Htc Desire 620 User Manual

Your HTC Desire 620 dual sim

Inserting your micro SIM and microSD cards

IMPORTANT: USE A STANDARD MICRO SIM ONLY.

Inserting a smaller size SIM, such as a nano SIM with an
adapter or a modified SIM, may cause the card to not fit
properly or damage the card slot.

1. Make sure your phone is
off and is facing down.
From the USB port,
remove the back cover
with your finger.

2. With the gold contacts
facing down and the cut
off corner facing in, insert
the micro SIM cards into
the slots.

Note: You can insert a 4G LTE
or 3G micro SIM card in either
slot. When you have two
cards inserted, only one card
can connect to the 4G/3G
network. The other card will
connect to the 2G network
only.

SIM 1 connects to the 4G/3G
network by default. You can
also set which card connects
to 4G/3G. For details, see the
user guide.

3. With your microSD™
card’s gold contacts
facing down and the
narrow side facing in,
insert the microSD card
into the slot on the right.

micro SIM

microSD

SIM 1

SIM 2

micro SD

gold contacts

cut-o corner

gold contacts

4

4. Reinsert the battery
into the battery
compartment.

5

5. To replace the back
cover, align the edges
and press down on the
cover from top to bottom
along the edges until it
clicks into place.

Want some guidance on using your phone?

On your phone, check out our friendly walkthroughs in
the Tips & Help app. For self-help in troubleshooting
basic problems, you can use the HTC Guide app. Or
go to www.htc.com/support/ to find tutorials, the
user guide, FAQs, latest news, and more.

© 2014 HTC Corporation. All rights reserved.

HTC, the HTC logo, and HTC Desire are trademarks of HTC
Corporation.

microSD is a trademark of SD-3C LLC.

All other company, product and service names mentioned herein
are trademarks, registered trademarks or service marks of their

respective owners.

Complies with

htc.com

IDA Standards

DB 104368

91H0xxxx-xxM Rev.A