HTC BL R120, Mini + User Guide
HTC Mini+
BL R120
User Guide
http://www.htc.com/support
Trademarks and copyrights
© 2013 HTC Corporation. All rights reserved. HTC and the
HTC logo are trademarks of HTC Corporation.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
All other trademarks included herein are the property of
their respective owners.
HTC shall not be liable for technical or editorial errors
or omissions contained herein, nor for incidental or
consequential damages resulting from furnishing this
material. The information is provided “as is” without
warranty of any kind and is subject to change without
notice. HTC also reserves the right to revise the content of
this document at any time without prior notice.
No part of this document may be reproduced or
transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording or storing
in a retrieval system, or translated into any language in any
form without prior written permission of HTC.
About your HTC Mini+
Your HTC Mini+ is a convenient way for you to remotely
control your phone while you’re charging it. You can handle
incoming calls, make calls, read text messages and more.
earpiece end call/back
IR keypad
laser pointer key lock
LED USB connector
volume mic
navigation/enter
call
lanyard loop
3
English
English
Using the navigation controls
The navigation controls on the HTC Mini+
are used to browse and select items in
the menu. They are also used to remotely
control your phone’s camera, media
player, and more.
The navigation controls consist of a
4-way navigation ring (up, down, left,
and right) and an enter button.
4-way navigation
Charging your HTC Mini+
Before using your HTC Mini+ for the first time, you should
give it a full charge. Charging time depends on the power
source. Use an ocial HTC AC adaptor for a faster charging
time.
To charge your HTC Mini+, connect one end of the USB
cable to the USB connector on the HTC Mini+, and the
other end to the power source.
Red LED charging
Green LED fully charged
Important:
The HTC Mini+ will not charge if its battery temperature is greater than
50°C or less than 0°C.
Turning your HTC Mini+ on or o
To turn your HTC Mini+ on, short press .
To turn your HTC Mini+ o, press and hold .
Pairing your HTC Mini+ via NFC
1. Turn your HTC Mini+ on, then press and hold .
2. On your phone, turn NFC on.
3. Place your HTC Mini+ back-to-back with your phone.
4. Tap Yes when you’re prompted to pair your HTC Mini+.
enter
4
Pairing your HTC Mini+ via Bluetooth
1. Turn your HTC Mini+ on. Then press and hold to make
your HTC Mini+ discoverable.
2. On your phone, turn
Bluetooth to see the list of available Bluetooth devices.
3. Tap HTC Mini+ to pair.
When HTC Mini+ has connected to your phone, you’ll see
in the status bar on your HTC Mini+ and the notification
icon on your phone.
You only need to pair HTC Mini+ to your phone once. The
next time you turn on your HTC Mini+, it automatically
reconnects to your phone.
Bluetooth
® on and then tap
Pairing your HTC Mini+ with your PC
Your HTC Mini+ can also be paired to a Windows® 8 (or 7)
PC that has Bluetooth® turned on.
1. On your PC, turn Bluetooth on.
2. Turn your HTC Mini+ on. Then press and hold to make
your HTC Mini+ discoverable.
3. On your PC, add a new Bluetooth device.
• In Windows 8, go to PC settings > Devices, and then
click Add a device.
• In Windows 7, open the Control Panel. Under
Hardware and Sound, click Add a device.
4. Select HTC Mini+ (then click Next in Windows 7).
5. Install HTC Mini+ Remote, and then start it.
6. Right-click the system tray icon , and then click
Connect.
Note:
You can download HTC Mini+ Remote from www.htc.com/support.
Disconnecting your HTC Mini+
If you want to temporarily disconnect your HTC Mini+, tap
HTC Mini+ in your phone’s Notification panel.
English
5
Loading...