PSC11R-050 power adapter ........................................................................................................... 58
Index .............................................................................................................................................. 59
A26391-K150-Z120-2-7619
Your Pocket LOOX...
... is equipped with the Office applications MS-Word, Excel and Outlook. In Outlook you can not only
receive and send e-mails, you can also manage your appointments and let me remind your of the
things you have to do. You can access names, e-mail addresses and telephone numbers while you
are away from your home or office. You can store notes in written form or verbally as with a dictation
device. Memory cards ensure that even large amounts of data can be carried along reliably.
In the office you can then effortlessly transfer all your data and newly created documents to your
notebook or PC. Install ActiveSync on your notebook or PC, connect the Pocket LOOX to your
notebook or PC and you can synchronise your data.
Why don't you read your favourite book quite comfortably on the display or use the MP3 player while
you're on the road. Insert the memory card of your digital camera in the slot and you can view the
photos you just took on the display.
With Bluetooth, the infrared interface and the integrated Wireless LAN (depending on the model),
you can also connect to other devices in your office and on the go without bothersome cables. For
example, thanks to Bluetooth you can access the Internet without any cables with your Bluetoothcapable mobile phone. With the Pocket Internet Explorer you can visit both web and WAP pages.
The following documentation contains additional information on your Pocket PC and the Windows Mobile operating system:
• in the manuals "Safety and Ergonomics" and ”W arranty"
• in the "Getting Started" manual
• in the help on your Pocket PC.
A26391-K150-Z120-2-7619 1
Information before you start
To make things clear
The following symbols are used in this manual:
!
i
► Text which follows this symbol describes activities that must be performed
This font indicates screen outputs.
This fontindicates programme names, commands, or menu items.
"Quotation marks" indicate names of chapters, data carriers, and terms that are being
Pay particular attention to texts marked with this symbol. Failure to observe
this warning may endanger your life, destroy the system, or lead to loss of
data. Failure to follow the instructions may lead to loss of data, invalidate
your warranty, destroy the Pocket PC, or endanger your life.
Indicates important information which is required to use the system properly.
in the order shown.
emphasised.
A26391-K150-Z120-2-7619 3
Information before you start
Important notes
This chapter contains information on the proper, safe use of your Pocket PC. Please be sure to
observe the following safety precautions to prevent damage to your device, data loss or damage to
your health. The information on saving energy, charging the battery and cleaning your Pocket PC
are very important for proper operation of the Pocket PC. To protect the environment, we urgently
ask that you observe the disposal and recycling information.
Keep this operating manual together with the device. If you pass on the device to a third party,
please also pass on the operating manual.
Safety notes
Pay attention to the information provided in the "Safety and Ergonomics" manual and in
the following safety notes.
!
• Your Pocket PC is a technical device that contains small parts. Therefore, please keep your
Pocket PC out of reach of children under 36 months of age.
• During installation and before operating the device, observe the instructions on environmental
conditions in the "Operating the Pocket PC" and "Technical data" chapter.
• Connect the power adapter plug to the PSC11R-050 power adapter. The power adapter plug
must never be plugged into an electrical outlet without the PSC11R-050 power adapter.
• The included PSC11R-050 power adapter complies with the requirements of the country in
which you purchased the Pocket PC. Make sure the PSC11R-050 power adapter is approved
for the country in which it is used.
• The PSC11R-050 power adapter may only be connected to an electrical outlet when the
Pocket PC or the cradle is connected to the PSC11R-050 power adapter.
• Do not use the PSC11R-050 power adapter for other devices.
• Do not use power adapters which are not specially approved for this Pocket PC.
• You may only operate the Pocket PC with the PSC11R-050 power adapter if the nominal
voltage of the PSC11R-050 power adapter (100 V to 240 V) matches the local mains voltage.
• During transport and on trips, observe the safety precautions in the sections "Transporting
Pocket PC" and "Information on travelling".
This Pocket PC complies with the relevant safety regulations for data processing equipment. If you
have questions as to whether you can set up the optional cradle and the Pocket PC in the intended
environment, please contact your sales point or our hotline/help desk.
4 A26391-K150-Z120-2-7619
Information before you start
Energy saving
Switch off your Pocket PC with the Suspend/Resume button when you don't need it. In the system
settings you can specify after how many minutes the Pocket PC switches off when it is not used
(see the "Configuring the Pocket PC" chapter).
While you are working, and if the ambient light conditions permit, you can reduce the display
brightness or even switch off the display lighting completely. The Pocket PC is equipped with a
transflective display that reflects incident light and enables you to work even under unfavourable
lighting conditions.
Switching off and on of the display lighting can also be specified in the system settings of your
Pocket PC (see the chapter "Configuring the Pocket PC").
If you use the energy saving functions, you can work with the Pocket PC longer before having to
recharge the battery. We particularly recommend that you reduce the display brightness to
effectively save energy and therefore appreciably increase the time you can work with the battery.
Disposal and recycling
Do not throw batteries or accumulators into the household waste.
Our devices are mostly produced of materials that can be turned over for proper recycling. The
device may be taken back after use to be recycled, provided that it is returned in a condition that is
the result of normal use. Any components not reclaimed will be disposed of in an environmentally
acceptable manner. To give back a device please take advantage of your country's disposal and
recycling possibilities.
Further information about country-specific disposal and recycling possibilities can be found on the
following website www.fujitsu-siemens.com/recycling.
If you have any questions on disposal, please contact your local office or our Help Desk.
A26391-K150-Z120-2-7619 5
Information before you start
CE marking
The shipped version of this device complies with the requirements of the EC Guidelines
73/23/EEC.
This equipment complies with the requirements of Directive 1999/5/EC of the European Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and
mutual recognition of conformity.
Bluetooth is approved for use in Austria, Belgium, Denmark, Germany, Finland, France, Greece,
Great Britain, Ireland, Iceland, Italy, Liechtenstein, Luxembourg, the Netherlands, Norway, Portugal,
Sweden, Switzerland and Spain.
To all customers:
If you are not sure whether the use of Bluetooth is permitted in your country, please contact the
corresponding supervisory authorities.
The user is responsible for radio interference that may occur when operating the device.
!
European Union Notice
0984
Products bearing the CE marking comply with the R&TTE Directive (1999/5/EC), EMC Directive
(89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by the Commission of the
European Community. CE compliance of this computer is valid only if powered with an Fujitsu
Siemens Computers-provided CE marked AC Adapter.
Compliance with these directives implies conformity to the following European Norms (in
parentheses are the equivalent international standards and regulations):
• EN 55022 (CISPR 22) — Electromagnetic Interference
• EN61000-3-2 (IEC61000-3-2) — Power Line Harmonics
• EN61000-3-3 (IEC61000-3-3) — Power Line Flicker
• EN 60950 (IEC 60950) — Product Safety
• ETS 300 328-2 — Technical requirements for 2.4 GHz radio equipment
• EN 301 489-1, -17 — General EMC requirements for radio equipment
The IEEE 802.11b wireless LAN and Bluetooth functionality of this product may be used in the
following EU, EU candidate, and EFTA countries: Austria, Belgium, Denmark, Estonia, Finland,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Liechtenstein, Lithuania, Luxemburg, Malta,
Netherlands, Norway, Portugal, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.
For IEEE 802.11b wireless LAN operation of this product, only a limited band is available in France
(Channels 10, 11, 12, and 13 only). l'Autorité de régulation des télécommunications (ART) has
special regulations for hotspots allowing other channels, too.
Please check with ART (http://www.art-telecom.fr) on this for local rulings and for authorization.
6 A26391-K150-Z120-2-7619
Information before you start
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or an experienced radio or television technician for help
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that
are not expressly approved by the responsible party for compliance may void the authority to
operate the equipment.
Declaration of Conformity for products marked with the FCC logo — United
States only
Check whether your package is complete using the illustration on the inner cover and the following
list.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
• For questions regarding your product, contact:
Please find the contact information for your country on the attached warranty flyer.
• For questions regarding this FCC declaration, contact:
Fujitsu Siemens Computers Inc.
598 Gibraltar Drive
Milpitas, CA 95035-6315
U.S.A.
To identify this product, refer to the Part, Series, or Model number found on the product.
A26391-K150-Z120-2-7619 7
Information before you start
Battery storage
Store the Pocket PC in a fully charged state in a dry environment. If you store the Pocket PC for up
to a month, the storage temperature should be between -20°C and +60°C. If you store the Pocket
PC for up to three months, the storage temperature should be between -20°C and +45°C. The lower
the temperature at which the batteries are stored, the lower is the rate of self-discharge. Avoid
leaving your Pocket PC lying in direct sunlight in a car.
Please note that batteries discharge themselves over time. Therefore, recharge the battery of your
Pocket PC at regular intervals during the storage period.
Cleaning Pocket PC
► Switch the Pocket PC off.
► Pull the PSC11R-050 power adapter out of the electrical outlet.
Wipe the casing with a dry cloth.
If it is very dirty, you can clean the casing and the display with a damp cloth.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
!
Please ensure that no liquid enters the Pocket PC.
8 A26391-K150-Z120-2-7619
Software overview
In the following table you see which programs are already installed on your Pocket PC and where
you can find information on the use and operation of these programs.
Software Used for Operating information
PocketWord For word processing Help file on Pocket PC
PocketExel For spread-sheet functions Help file on Pocket PC
PocketOutlook Contacts/calendar//things to do Help file on Pocket PC
ActiveSync 3,7 For data synchronisation Help file on the notebook or
Pocket Internet Explorer Browser for websites and WAP sites Help file on Pocket PC
Microsoft Reader 2.0 for
Windows Mobile
Microsoft Windows Media
Player 9 for Windows
Mobile
MSN Messenger For online communication Help file on Pocket PC
FSC SpeedMenu For fast file and program
Bluetooth connection
software
FSC Backup Partial and full data backup on
For reading eBooks Help file on Pocket PC
For playing audio and video files Help file on Pocket PC
management; supports one-hand
operation
For Bluetooth configuration and
operation
external storage modules or in
LOOXstore (if available)
PC on which you installed
ActiveSync.
EasyGuide on the Microsoft
Companion CD and help file
on Pocket PC
Help file on Pocket PC
Help file on Pocket PC
A26391-K150-Z120-2-7619 9
Operating the Pocket PC
This chapter describes the operating elements of your Pocket PC and how you
• put the Pocket PC into operation the first time
• switch the Pocket PC on and off
• operate the Pocket PC with the stylus
• operate the Pocket PC with the navigation key
• switch the display lighting on and off
• make sound recordings
• use the optional cradle
• synchronise data
• use memory cards
Please take note of the information in the "Important notes" chapter.
In just a few steps your Pocket PC is ready to use the first time.
• Insert battery
• Connect PSC11R-050 power adapter
• Install ActiveSync on PC/notebook and carry out first data synchronisation
• Start Pocket PC for the first time
You will learn more about the individual steps in the following sections. The explanations in the text
refer to several positions on the illustrations of the inner cover.
Please follow the sequence of these steps! Before the first data synchronisation
between your Pocket PC and your PC/notebook, you must install the program ActiveSync
i
on your PC/notebook.
A26391-K150-Z120-2-7619 13
Operating the Pocket PC
Inserting battery
1
2
3
5
6
4
► Slide the locking device (1) in the direction of the arrow and hold it pressed.
► Pull the cover (2) off the Pocket PC in the direction of the arrow.
► Lay the battery in the battery compartment (3 + 4). Watch the contact connections.
► Slide the locking device (5) in the direction of the arrow and hold it pressed.
► Slide the cover (6) in the direction of the arrow as far as it will go.
The battery is not charged at the time of delivery. Therefore, charge the battery for
12 hours before the first mobile use (see "Connecting PSC11R-050 power adapter"
i
section).
When you replace the battery, an internal backup battery prevents your data from being
lost. This backup battery can buffer the data for up to 30 minutes. The buffer time is
dependent on the charging level of the backup battery.
14 A26391-K150-Z120-2-7619
Operating the Pocket PC
Connecting PSC11R-050 power adapter
You can connect the PSC11R-050 power adapter to the Pocket PC (for instructions on how to
connect the power adapter to the optional cradle, please read the section "Using optional cradle").
Connect the power adapter plug to the PSC11R-050 power adapter. The power adapter
plug must never be plugged into an electrical outlet without the PSC11R-050 power
!
adapter.
The included PSC11R-050 power adapter complies with the requirements of the country
in which you purchased the Pocket PC. Make sure the PSC11R-050 power adapter is
approved for the country in which it is used.
The PSC11R-050 power adapter may only be connected to an electrical outlet when the
Pocket PC or the cradle is connected to the PSC11R-050 power adapter.
Do not use the PSC11R-050 power adapter for other devices.
Do not use power adapters which are not specially approved for this Pocket PC.
► Slide the suitable power adapter plug into the PSC11R-050 power adapter in the direction of
the arrow until it engages.
A26391-K150-Z120-2-7619 15
Operating the Pocket PC
3
21
► Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC.
► Connect the power adapter cable (2) to the DC socket of the ActiveSync cable.
► Connect the PSC11R-050 power adapter (3) to an electrical outlet.
The installed battery will now be charged. The power-on indicator (number 10 in the section
"Overview of operating elements and connections") flashes green.
The charging time is approx. 4 hours. When the battery is fully charged, the power-on indicator lights
continuously green.
Please note that:
i
• The battery is not charged at the time of delivery. Therefore, charge the battery for
12 hours before the first mobile use.
• Do not connect your Pocket PC to your computer (PC/notebook) yet. Before the first
data synchronisation between your Pocket PC and your PC/notebook, you must
install the program ActiveSync on your PC/notebook.
Installing ActiveSync on your PC/notebook
The data synchronisation helps you always keep your data on your Pocket PC and your
PC/notebook up to date when you work alternately with your PC/notebook and your Pocket PC. You
can transfer data you require when you're on the go from your PC/notebook to the Pocket PC using
the data synchronisation feature. In the same way, you can copy the latest results of your work from
the Pocket PC to your PC/notebook.
The ActiveSync cable and the ActiveSync software are provided for data synchronisation. ActiveSync
is already installed on your Pocket PC. You need only install ActiveSync on your PC or notebook.
The ActiveSync program and the required drivers are contained on the Microsoft Companion CD.
► Insert the Microsoft Companion CD in the optical drive of your PC/notebook.
The installation program of ActiveSync will start.
16 A26391-K150-Z120-2-7619
Operating the Pocket PC
If the installation program of ActiveSync does not start automatically, you must double-click on the file
Setup.exe of ActiveSync.
► Click on Start here and follow the instructions on the screen.
► Prepare the Pocket PC as described in the section "Starting Pocket PC the first time".
During the installation the software attempts to establish a connection to the Pocket PC.
If you have not yet installed Outlook 2002 on your PC/notebook, you must install it on your
PC/notebook before the first data synchronisation between your Pocket PC and your
i
PC/notebook. Outlook 2002 is provided on the included Microsoft Companion CD.
1
► Connect the ActiveSync cable to a USB port (1) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your
Pocket PC and your PC/notebook will be established. The ActiveSync Setup Wizard will help you do
this.
First data synchronisation between the Pocket PC and the
PC/notebook
After you have specified the desired and required settings for the synchronisation in the Wizard, the
first synchronisation starts automatically.
ActiveSync is now installed on your PC/notebook and your Outlook data are synchronized with your
new Pocket PC.
A26391-K150-Z120-2-7619 17
Operating the Pocket PC
Starting Pocket PC the first time
12
► Press the Suspend/Resume button (1) to switch on the Pocket PC.
► Pull out the pen (2) in the direction of the arrow.
Adjusting touchscreen
The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC
reacts correctly when touched with the stylus, you will be asked to align the touchscreen after the
initial start-up.
Touch the centre of the cross hairs that appears on the display with the stylus. This procedure must
be repeated several times, whereby the cross hairs appear at different locations on the display each
time. Follow the instructions on the display.
Becoming familiar with basic operation
Next the operating system provides a brief introduction to the operation of the Pocket PC with the
stylus after the initial start-up.
► Follow the instructions on the display.
Today screen
Following the introduction the Today screen appears. The Today screen always appears when you
switch on the Pocket PC again after you have not used it for four or more hours. The Today screen
shows all important current information at a glance. From this screen you have access to all
programs and to the system settings.
To optimize the responsiveness of the touchscreen when touched with the stylus, you can
also always realign the touchscreen (under Start - Settings - System).
i
Please also use the help function that is available on your Pocket PC if you want to know
more about operating the programs contained in the operating system.
i
18 A26391-K150-Z120-2-7619
Loading...
+ 59 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.