HTC Desire 820
Inserting your nano SIM and microSD cards
IMPORTANT: USE A STANDARD NANO SIM ONLY.
Don’t cut a micro SIM or regular SIM card and insert it
into the nano SIM slot. It’s thicker than the standard nano
SIM card and may get stuck in the slot.
1. Make sure your phone is
off and is facing down.
Open the slot cover with
your thumb or finger.
2. Remove the nano SIM
tray. To remove the tray,
insert your fingertip in the
small opening in the nano
SIM slot and then pull the
tray out.
3. Make sure the nano SIM
tray is facing up. Place
your nano SIM card into
the tray with the gold
nano SIM
gold contacts
4
contacts facing up and
the cut-off corner facing
out.
cut-o
corner
4. To reinsert the tray,
center it first in the nano
SIM slot, and then slide it
in until it locks into place.
5. With your microSD™
card’s gold contacts
5
facing up, insert the
microSD card into the
bottom slot until it clicks
microSD
gold
contacts
into place.
6. To close the slot cover,
slide the plastic hinge
into the side and press
the cover until it clicks
into place.
Want some guidance on using your phone?
On your phone, check out our friendly walkthroughs in
the Tips & Help app. For self-help in troubleshooting
basic problems, you can use the HTC Guide app. Or
go to www.htc.com/support/ to find tutorials, the
user guide, FAQs, latest news, and more.
© 2014 HTC Corporation. All rights reserved.
HTC, the HTC logo, and HTC Desire are trademarks of HTC
Corporation.
microSD is a trademark of SD-3C LLC.
All other company, product and service names mentioned herein
are trademarks, registered trademarks or service marks of their
respective owners.
htc.com
91H0xxxx-xxM Rev.A