HTC Desire 626
___ Inserting your nano SIM and microSD cards
IMPORTANT:
Use a standard nano SIM only.
Don’t cut a micro SIM or regular SIM card and insert it into the
nano SIM slot. It’s thicker than the standard nano SIM card and
may get stuck in the slot.
The back cover and battery are not removable.
Don’t pry the back cover open or remove the battery by force.
This will invalidate the warranty.
1. Make sure your phone is off
1
gold contacts
and is facing
slot cover with your thumb
or finger.
2. Remove the nano SIM tray.
To remove the tray, insert
your fingernail in the small
groove in the tray and then
pull the tray out.
2
Note: Don’t throw away
the tray.
3. Place your nano SIM card
3
into the tray with the gold
contacts facing up and the
cut-off corner facing out.
down
. Open the
nano SIM
cut-o corner
4. When reinserting the nano
SIM tray, make sure it is
facing up so that the nano
4
SIM card doesn’t fall out.
Slide the tray all the way
into the slot.
5. Insert your microSD™ card
into the bottom slot, with
the gold contacts facing up
and towards the slot. Slide
the card all the way in until
5
it clicks into place.
6. To close the slot cover, slide
microSD
gold contacts
the plastic hinge into the
side and press the cover
until it clicks into place.
___ Want some guidance on using your phone?
On your phone, check out our friendly walkthroughs and
self-help in troubleshooting basic problems with the HTC
Help app. From the Home screen, tap , and then find and
tap Help.
Or go to www.htc.com/support/ to find tutorials, the user
guide, FAQs, latest news, and more. Please also read the Safety
and regulatory guide that’s included in the box.
© 2015 HTC Corporation. All rights reserved.
HTC, the HTC logo, HTC Desire, and HTC Sense are trademarks of HTC
Corporation
microSD is a trademark of SD-3C LLC.
All other company, product and service names mentioned herein are
trademarks, registered trademarks or service marks of their respective
owners.
htc.com