THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S
OUTER CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone conversations, and
stipulate that you must inform the person with whom you are speaking that the
conversation is being recorded. Always obey the relevant laws and regulations of your
country when using the recording feature of your device.
, , , ExtUSB, HTC Touch, HTC Care, Touch Dual, and TouchFLO are
trademarks and/or service marks of High Tech Computer Corp.
Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile,
Windows XP, Windows Vista, ActiveSync, Windows Mobile Device Center, Internet
Explorer, Windows Live, MSN, Hotmail, Outlook, Excel, PowerPoint, Word, and Windows
Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
microSD is a trademark of SD Card Association.
Java, J2ME and all other Java-based marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and other countries.
Macromedia, Flash, Macromedia Flash, Macromedia Flash Lite and Reader are
trademarks and/or registered trademarks of Macromedia Netherlands, B.V. or Adobe
Systems Incorporated.
Sprite Backup is a trademark or service mark of Sprite Software.
All other company, product and service names mentioned herein are trademarks,
registered trademarks or service marks of their respective owners.
HTC shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from furnishing this material.
The information is provided “as is” without warranty of any kind and is subject to
change without notice. HTC also reserves the right to revise the content of this
document at any time without prior notice.
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording or storing in a
retrieval system, or translated into any language in any form without prior written
permission of HTC.
Disclaimers
THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED
“AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND
FROM HTC. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
HTC AND ITS AFFILIATES expressly disclaim any and all representations
and warranties, express or implied, arising by law or otherwise, regarding
the Weather Information, Data, Documentation, or any other Products
and services, including without limitation any express or implied warranty
of merchantability, express or implied warranty of fitness for a particular
purpose, non-infringement, quality, accuracy, completeness, effectiveness,
reliability, usefulness, that the Weather Information, Data and/or
Documentation will be error-free, or implied warranties arising from course
of dealing or course of performance.
Without limiting the foregoing, it is further understood that HTC and
its Providers are not responsible for Your use or misuse of the Weather
Information, Data and/or Documentation or the results from such use.
HTC and its Providers make no express or implied warranties, guarantees
or affirmations that weather information will occur or has occurred as
the reports, forecasts, data, or information state, represent or depict and
it shall have no responsibility or liability whatsoever to any person or
entity, parties and non-parties alike, for any inconsistency, inaccuracy, or
omission for weather or events predicted or depicted, reported, occurring
or occurred. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING,
YOU ACKNOWLEDGE THAT THE WEATHER INFORMATION, DATA AND/OR
DOCUMENTATION MAY INCLUDE INACCURACIES AND YOU WILL USE
3
4
COMMON SENSE AND FOLLOW STANDARD SAFETY PRECAUTIONS IN
CONNECTION WITH THE USE OF THE WEATHER INFORMATION, DATA OR
DOCUMENTATION.
Limitation of Damages
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY
FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT
LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF
BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS
ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY,
PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR USE OF
THE WEATHER INFORMATION, DATA OR DOCUMENTATION HEREUNDER
REGARDLESS OF THE FORESEEABILITY THEREOF.
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to avoid possible
legal liabilities and damages.
Retain and follow all product safety and operating instructions. Observe all warnings in
the operating instructions on the product.
To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment,
observe the following precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the designated
battery or power supply unit. Other usage may be dangerous and will invalidate any
approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION: Connecting to an improperly grounded equipment can result in an electric
shock to your device.
This product is equipped with a USB cable for connecting the product to a desktop
or notebook computer. Be sure your computer is properly grounded (earthed) before
connecting the product to the computer. The power supply cord of a desktop or
notebook computer has an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label. If you are not sure of the type of power source
required, consult your authorized service provider or local power company. For a
product that operates from battery power or other sources, refer to the operating
instructions that are included with the product.
• Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns if the battery
pack is handled improperly. Do not attempt to open or service the battery pack.
Do not disassemble, crush, puncture, short external contacts or circuits, dispose of
in fire or water, or expose a battery pack to temperatures higher than 60˚C (140˚F).
WARNING: Danger of explosion if battery is incorrectly replaced. To
reduce risk of fire or burns, do not disassemble, crush, puncture, short
external contacts, expose to temperature above 60°C (140°F), or dispose
of in fire or water. Replace only with specified batteries. Recycle or
dispose of used batteries according to the local regulations or reference
guide supplied with your product.
• Take extra precautions
• Keep the battery or device dry and away from water or any liquid as it may
cause a short circuit.
• Keep metal objects away so they don’t come in contact with the battery or
its connectors as it may lead to short circuit during operation.
• Do not use a battery that appears damaged, deformed, or discolored, or the
one that has any rust on its casing, overheats, or emits a foul odor.
• Always keep the battery out of the reach of babies and small children, to
avoid swallowing of the battery. Consult the doctor immediately if the
battery is swallowed.
• If the battery leaks:
• Do not allow the leaking fluid to come in contact with skin or clothing. If
already in contact, flush the affected area immediately with clean water
and seek medical advice.
5
6
• Do not allow the leaking fluid to come in contact with eyes. If already
in contact, DO NOT rub; rinse with clean water immediately and seek
medical advice.
• Take extra precautions to keep a leaking battery away from fire as there
is a danger of ignition or explosion.
• Communicate the appropriate steps immediately in case a hazard occurs.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures. Do not
leave the product or its battery inside a vehicle or in places where the temperature
may exceed 60°C (140°F), such as on a car dashboard, window sill, or behind a glass
that is exposed to direct sunlight or strong ultraviolet light for extended periods of
time. This may damage the product, overheat the battery, or pose a risk to the vehicle.
PREVENTION OF HEARING LOSS
CAUTION: Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged periods of time.
NOTE: For France, mobile headphones or earphones (listed below) for this device have
been tested to comply with the Sound Pressure Level requirement laid down in the
applicable NF EN 50332-1:2000 and/or NF EN 50332-2:2003 standards as required by
French Article L. 5232-1
• Earphone, manufactured by HTC, Model HS S200
SAFETY IN AIRCRAFT
Due to the possible interference caused by this product to an aircraft’s navigation
system and its communications network, using this device’s phone function on board
an airplane is against the law in most countries. If you want to use this device when on
board an aircraft, remember to turn off the phone by switching to Airplane Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or where blasting
operations are in progress, or in potentially explosive atmospheres such as fuelling
areas, fuel storehouses, below deck on boats, fuel or chemical transfer or storage
facilities, and areas where the air contains chemicals or particles, such as grain, dust, or
metal powders. Please be aware that sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where flammable
materials exist, the product should be turned off and the user should obey all signs
and instructions. Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death. Users are advised not to use the equipment at refueling
points such as service or gas stations, and are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots, chemical plants, or where
blasting operations are in progress. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked. These include fueling areas, below deck on
boats, fuel or chemical transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with handheld
devices, except in the case of emergency. In some countries, using hands-free devices
as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
• Avoid using your device near metal structures (for example, the steel frame of a
building).
• Avoid using your device near strong electromagnetic sources, such as microwave
ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories that do not
contain any metal.
• Use of non-original manufacturer-approved accessories may violate your local RF
exposure guidelines and should be avoided.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this device is
forbidden in most hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of your device
to determine if it is adequately shielded from external RF energy. Your physician may
be able to assist you in obtaining this information.
Turn the phone OFF in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your service provider, or call the customer
service line to discuss alternatives.
7
8
NONIONIZING RADIATION
Your device has an internal antenna. This product should be operated in its normal-use
position to ensure the radiative performance and safety of the interference. As with
other mobile radio transmitting equipment, users are advised that for satisfactory
operation of the equipment and for the safety of personnel, it is recommended that no
part of the human body be allowed to come too close to the antenna during operation
of the equipment.
Use only the supplied integral antenna. Use of unauthorized or modified antennas may
impair call quality and damage the phone, causing loss of performance and SAR levels
exceeding the recommended limits as well as result in non-compliance with local
regulatory requirements in your country.
To assure optimal phone performance and
ensure human exposure to RF energy is
within the guidelines set forth in the relevant
standards, always use your device only in its
normal-use position. Do not touch or hold
the antenna area unnecessarily when placing
or receiving a phone call. Contact with the
antenna area may impair call quality and cause
your device to operate at a higher power
Internal
antenna
location
level than needed. Avoiding contact with
the antenna area when the phone is IN USE
optimizes the antenna performance and the
battery life.
General Precautions
• Heed service markings
Except as explained elsewhere in the Operating or Service documentation, do not
service any product yourself. Service needed on components inside the device
should be done by an authorized service technician or provider.
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an authorized
service technician or provider under the following conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the operating
instructions.
• Avoid hot areas
The product should be placed away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid using your phone after a dramatic change in temperature
When you move your device between environments with very different temperature
and/or humidity ranges, condensation may form on or within the device. To avoid
damaging the device, allow sufficient time for the moisture to evaporate before
using the device.
NOTICE: When taking the device from low-temperature conditions into a warmer
environment or from high-temperature conditions into a cooler environment, allow
the device to acclimate to room temperature before turning on power.
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the product.
Slots and openings are provided for ventilation. These openings must not be blocked
or covered.
• Mounting Accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any
mounting of the product should follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the manufacturer.
• Avoid unstable mounting
Do not place the product with an unstable base.
9
10
• Use product with approved equipment
This product should be used only with personal computers and options identified as
suitable for use with your equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the
LCD screen.
Contents
Chapter 1 Getting Started 15
1.1 Getting to Know Your Device and Accessories ..................................16
1.2 Installing the USIM/SIM Card, Battery, and Storage Card ................ 20
1.3 Starting Up .......................................................................................... 23
1.4 The Today Screen .................................................................................26
1.5 The Start Menu ....................................................................................27
1.6 Quick Menu ..........................................................................................28
Press to turn off the display temporarily. To turn off the power, press and hold for
about 5 seconds. For more information, see “Starting Up” in this chapter.
Lanyard/Strap holder
Left panel
Volume Buttons
• Press the top or bottom
to adjust the speaker
volume.
• During a call, press the top
or bottom to adjust the
earpiece volume.
RESET
Remove the back cover to
see the Reset button. With
the stylus, press the RESET
button to soft-reset your
device.
Sync Connector/Earphone
Jack/AC adapter connector
Connect the supplied
USB cable to synchronize
information or plug in the
AC adapter to recharge
the battery. You can also
connect the supplied USB
stereo headset for hands-free
conversation or for listening
to audio media.
Right panel
Stylus
CAMERA
Press to launch the
Camera. See Chapter
11 for details.
microSD Slot
See "Installing a
Storage Card" for
details.
Front panel
Earpiece
Listen to a phone
call from here.
TALK
Press to answer an
incoming call or dial a
number.
16-key keypad
Slide up the front
panel of the device to
reveal the keypad. Use
to dial phone numbers,
to enter information, or
to open the associated
application.
Notification LEDs
* See description below.
Touch Screen
Getting Started 17
Second Camera
Use this camera for video call
conversations or to take a
self-portrait.
NAVIGATION CONTROL/
ENTER
Press this multi-directional
control up, down, left, or
right to move through menus
and program instructions;
carry out the selection by
pressing the center button.
END
Press to end a call or to
return to the Today screen.
Press and hold to open the
Quick List where you can
choose an action to do.
In the Quick List, touch
Settings
(or tap Start >
Settings > System
Long Press End Key) to set
the behavior when pressing
and holding the END key.
tab >
* Right LED: Shows Green and Amber lights for HSDPA/UMTS/GSM/GPRS/EDGE
Left LED: Shows a flashing Blue light when the Bluetooth system is powered up and
standby, message, and network status as well as for notification and
battery charging status. Shows a flashing red light when the battery level
reaches 5% or lower.
ready to transmit/receive Bluetooth radio signals.
18 Getting Started
Back panel
2 Megapixel
Camera
See Chapter 11
for details.
Back Cover
Remove to install
the SIM card and
battery.
Bottom panel
Speaker
Self-portrait Mirror
Use it when taking selfportrait shots.
Microphone
Accessories
User Ma
n
ual
Read Me First
Screen
Protecto
r
1
2
3
47
5
Getting Started 19
8
6
9
No. AccessoryFunction
1BatteryInsert into the device before turning it on.
2Screen protector Stick on the touch screen to prevent scratches.
3Stereo headsetProvides a volume control slider and a Send/End button.
4AC adapterRecharges the battery.
5USB sync cableConnects your device to a PC and synchronizes data.
6Extra stylusUse to tap items onscreen.
7User manual and
ReadMeFirst
8PouchActs as a protective carrying case for your device.
9Getting Started
and Applications
discs
Press the Send/End button to pick up a call or put a call
on hold; press and hold the button to end the call.
References for using your device.
Source for additional tools and programs.
20 Getting Started
1.2 Installing the USIM/SIM Card, Battery, and
Storage Card
Always turn off your device before installing or removing the USIM/SIM card
or battery.
The USIM/SIM card contains your phone number, service details, and
phonebook/message memory. Your device supports both 1.8V and 3V SIM
cards. Some legacy SIM cards will not function with your device. You should
consult with your service provider for a replacement SIM card. There may be
fees for this service.
Your device contains a rechargeable Li-ion battery. It is designed to use
only manufacturer-specified original batteries and accessories. Battery
performance depends on many factors, including network configuration,
signal strength, the temperature of the environment in which you operate
your device, the features and/or settings you select and use, items attached
to connecting ports, and your voice, data, and other program usage
patterns.
Battery life estimates (approximations):
• Standby time: Up to 180 hours for GSM
Up to
(Subject to network and phone usage)
• Talk time: Up to 5 hours for GSM.
Up to 3 hours for UMTS.
(Subject to network and phone usage)
• Media playback time: Up to 4.95 hours for WMV;
Warning! To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire
or water.
• Do not expose to temperatures above 60oC (140oF).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulations.
250 hours for UMTS
6 hours for WMA.
Up to
Getting Started 21
To remove the back cover
Before installing the USIM/SIM card or battery, you have to remove the back
cover.
1. Make sure your device is turned off.
2. Hold the device securely with the front facing down.
3. With your thumb or finger, lift up the bottom of the back cover.
Lift from here
To install the USIM/SIM card
1. Pull back the red rubber door near the SIM card slot to allow you to
insert the USIM/SIM card.
2. Insert the USIM/SIM card with the gold contacts facing down and the
cut corner on the outside.
Note You can check the SIM card drawing on the SIM card slot to see how to
insert the USIM/SIM card.
3. Secure the USIM/SIM card in place by closing the red rubber door.
Cut corner of SIM card
Red rubber door
22 Getting Started
To install the battery
Install the battery by inserting
it with its exposed copper part
aligned with the protruding copper
conductor on the lower-right side
of the battery compartment.
Insert the bottom side of the
battery first, then gently push the
battery into place.
To replace the back cover
1. Secure the top part of the back
cover by ‘locking’ it into the 3
openings on the device.
2. Press the middle portion of the
back cover.
3. Press the bottom part of the
back cover to lock it into place.
You should hear a click.
To install the microSD™ card
1. Pry open the rubber cover at the
bottom-left side of the device.
2. Insert the microSD card with the
gold contacts facing up.
3. Close the rubber cover.
Tip Press the microSD card to pop it
Copper conductor
2
3
out of the slot.
Getting Started 23
1.3 Starting Up
After inserting your USIM/SIM card and battery, you can now power on and
start using your device.
Turn your device on and off
To turn on the power
Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard
will guide you through the calibration process and the setup of regional
settings, date and time, and password. For more information about touch
screen calibration, see “Calibrate the device”.
To turn off the power
Press and hold the POWER button for a few seconds.
A message will then be displayed, prompting you whether or not to turn off
the device completely.
Auto configure the data connection settings
The first time you power on your device, you will see a notification message
from the Connection Setup on the Today screen.
The Connection Setup can automatically configure your device’s data
connections, such as GPRS, WAP, and MMS, for you so that you do not need
to enter the settings manually onto your device.
24 Getting Started
To automatically configure data connection settings
1. When you see the notification message from the Connection Setup,
tap Yes.
Notes • If you do not see the notification message, tap on the title bar to
• If your USIM/SIM card supports multiple network operator profiles, a
2. Connection Setup then starts to configure your device’s data
connection settings.
3. After the Connection Setup completes the configuration, tap Restart.
For more information about the Connection Setup, see Chapter 10.
Charge the battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you charge the battery. Some batteries
perform best after several full charge/discharge cycles. You can charge the
battery in two ways:
•
Charging the device’s battery by connecting the power adapter.
• Connecting your device to a PC via the provided USB Sync cable.
Note Only the AC adapter and USB cable provided with your device should be
Charging is indicated by a solid amber light on the right LED indicator.
As the battery is being charged while the device’s power is on, a charging
icon (
battery has been fully charged, the right LED becomes green and a full
battery icon (
Warning!• Do not remove the battery from the device while you are charging it
display the message.
message will appear with network profile choices. Select the profile
you want to use and tap
used to charge the device.
OK.
) will be shown on the title bar of the Today screen. After the
) appears on the Today screen’s title bar.
using the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
Getting Started 25
Calibrate the device
Calibrating the touch screen involves tapping the center of a cross with the
stylus as the cross moves around the screen. This process ensures that when
you tap the screen with your stylus, the tapped item is activated.
If your device does not accurately respond to screen taps, follow these steps
to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, then follow the onscreen
instructions to complete the calibration.
Manage screen settings
The device’s display has the following orientation modes: Portrait and
Landscape. To change the orientation, tap Start
Screen, and select the orientation you want.
Tip To quickly change the screen orientation, you can also tap the Rotate Screen
icon in HTC Home’s Launcher. See “HTC Home” later in this chapter for details.
To smooth the edges of screen fonts for many programs, on the ClearType
tab, select the Enable ClearType check box.
To increase the readability or to see more content on the screen, on the
Text Size tab, adjust the text size by moving the slider.
> Settings > System tab >
Switch your device to Sleep mode
Quickly pressing the POWER button turns off the display temporarily and
switches your device to Sleep mode. Sleep mode suspends your device to a
low power state while the display is off in order to save battery power.
Your device also automatically goes into Sleep mode when you leave the
device idle after a certain amount of time.
To specify the timeout period before your device goes into Sleep mode
1. Tap Start > Settings > System tab > Power > Advanced tab.
2. Under On battery power, make sure the Turn off device if not used
for check box is selected.
3. Select the battery timeout period, then tap OK.
26 Getting Started
You will still be able to receive messages and calls while your device is in
Sleep mode. Pressing the POWER button again or new incoming calls/
messages will wake up your device.
1.4 The Today Screen
The Today screen displays important information, such as upcoming
appointments and status indicators. You can touch or tap a section on the
screen to open the associated program.
Connection status
Notification
Open Start Menu
Signal strength
Adjust volume
Battery status
Open Quick Menu
(See “Quick Menu” in this chapter for details)
HTC Home
(See “HTC Home”
in this chapter
for details)
Your upcoming
appointments
• To access the Today screen, tap Start > Today.
• To customize the Today screen display, including the background
image, tap Start
> Settings > Personal tab > Today.
• Touch the area in the Title bar where the icons are to show the
enlarged title bar. In the enlarged Title bar, touch the item to activate
it. The enlarged Title bar is available in all screens.
For more information about customizing the Today screen, see Chapter 4.
Enlarged Title Bar
See third
bulleted item
below
Getting Started 27
1.5 The Start Menu
The Start menu, located at the top left corner of the Today screen, displays a
list of programs. You can start a program by scrolling through the programs
list and then pressing ENTER, or by tapping a program with the stylus.
Open a recently-used program.
Switch to the Today screen.
Open a program.
(The items displayed in the
Start menu can be customized
by tapping Start > Settings > Personal tab > Menus).
Access more programs.
View and change settings.
View Help information for the
current screen.
Tip By default, the Start menu is displayed
in a large size to make it easier for you to
select menu items by simply touching
them with your finger. To display the
Start menu in its normal size, tap Start >
Settings > Personal tab > Large Start
then clear the Enable large Start
Menu
menu check box.”
28 Getting Started
1.6 Quick Menu
The Quick Menu, located at the top right corner of the Today screen, shows
the currently running programs. You can quickly switch between running
programs, stop programs, and see how much program memory is being
used.
Customize how programs
are closed. (See “Using Task
Manager” in Chapter 12.)
Stop all
currently
running
programs.
1.7 QuickTasks
QuickTasks lets you quickly
access frequently-used tasks
by simply opening the front
panel of the device.
The QuickTasks screenn only
opens when you open the
keypad while on the Today
screen.
You can disable the Quick
Tasks by tapping Start >
Settings > System
> Keypad QuickTasks
and clearing the
QuickTasks when keypad is
opened check box.
Note QuickTasks will not open when the screen orientation is in Landscape mode.
tab
Enable
Tap this button to open
the Quick Menu.
Shows the total program
memory usage (in
percentage). Tap to open
Memory settings.
• To switch to a running
program, tap the
program name.
• To stop running a
program, tap
Touch to activate the item
.
Getting Started 29
1.8 HTC Home™
HTC Home™ is a Today screen plug-in that gives you up-to-date local
information at a glance, such as time, day and weather information, and
shows new messages and missed calls. It also has a customizable launcher
where you can add your favorite applications for one-touch access and a
Profile selector where you can quickly change the profile or ring tone of
your device.
HTC Home has four components: Home
At the bottom of HTC Home, there is a toolbar that allows you to switch
between these components.
HTC Home
Toolbar
, Weather, Launcher and Sounds.
Home Weather Launcher
To switch between the different components of HTC Home
Do any of the following:
• Touch the tabs in the toolbar using your finger.
• Tap the tabs in the toolbar using the stylus.
• Use the NAVIGATION CONTROL. If the toolbar is not selected, press
NAVIGATION up/down first to select the toolbar. Press NAVIGATION
left/right to select a tab and then press ENTER.
Sounds
30 Getting Started
Home
Home displays the current day, date and local time. When you have new
incoming messages and calls, it shows you the number of new e-mails,
SMS/MMS messages, and missed calls. If you have set up the alarm, it also
shows the Alarm icon.
Time display.
Touch this display area
when you want to
change the date or time,
or to enable the alarm.
Number of new e-mails.
Touch this icon to view
your e-mails.
Weather
Weather shows you the current weather as well as weather information of
the next four days of the week. The first time you use this feature, you need
to select your city first to get the weather information of your city.
To select your city
2
Date
Alarm icon
Number of missed calls.
Touch this icon to view
the Call History.
Number of new SMS/MMS messages.
Touch this icon to view your SMS and MMS messages.
3
1
4
1. Select the Weather tab ( ).
2. Tap the area that shows Select your city here.
3. On the Select City screen, type in the city name whose weather
information you want to track, then tap
.
Loading...
+ 210 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.