HSI HuddleCam-HD 3X, HuddleCam-HD 10X User Manual
Precautions………………………………………………………………………………………….
Safety Tips…………………………………………………………………………………………….
• Please read this manual carefully before using the camera.
• Avoid damage from stress, violent vibration or liquid intrusion during
transportation, storage or installation.
• Take care of the camera during installation to prevent damage to the
camera case, ports, lens or PTZ mechanism.
• Do not apply excessive voltage. (Use only the specified voltage.)
Otherwise, you may experience electrical shock.
• Keep the camera away from strong electromagnetic sources.
• Do not aim the camera at bright light sources (e.g. bright lights, the sun,
etc.) for extended periods of time.
• Do not clean the camera with any active chemicals or corrosive detergents.
• Do not disassemble the camera or any of the camera's components. If
problems arise, please contact your authorized dealer.
• After long term operation, moving components can wear down. Contact
your authorized dealer for repair.
Supplied Accessories…………………………………………………………………………….
• 3x Zoom USB 2.0 HD Video Conference Camera (1)
• 12V/2.0A DC Power Adapter (1)
• Tripod Mounting System (1)
• Wall Installation Mounting System (1)
• Ceiling Mounting System (1)
Ver 1.1 6/30/14
• USB 2.0 Data Lines (3m), Serial Control Line, RS-232C to RS-485 Cable
• IR Remote Controller
• Control Cable (1)
• User Manual (1)
Rear Board Connectors…………………………………………………………………………
High Definition Interface: USB 2.0
Control Signal Interface: mini DIN-8 (VISCA IN, VISCA OUT/RS485)
Control Signal Configuration: Dip-Switch Pin 7/TTL Signal; Baud Rate: 9600bps
Power Supply Interface: DC 12V Socket
Electrical……….…………………………………………………………………………………….
Power Supply Adapter: 12V DC/2A
Input Voltage: 12V DC (10.5-14V DC)
Input Power: 24W (MAX)
Structure……………………………………………………………………………………………….
Material: Aluminum, Plastic
Dimensions (W x H x D): 4.88 in. (123.952mm) x 5.75 in. (146.05mm)
x 4.75 in. (120.65mm)
Mass: 1.46 lbs. (0.67kg.)
Working Environment: Indoor
Operating Temperature: 32ºF (-0ºC) to 113ºF (+45ºC)
Storage Temperature: -14ºF (-10ºC) to 140ºF (+60ºC)
Color: Silver, Black, White
Ver 1.1 6/30/14
Rear Board & Function………………………………………………………………………..
1. Front View…………………………………………………………………………………….
1. Lens
10x Optical Zoom.
2. IR Receiver
To receive IR remote controller signal.
3. Power LED
Blue LED blinks when unit is powered, Orange LED blinks for Stand-By status.
4. IR Receiver
To receive IR remote controller signal.
Ver 1.1 6/30/14
2. Rear View……………………………………………………………………………………
5. DC IN 12V Socket
Only use the Power Adapter supplied with this camera.
6. IR Receiver
To receive IR remote controller signals.
7. VISCA IN Port
For hard wired remote control from a 3
8. VISCA Out Port/RS485
Used for daisy chaining multiple cameras for RS-232 RS-485 control.
9. USB 2.0 Interface
For connection to PC (USB 2.0 port. Will also function in a USB 3.0 port as USB
2.0 device).
rd
party PC, joystick, etc...
Ver 1.1 6/30/14
3. Bottom View…………………………………………………………………………………
1. Tripod
Will accept 1/4-20 bolt from 3rd party tripod, wall or ceiling mount using
included tripod adapter.
2. Dip-Switches
Used for selecting serial and IR communications settings.
Ver 1.1 6/30/14
Loading...