HTC CARA100 Users Manual
HTC StereoClip (AUX)
http://www.htc.com/www/support/warranty.html
CAR A100
User Guide
Overview
Thank you for purchasing the HTC StereoClip (AUX). The HTC
StereoClip (AUX) is an accessory that Bluetooth enables your car audio
system. This User Guide will get you started and ready to make the most
of your HTC StereoClip (AUX).
About your HTC StereoClip (AUX)
HTC StereoClip (AUX) cap
3.5mm audio jack
Control button
HTC StereoClip (AUX)
English
LED indicator
The Control button on HTC StereoClip (AUX) performs different
functions depending on how long you press it.
- Press: Less than 4 seconds
- Press and hold: more than 4 seconds
1
USB port
English
Features
• Bluetooth 2.1 + EDR (Minimum)
• Supports Advanced Audio Distribution Prole (A2DP)
• Supports CSR aptX™ codec
• Stereo output to 3.5mm audio jack
• Bluetooth Simple Secure Pairing
• Auto-pairing with selected HTC phones or tablets
• Automatic power off to conserve battery power
• Battery capacity: 85mAh
- Play time: up to 5 hrs
- Standby: 120 hrs
Getting Started
Charging your HTC StereoClip (AUX)
Before using HTC StereoClip (AUX) for the rst time, you need
to charge it using the micro-USB cable. Normal charge takes
approximately 2 hours.
1. Connect one end of the USB cable to the
USB port of HTC StereoClip (AUX).
2. Connect the other end of the USB cable to a
computer or a power adaptor.
Note:
When the battery needs charging, the Red LED blinks slowly. If you
do not charge HTC StereoClip (AUX), it turns itself off before battery
depletes.
2
Turning the HTC StereoClip (AUX) on and off
• To turn on HTC StereoClip (AUX), press the Control button. The
Green LED lights for 1 second and then goes off.
• To turn off HTC StereoClip (AUX), press and hold the Control button.
The Red LED lights for 1 second and then goes off.
Pairing with mobile devices
HTC StereoClip (AUX) needs to be paired with your phone or tablet
before it can be used. When the devices are successfully paired and
active, the Green LED blinks 3 times in succession every 5 seconds.
Note:
HTC StereoClip (AUX) also supports “auto-pairing” with selected HTC
phones which support HTC Car.
1. Turn on the Bluetooth feature on
your mobile device.
2. Press and hold the Control button
to turn HTC StereoClip (AUX) on.
The Green LED blinks quickly,
indicating HTC StereoClip (AUX) is
in pairing mode.
3. Set your mobile device to search for Bluetooth
devices, and select “HTC Car A100” from the search
results.
Note:
HTC StereoClip (AUX) can store pairing information of up to eight
devices.
3
English
Loading...