HSMC H7812AE, H7812BE Datasheet

HI-SINCERITY
MICROELECTRONICS CORP.
H7812AE H7812BE
Description
Spec. No. : HE200107 Issued Date : 1998.07.01 Revised Date : 2001.12.17 Page No. : 1/3
The H7812_E series of three-terminal positive regulators are availa-
TO-220
ble in the TO-220AB package. These regulators can provide local on
-card regulation, eliminating the distribution problems associated with single point regulation. Each employs internal current limiting, thermal shut-down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. H7812_E is characterized for operation from 0°C to +125°C, and if operating temperature is always high, please refer to the power dissipation curve.
Absolute Maximum Ratings (Ta=25°C)
Input V oltage....................................................................................................................... 35 V
Total Power Dissipation..................................................................................... Internally limited
Operating Temperature Range .......................................................................... 0 °C to +125 °C
Maximum Junction Temperature...................................................................................... 125 °C
Storage Temperature Range........................................................................... -55 °C to +150 °C
Lead Temperature (Soldering 10S).................................................................................. 230 °C
Schematic DiagramTypical Application
Input
VoutVin
H7812_E
6.3V
C1 C2
30K
Note:
C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop.
H7812AE, H7812BE HSMC Product Specification
3.4K
200
1.9K
26
1.2
12.1K
10K
1K
200
20pF
4K
1K
2K
0.3
Output
VREF
26
4K
GND
HI-SINCERITY
MICROELECTRONICS CORP.
Electrical Characteristics
Vin=19V, Io=500mA, 0°C≤Tj≤125°C (unless otherwise noted)
Spec. No. : HE200107 Issued Date : 1998.07.01 Revised Date : 2001.12.17 Page No. : 2/3
Symbol Parameter Conditions
Vo Output Voltage
Tj=25°C
14.5VVin27V
Vo
Vo
Line Regulation
Load Regulation
IQ Quiescent Current
IQ
Quiescent Current Change
Vn Output Noise Voltage RR Ripple Rejection VD Dropout Voltage
Isc Short Circuit Current
Ipk Peak Output Current
Vo / ∆T
Average Tc of Vout
Tj=25°C, 14.5VVin30V Tj=25°C, 16VVin22V 5mAIo1.5A 250mAIo750mA Io1A, Tj=25°C 5mAIo1A
14.5VVin30V Ta=25°C, 10Hz≤f≤100KHz 15VVin25V, f=120Hz Tj=25°C, Io=1A Tj=25°C Tj=25°C 0°CTj+125°C, Io=5mA
Symbol Parameter Conditions
Vo Output Voltage
Tj=25°C
14.5VVin27V
Vo
Vo
Line Regulation
Load Regulation
IQ Quiescent Current
IQ
Quiescent Current Change
Vn Output Noise Voltage RR Ripple Rejection VD Dropout Voltage
Isc Short Circuit Current Ipk Peak Output Current
Vo / ∆T
Average Tc of Vout
Tj=25°C, 14.5VVin30V Tj=25°C, 16VVin22V 5mAIo1.5A 250mAIo750mA Io1A, Tj=25°C 5mAIo1A
14.5VVin30V Ta=25°C, 10Hz≤f≤100KHz 15VVin25V, f=120Hz Tj=25°C, Io=1A Tj=25°C Tj=25°C 0°CTj+125°C, Io=5mA
H7812AE
Min Typ Max
11.64 12 12.36
11.64 12 12.36
- 20 120
-1660
- - 120
--60
Units
V
mV
mV
-5.58 mA
--0.5
--1.3
mA
- - 200 uV
-68- dB
-2- V
-1.5- A
1.7 - - A
--0.8-
H7812BE
Min Typ Max
11.5 12 12.5
11.4 12 12.6
- 44 240
- 16 120
- 45 240
- 16 120
mV/°C
Units
V
mV
mV
-5.58 mA
--0.5
--1.3
mA
- - 300 uV
62 73 - dB
-2.5- V
-1.5- A
1.7 - - A
--0.8-
mV/°C
H7812AE, H7812BE HSMC Product Specification
Loading...
+ 1 hidden pages