessories,
•
only authorised personnel must do so.
Do not expose your phone or its accessories to extreme
•
temperatures, minimum -20 and maximum 50 degrees Celsius.
Please check local regulations for disposal of electronic
•
products.
12 Safety and regulatory guide
Do not carry your phone in your back pocket as it could break
•
when you sit down.
Damage requiring service
Unplug the product from the electrical outlet and refer servicing
to an authorized service technician or provider under the
following conditions:
Liquid has been spilled or an object has fallen into the product.
•
The product has been exposed to rain or water.
•
The product has been dropped or damaged.
•
There are noticeable signs of overheating.
•
The product does not operate normally when you follow the
•
operating instructions.
Avoid hot areas
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
Avoid wet areas
Never use the product in a wet location.
Avoid using your device after a dramatic change in
temperature
When you move your device between environments with very
different temperature and/or humidity ranges, condensation
may form on or within the device. To avoid damaging the device,
allow sufficient time for the moisture to evaporate before using
the device.
NOTICE: When taking the device from low-temperature
conditions into a warmer environment or from hightemperature conditions into a cooler environment,
allow the device to acclimate to room temperature
before turning on power.
Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other
openings in the product. Slots and openings are provided for
ventilation. These openings must not be blocked or covered.
Air bags
Do not place a phone in the area over an air bag or in the air bag
deployment area. Store the phone safely before driving your
vehicle.
Mounting accessories
Do not use the product on an unstable table, cart, stand,
tripod, or bracket. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
Safety and regulatory guide 13
Avoid unstable mounting
Do not place the product with an unstable base.
Use product with approved equipment
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
Adjust the volume
Turn down the volume before using headphones or other audio
devices.
Cleaning
Unplug the product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning, but NEVER use water to clean the LCD screen.
Small children
Do not leave your phone and its accessories within the reach
of small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the phone.
Your phone contains small parts with sharp edges that may
cause an injury or which could become detached and create a
choking hazard.
Repetitive motion injuries
To minimise the risk of RSI, when Texting or playing games with
your phone:
Do not grip the phone too tightly
•
Press the buttons lightly
•
Make use of the special features in the handset which minimise
•
the number of buttons which have to be pressed, such as
message templates and predictive text.
Take lots of breaks to stretch and relax.
•
Operating machinery
Full attention must be given to operating the machinery in order
to reduce the risk of an accident.
Electrostatic discharge (ESD)
Do not touch the SIM card’s metal connectors.
Loud noise
This phone is capable of producing loud noises which may
damage your hearing.
Emergency calls
This phone, like any wireless phone, operates using radio signals,
which cannot guarantee connection in all conditions. Therefore,
you must never rely solely on any wireless phone for emergency
communications.
14 Safety and regulatory guide
Regulatory agency identifications
For regulatory identification purposes, your product is assigned a
model number of PB99200.
To ensure continued reliable and safe operation of your device, use
only the accessories listed below with your PB99200.
The Battery Pack has been assigned a model number of BB99100.
NOTE: This product is intended for use with a certified Class 2
Limited Power Source, rated 5 Volts DC, maximum 1 Amp
power supply unit.
European Union notice
Products with CE marking comply with the R&TTE Directive
(99/5/EC), the EMC Directive (2004/108/EC), and the Low
Voltage Directive (2006/95/EC) issued by the Commission of the
European Community.
Compliance with these directives implies conformity to the
following European Norms (in parentheses are the equivalent
international standards).
ETSI EN301 489-1
•
ETSI EN301 489-3
•
ETSI EN301 489-7
•
ETSI EN301 489-17
•
ETSI EN301 489-24
•
EN300 328
•
EN300 440-2
•
EN301 511
•
EN301 908-1
•
EN301 908-2
•
EN50360/EN62209_1/EN62311
•
EN60950-1 (IEC 60950-1)
•
This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
Safety and regulatory guide 15
Federal Communications Commission notice
This device compl ies with part 15 of the FCC Rules. Operat ion
is subj ect to the followin g two condi tions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been te sted and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
aga ins t har mfu l interfe ren ce in a re sid ent ial installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or TV reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
Consult the dealer or an experienced radio or television
technician for help.
Modifications
The FCC re quires the user to be n otif ied that any change s or
modifications made to the device that are not expressly approved
by HTC Corporation may void the user’s authority to operate the
equipment.
16 Safety and regulatory guide
Telecommunications & Internet Association (TIA)
safety information
Pacemakers
The Health Industry Manufacturers Association recommends that
a minimum separation of 15 cm (6 inches) be maintained between
a handheld wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research by and
recommendations of Wireless Technology Research.
Persons with pacemakers:
Should ALWAYS keep the phone more than
from their pacemaker when the phone is turned ON.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize
the potential for interference. If you have any reason to
suspect that interference is taking place, turn the phone OFF
immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may want to consult
your service provider, or call the customer service line to discuss
alternatives.
WEEE notice
The Directive on Waste Electrical and Electronic Equipment
(WEEE), which entered into force as European law on 13th
February 2003, resulted in a major change in the treatment of
electrical equipment at end-of-life.
The purpose of this Directive is, as a first priority, the prevention of
WEEE, and in addition, to promote the reuse, recycling and other
forms of recovery of such wastes so as to reduce disposal.
15 cm (6 inches)
Safety and regulatory guide 17
The WEEE logo (shown at the left) on the
product or on its box indicates that this product
must not be disposed of or dumped with
your other household waste. You are liable
to dispose of all your electronic or electrical
RoHS compliance
This product is in compliance with Directive 2002/95/EC of the
European Parliament and of the Council of 27 January 2003,
on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS) and its amendments.
waste equipment by relocating over to the
specified collection point for recycling of such
hazardous waste. Isolated collection and proper
recovery of your electronic and electrical waste
equipment at the time of disposal will allow us
to help conserving natural resources. Moreover,
proper recycling of the electronic and electrical
waste equipment will ensure safety of human
health and environment. For more information
about electronic and electrical waste equipment
disposal, recovery, and collection points, please
contact your local city center, household
waste disposal service, shop from where you
purchased the equipment, or manufacturer of
the equipment.
23, Xinghua Rd.,
Taoyuan 330, Taiwan
ֻၲ୯ሞႝηިҽԖϦљ
HTC Corporation
DECLARATION OF CONFORMITY
Intended for use in EU
For the following equipment:
Smartphone
(Product Description)
HTC Desire A8181 (PB99200)
(Product Name)
HTC Corporation
(Manufacturer Name)
No.23, Xinghua Rd., Taoyuan City, Taoyuan County 330, Taiwan
(Manufacturer Address)
is herewith confirmed to comply with the essential requirements of Article 3 of the R&TTE 1999/5/EC
Directive, if used for its intended use and that the following standards has been applied:
1. Health (Article 3.1.a of the R&TTE Directive)
Applied standard(s): EN 50360:2001, EN 62209-1:2006, EN62311:2008, _
2. Safet y (Article 3.1.a of the R&TTE Directive)
Applied standard(s): EN 60950-1:2006+A11:2009
3. Electromagnetic compatibility (Article 3.1.b of the R&TTE Directive)
Applied standard(s): EN 301489-1 v1.8.1:2008, EN 301489-3 v1.4.1:2002, EN 301489-7 v1.3.1:
2005, EN 301489-17 v1.3.2:2008, EN 301489-24 v1.4.1:2007,
4. Efficient use of the radio frequency spectrum ( Article 3.2 of the R&TTE Directive)
Applied standard(s): EN 301511 v9.0.2:2003, EN 301908-1 v3.2.1:2006, EN 301908-2 v3.2.1:2007, EN
300328 v1.7.1: 2006, EN 300 440-1 V1.4.1, EN 300440-2 v1.3.1:2009,
Person responsible for making this declaration:
Philip Blair __________________
(Name and signature)
Project Director ________________________
(Position / Title)
Taiwan 2010/2/22 _
(Place) (Date)
htc.com
91H0xxxx-xxM Rev.A
Loading...