HTC One LRA Quick Start Manual
Your HTC One®
Inserting your microSIM card
If not already inserted, follow the steps below to insert
a microSIM card to connect to a 4G/LTE or GSM
network when roaming.
IMPORTANT: USE A STANDARD MICROSIM ONLY.
Inserting a smaller size SIM (such as nanoSIM with an
adapter or a modified SIM) may damage the card slot or
cause the card to not fit properly.
1. Insert the tip of the SIM
eject tool (or a small bent
paperclip) into the small
hole next to the microSIM
card tray, and push it all
SIM eject tool
cut-o corner
microSIM
gold contacts
microSIM
Want some guidance on using your phone?
Go to www.htc.com/quickstart/. You’ll find tutorials, the
user guide, FAQs, latest news, and more.
the way in until the tray
ejects.
2. Pull the microSIM card
tray out. Place your
microSIM (contacts facing
down and cut-off corner
facing out) onto the tray,
and then insert the tray
back into the slot.
© 2013 HTC Corporation. All rights reserved. HTC, the HTC logo,
and HTC One are trademarks of HTC Corporation. LTE is a trademark
of ETSI. GSM is registered and owned by the GSMA.
htc.com
91H0xxxx-xxM Rev.A
Loading...